Reviews Black Heatsink

EKWB EK-M.2 NVMe Heatsink- Black

  • Materials used: – Aluminium front cover – Aluminium backplate – Stainless steel clips.
  • Enclosed: – EK-M.2 NVMe Heatsink front cover – black – EK-M.2 NVMe Heatsink backplate – black – Mounting clips – Thermal pad 0.5mm – Thermal pad 1mm – Thermal pads.
  • PLEASE NOTE: The heatsink is compatible with all single sided type 2280 M.2 NVMe SSDs (22mm wide, 80mm long). The heatsink is compatible with M.2 (NGFF) connectors 4.2mm heigh.
  • PLEASE NOTE: Its mandatory to mount thermal pads on both sides of the M.2 NVMe SSD. The ASUS HYPER M.2 PCIe card just for showcase it is not included!.
Check Stock

GLOTRENDS M.2 Heatsink and Desktop PC Installation Fit for 2280 M.2 PCIe 4.0/3.0 NVMe SSD

  • M.2 heatsink cooler fits for Desktop PC installation. 0.4inch/10mm high m.2 heatsink..
  • Fit for all kinds of M.2 2280 SSD, including M.2 PCIe 4.0 SSD, PCIe 3.0 SSD, and PS5 M.2 SSD, such as WD Black SN850, Sabrent Rocket 4 Plus, Sabrent....
  • Unique dual installation solution: Metal clips + rubber bands for M.2 SSD installation. No need to worry about rubber bands material aging or SSD long....
  • 10°C- 30°C cooling effect (Varies depending on the environment) to keep your M.2 SSD under good performance even full-load operation. M.2 heatsink....
  • A thermal pad is included. To conduct heat from M.2 SSD to M.2 heatsink, the thermal pad is put between M.2 SSD and M.2 Heatsink. It is a low....
Check Stock

GLOTRENDS M.2 Heatsink with M.2 Thermal Pad for 2280 M.2 PCIe 4.0/3.0 NVMe SSD (2 Packs)

  • 2 packs of M.2 heatsink fits for PS5/PC installation. 0.12inch/3mm high m.2 heatsink well fit for PS5 installation as well as PC M.2 Slot..
  • Fit for all kinds of M.2 2280 SSD, including M.2 PCIe 4.0 SSD, PCIe 3.0 SSD, and PS5 M.2 SSD, such as WD Black SN850, Sabrent Rocket 4 Plus, Sabrent Rocket 4, Samsung 980 Pro, Samsung 970 Pro, Silicon Power US70, and etc..
  • Unique dual installation solution: Metal clips + rubber bands for M.2 SSD installation. No need to worry about rubber bands material aging or SSD long time high-temperature operation..
  • 5°C- 20°C cooling effect (Varies depending on the environment) to keep your M.2 SSD under good performance even full-load operation. M.2 heatsink can extend the life of M.2 PCIe SSD..
  • A thermal pad is included. To conduct heat from M.2 SSD to M.2 heatsink, the thermal pad is put between M.2 SSD and M.2 Heatsink. It is a low viscosity, thermal conductivity, and insulation..
Check Stock

DAMOMCO M.2 NVMe PS5 Heatsink - Solid Aluminum Cooler for Playstation 5 SSD NVMe PCIe Console with Thermal Pads,Space Grey

  • ...oove and metal texture create a simple industrial style air guide. Diversion heat dissipation, maximize cooling performance and simplify installation..
  • 【UPGRADE YOUR CONSOLE】-Whether the upgraded material workmanship or the elaborate design of the structure shape, this heatsink is very unique. This heatsink for PS5 replaces the native PS5 console cover so that the heat doesn't get trapped in the metal cover, and combined with the native fan to achieve better cooling effect..
  • 【WIDE COMPATIBILITY】-The PS5 heatsink cooler fits both PS5 Ultra HD and Digital editions. In terms of hardware,It’s compatible with any standard NVMe M.2 solid state drive. Fully tested with WD Black SN850, Samsung 990 980 970 Pro and Rocket NVMe 4.0. It supports 2230, 2242, 2260, 2280 form factor. Please be sure to remove the built-in heatsink before installing our PS5 heatsink..
  • 【PACKAGE CONTENTS】 -Comes with an installation guide as well as screws and thermal tape for easy convenient installation..
Check Stock

60 Pcs 20x15x10mm Black Aluminum Heatsink for TO-220 Transistor

  • Overall Size : 20x 15x 10mm/ 0.8" x 0.6" x 0.4" (L*W*H).
Check Stock

M.2 NVMe Heatsink SSD Cooler for PS5 or Laptop PC Memory Cooling Fin-Red (2 Pack)

  • Size: 2.8 inch x 0.9 inch x 0.1inch (71 mm x22 mm x3 mm). Materials used: Aluminium.
  • Fit for PS5 M.2 PCIe SSD slot . Compatible with M.2 PCIe NVMe 3.0/4.0 SSD, such as Samsung 980/ 970 PRO, WD Black SN850....
  • Unique groove design: Greatly increased cooling area with a cooling effect of 5°C-20°C (varies depending on the environment)..
  • Thermal pad included: placed between M.2 SSD and M.2 heatsink to conduct heat from M.2 SSD to M.2 heatsink. Good thermal conductivity and insulation..
  • Packaging Content: heatsink x 2, silicone thermal pad x 2, silicone band x 4.
Check Stock

Noctua NH-D15 chromax.Black CPU Cooler with NA-HC4 chromax.White Heatsink Covers

  • Bundle includes: 1x NH-D15 chromax.black + 1x NA-HC4 chromax.white (set includes 2 covers for outfitting both fin-stacks).
  • Award-winning Noctua CPU fan bundled with matching heatsink covers for a customised, exceptionally clean look.
  • Ideal for creating neatly designed, premium builds in combination with Noctua’s chromax or industrialPPC line fans.
  • Add colour accents (black, white, red, blue, green or yellow) with optional chromax line accessories (anti-vibration pads, extension and splitter cables).
  • Caution: heatsink covers increase the height and width of the cooler, please refer to the cover specifications for details and make sure that there is enough clearance inside your case!.
Check Stock

60pcs Mini Heatsink Kit, Cooler Heat Sink for Cooling VRM Stepper Driver MOSFET VRam Regulators (8.8mmx8.8mmx5mm) Black

  • ✔black anodized aluminum heatsink， Exquisite workmanship, good heat dissipation, long service life..
  • ✔Small in size, light in weight, size: approx. 8.8 x 8.8 x 5mm(L*W*H).
  • ✔Can be applied for passive cooling of Stepper Drive, MOSFET, VRM, Vram, IC Chips raspberry pi models pi electronics, computers, electrical appliances, and heat dissipation etc..
  • ✔60pcs Small Mini Heatsink Kit+1 thermal adhesive..
Check Stock

RC Motor Cooling Fans Surpass Hobby Twin 30mm RC Car Motor Fan with Metal Cover 4068 4274 Brushless Motor Heatsink for 1/8 1/10 RC Car 40mm 42mm Brushless Motor

  • ▶【Diameter 40MM RC Motor Cooling Fan】 Dual fans with heatsink, designed for 1:8 scale rc car and the rc motor which diameter is 40mm, such as....
  • ▶【Prevent Motor From Overheating】 The speed can reach up to 27000 RPM, excellent heat dissipation effect to protect the motor and extend motor's....
  • ▶【Exquisite Workmanship】 Made of high quality metal material, exquisite workmanship make this cooling fan is durable for long term use..
  • ▶【Unique Design with Extension Cable】 the fan is black body with cool silver and black color heatsink, the fan with extension cable for easy to....
  • ▶【Easy to Install】 Dual cooling fan compatible with carbon fan cover for protecting the rc fans, easy to Install. Notice: The plug is not....
Check Stock

Pastall 100 PCS (8 Different Sizes) Heatsink Kit with Conductive Adhesive Tape, Aluminum Heat Sink Cooler and Copper Heatsink for Raspberry Pi A B B+ 2/3/4

  • ❤ The 100 PCS (8 Different Sizes) heatsink kit with conductive adhesive tape, Easy to use and could effectively provide good heat dissipation..
  • ❤ As a Raspberry Pi heat sink (using as raspberry pi 4 heatsink/raspberry pi 3B+ heatsink), it has good heat dissipation performance and compatible with most Raspberry Pi cases..
  • ❤ The heat sink is equipped with high-performance thermal conductive adhesive, high viscosity, durable and long lasting..
  • ❤ This small heatsink kit included : 80 pcs aluminum heatsink + 20 pcs copper heatsink( It Contains 8 different sizes of heat sink,Please check the specific size on the picture)..
  • ❤ the heatsinks also could be used for Cooling Development Board Laptop CPU GPU VGA RAM VRAM VRM IC Chips LED MOSFET Transistor SCR Southbridge Northbridge Voltage Regulator.It is an excellent heat sink for heat dissipation in electronic DIY,You will love it!.
Check Stock

Intel i3/i5/i7 LGA115x CPU Heatsink and Fan E97379-003

  • DESIGNED FOR THE PS5 CONSOLE: Engineered to fit perfectly and easily into the PS5 console's SSD expansion slot for a quick and easy install..
  • REVOLUTIONARY COOLING: Made from High-Quality CNC'd aluminum, the Sabrent Heatsink for the PS5 console was specifically designed to maximize cooling performance and simplify installation..
  • UPGRADE YOUR CONSOLE! Rather than creating a heatsink that would only trap the heat in the metal cover, we designed a heatsink that replaces the native PS5 consoles cover. This allows for better cooling using the native fan as well as being a larger heatsink..
  • INDUSTRIAL QUALITY: This SSD heatsink method also uses Sabrent's "Sandwich Design" which ensures even pressure throughout the SSD for efficient and consistent heat transfer unlike methods used by other brands..
  • CONVENIENCE: Comes with an installation guide as well as screws and thermal tape for easy convenient installation..
Check Stock

SABRENT M.2 NVMe Heatsink for The PS5 Console (SB-PSHS)

  • DESIGNED FOR THE PS5 CONSOLE: Engineered to fit perfectly and easily into the PS5 console's SSD expansion slot for a quick and easy install..
  • REVOLUTIONARY COOLING: Made from High-Quality CNC'd aluminum, the Sabrent Heatsink for the PS5 console was specifically designed to maximize cooling performance and simplify installation..
  • UPGRADE YOUR CONSOLE! Rather than creating a heatsink that would only trap the heat in the metal cover, we designed a heatsink that replaces the native PS5 consoles cover. This allows for better cooling using the native fan as well as being a larger heatsink..
  • INDUSTRIAL QUALITY: This SSD heatsink method also uses Sabrent's "Sandwich Design" which ensures even pressure throughout the SSD for efficient and consistent heat transfer unlike methods used by other brands..
  • CONVENIENCE: Comes with an installation guide as well as screws and thermal tape for easy convenient installation..
Check Stock

Geekworm 12mm Aluminum Alloy Heatsink (C235) Support 30mm Cooling Fan Compatible with Raspberry Pi Compute Module 4 CM4 Motherboard

  • ✔Geekworm design 12mm aluminum alloy heatsink for Raspberry Pi Compute Module 4 CM4.
  • User manual, refer to Geekworm WiKi search C235..
  • ✔Heatsink dimensions: 54x39x12mm/2.12x1.53x0.47inch.
  • ✔Support install 30mm (3007 or 3010) cooling fan above the heatsink for better heat dissaption.
  • ✔With one piece thermal pad, need to cut proper thermal pad to attach on the CPU of Raspberry Pi Compute Module 4.
  • ✔The C235 heatsink reserve the space to connect the extermal antenna for CM4. ✔The inclcuded PM2.5x16mm screws length is just for install CM4 module and C235 heatsink, no support CM4 IO board..
Check Stock