Reviews Bit Holder

Hardwerks Universal Fit Magnetic Bit Holder, Securely Mounts to Belt Clip Screw, Fits Both Left and Right Side of Driver, for Milwaukee, DeWalt, Makita, Ridgid, Bosch, Ryobi, More (2 Pack, Standard)

  • Don’t get stuck up a ladder without the bit you need! Five storage locations allow you to keep your most used ¼" hex bits on your drill or driver so you always have what you need when you need it. Includes 2 bit holders and mounting screws for all brands. Fits Milwaukee M18, Dewalt, Bosch, Ryobi, Ridgid and Makita drills and drivers. See pictures for specific fitments..
  • Don’t let your bit holder get in your way or stop you from using your belt hook! The Hardwerks bit holder mounts on either the left or right side of your impact driver or drill. Bit holders that only mount on the right side of your tool get in the way when you are grabbing your driver and make bit changes harder. The Hardwerks bit holder works with Milwaukee and Dewalt belt clips as well as available universal belt clips for other brands..
  • Tired of dropping screws, holding them in your mouth or fishing for them in your pocket? Stick your screws securely to the magnet on the side of the holder and easily retrieve them when needed. Need to pre-drill or counter sink a hole? Stick the drill bit to the side magnet and take it with you..
  • Your bit holder won’t rotate, loosen or fall off! Hardwerks bit holder is screwed securely to your drill or driver. Bit holders attached with adhe....
Check Stock

Hardwerks Universal Fit Magnetic Bit Holder, Securely Mounts to Belt Clip Screw, Fits Both Left and Right Side of Driver, for Milwaukee, DeWalt, Ridgid, Makita, Bosch, Ryobi, More (2 Pack, Premium)

  • Phillips, torx, square drive? Stop running around searching for the right bit. Keep them right on your impact driver or drill with five storage locations which you to keep your most used ¼" hex bits with you at all times. Includes 2 bit holders and mounting screws for all brands. Fits Milwaukee M18, Dewalt, Bosch, Ryobi, Makita and some Ridgid drills and drivers. See pictures for specific fitments..
  • Mounts on either side of your tool and works with or without the belt clip. Many bit holders only mount on the right side of your tool so they get in the way when you are grabbing your driver and make bit changes harder if you are right handed. The Hardwerks bit holder works with or without Milwaukee and Dewalt belt clips as well as available universal belt clips for other brands..
  • Wondering where to put loose screws while you are working or how to carry that long drill bit? Stick your screws securely to the exposed magnet on the side of the holder and easily retrieve them when needed. Need to pre-drill or counter sink a hole? Stick the drill bit to the side magnet and take it with you..
  • Upgrade to the premium bit holder for the strongest neodymium magnet available so that even the heaviest bits won’t fall out when your driver is hanging upside down ....
Check Stock

TEKPREM 1/4 Strong Magnetic Extension Bit Holder 5 Pack Hex Shank Screwdriver Bit Driver Set with Portable Case for Holding Screwdriver Bits and Screws

  • [Strong Magnet Tip to Hold Bit and Screws]: These bit holders have very strong magnet tip. The magnetic bit holder provides convenient pick-up and....
  • [60mm Long]: The bit holder length are 60mm 2.36 inch , easy to pick up and change bits..
  • [1/4 inch Screwdriver Bit Holder]:The bit holders are perfect for 1 inch screwdriver bit , accept any 1/4 inch hex style long or short shank bits..
  • [Wide Application]: A must have tool for quick change bits of electric power tools ..
  • [All in One]: 5pack bit holders, packed with plastic case, portable and handy to put in pocket..
Check Stock

Kyuionty 6 Pcs 12 Holes Hex Shank Screwdriver Bit Holder, Plastic Hex Bit Holder Organizer Storage Case, Black

  • Package & Size: 6 pcs x screwdriver bit holder. Total size (L*W): 98 x 10 x 15 mm/ 3.85" x 0.39" x 0.59". Size of hole: 6.35 mm/ 1/4". Hole: 12 holes..
  • Durable Material: The 12 holes bit holder is made of plastic, with simple structure, small and lightweight, sturdy and durable..
  • Product Purpose: The hex bit holder keeps your screwdriver bit in order, never worry about the loss of the bits. It can be inserted 1/4 inch standard bits..
  • Product Feature: The hex shank screwdriver bit holder with small size, will not takes up too much space and it is easy to carry, organize your screwdriver bits neatly..
  • 100% Satisfaction Guarantee: Our products are backed by quality customer service to ensure that your satisfaction is guaranteed. If for any reason you do not like our products, you can return them unconditionally within 90 days and get a full refund..
Check Stock

DEWALT Drill Extension Bit Holder Magnetic Drive Guide Tough Grip Compact DWATGDG

  • The drill bit holder has 1.5-inch sleeve extension for additional fastener support.
  • The magnetic bit holder has a magnet for fastener retention.
  • DEWALT bit holder accepts 1-inch screwdriving bits.
Check Stock

1/4 Pivoting Bit Tip Holder Magnetic Screw Drill Tip Pivot Screwdriver Bit Holder Magnetic Screw Holder Extender Bendable in 20° Angle for Corners or Tight Spots Black 1 Pcs

  • Innovative Design：The Pivoting Bit Tip Holder is designed to be both pivoting and straight models. Slide the metal collar forward then bend it for....
  • Advanced Workmanship: Solid piece of machining makes it easy to get bits and tips in or out. Strong magnetic to hold the bits or tips tight and secure....
  • High Compatibility: The pivot magnetic drill bit holder suitable for common 1/4" hex shank screw bits or tips. 1/4" Shank allows for use in any chuck....
  • Quality Product: The magnetic bit holder is made by premium chrome vanadium steel, which ensures excellent durability. This magnetic screw holder can....
  • Buy With Confidence: Package includes 1 pcs screw bits holder. We stand behind our Magnetic Screwdriver Bit Holder and each single order is 100% Money....
Check Stock

eJiasu 3.8mm Gamebit Screwdriver, 4.5mm Security Bit Set CR-V Steel Security Screwdriver Bit with Rubber Grip Tool for NES SNES N64 NGC SFC SEGA Super Game Boy Cartridge and Console (1set)

  • [One Magnetic screwdriver set]:1 set of Magnetic Security Screwdriver set with Gamebit bits include: 3.8mm Screwdriver Bit +4.5mm Screwdriver Bit +1/4 Inch magnetic Hexagon Socket Wrench holder,this hand tool set is convenient to exchange different security game bits.
  • [1/4 inch Screwdriver Bit Holder]:This socket screwdriver bit holder has magnetic tip that can accept any 1/4 inch hex bits, available for inserting any hex bits and nut drivers firmly. With around 20cm（7.87''） length,it makes your bits long enough to reach deep and more areas. The handle of screwdriver bit holder is green and balck, made of rubber and plastic, which is anti-slip and durable. And the O-shaped hanging hole on the holding handle makes this bit driver set easy to store.
  • [Separate 3.8mm bit off security bit set]:3.8mm driver bit opens Video Game Cartridges for Nintendo(NES), Super SNES, N64, Virtual Boy, Gameboy, Game Boy Color, and Sega Game Gear.
  • [Separate 4.5mm bit off screw driver set]:4.5mm bit opens Video Games cartridges for Sega Genesis, Sega Master System, and Sega 32X as well as systems for SNES , N64, Game Cube (gamecube), Virtual Boy, Nomad, Game Gear, TurboGrafx 16, and TurboDuo.
  • [Stainless safety toolkit for game system cleaning or home repairs]:These high qu....
Check Stock

Magnetic Pivot Drill Bit Holder 2-Pcs 1/4 Quick Release Hex Pivoting Bit Holder with Ring Flexible Magnetic Screwdriver Bit Holder Magnetic Screwgun Bit Tip Holder

  • HIGH-HARDNESS MATERIAL: The magnetic pivot drill bit holder is made of high-hardness chrome vanadium steel, which can withstand the high torque output....
  • 2 WAYS TO WORK: Pull the metal ring to switch to linear mode for sleeve extension, the linear length is 3.5 inches. The 20-degree pivot mode allows....
  • MULTI-MAGNETIC DESIGN: There are magnetic parts inside the pivoting bit tip holder, you can easily fix and remove the bits. The bracket is suitable....
  • 1/4" HEX SHANK: The quick change /release bit holder perfectly matches any 1/4" hex shank screwdriver bit. The perfect tool for fixing screws..
  • CUSTOMER SATISFACTION: The drill bit extension holder is delivered by Amazon and arrives safely and quickly. We will provide up to 90 days of....
Check Stock

Ryobi Bit Set 10 Piece RAK10SD 5132002549

  • Black Oxide Coated Drill Bits Provide Increased Durability.
  • Integrated Pivoting Bit Holder for Easy Bit Removal.
  • Includes: (16) black oxide drill bits, (2) woodboring spade bits, (5) bradpoint drill bits, (32) 1 in. impact drive bits, (4) 2 in. impact drive bits, (1) 3 1/2 in. impact drive bit, (4) impact nut drivers, (1) impact magnetic bit holder, and a clear front carrying case.
  • Included 3.5 in. Impact Drive Bit for extended driving control in hard-to-reach applications.
Check Stock

NEIKO 11403A Magnetic Bit Holder Set | 3 Pieces - 2-3/8 4 and 6| Premium Cr-V Steel | 1/4 Hex Shank Design

  • POWERFUL SCREW HOLDERS: Each piece in this bit-holder set has a 1/4-inch universal hex shaft for an easy fit on most drills. These bit extenders....
  • DRILL-BIT EXTENDERS: This versatile hex-shaft bit extension set features bit holders in 3 sizes: 2 3/18", 4", and 6". The hex-drive bit holders let....
  • PRECISION MAGNETIC BIT HOLDERS: These bit extenders have powerful magnets that securely hold driver bits in place, so you can easily turn any drill....
  • HIGH-QUALITY HEX-BIT HOLDERS: Each piece in the NEIKO 11430A Magnetic Bit-Holder Set is made from chrome vanadium steel with a black phosphate coating....
  • HEAVY-DUTY SPECIALTY TOOLS: Our hex-bit holders feature a uniform single-piece construction for added durability. The single-shaft design keeps drill....
Check Stock

12 Pieces Drill Bit Extension Magnetic Drill Extension Bit Holder 1/4 Inch Hex Shank Automotive Drill Bit Quick Release Screwdriver Extender Adapter Set for Screws Nuts Drill Handheld Driver, 3 Sizes

  • Application: Works with all Dewalt 12V 18V 20V tools, such as drill, driver, impact wrench, hammer drill, surge. As long as your drill has a screw spot, this bit holder will fit it..
  • Humanized Design : This drill bit organizer bottom design could grip up to 5 driver bits firmly, meet your replacement needs even on the go..
  • Installation: Mount this dewalt bit holder on the side of your drill only with 1 screw(included)..
  • Keep Tidy: Every dewalt bit holder can store up to 5 driver bits, bring you a tidy workplace to get rid of fumbling around in a box full of mixed bits..
  • Customer service - If you have any problems for our drill bit holder, please do not hesitate to contact us, we will try our best to reply you a completely satisfying solution within 24 hours..
Check Stock

RYOBI AR2047 Impact Rated Driving with Magnetic Bit Sleeve Set (4-Piece)

  • Black Oxide Coated Drill Bits Provide Increased Durability.
  • Integrated Pivoting Bit Holder for Easy Bit Removal.
  • Includes: (16) black oxide drill bits, (2) woodboring spade bits, (5) bradpoint drill bits, (32) 1 in. impact drive bits, (4) 2 in. impact drive bits, (1) 3 1/2 in. impact drive bit, (4) impact nut drivers, (1) impact magnetic bit holder, and a clear front carrying case.
  • Included 3.5 in. Impact Drive Bit for extended driving control in hard-to-reach applications.
Check Stock

Ryobi A10D07G Black Oxide Drill Bit Set, 7 Pcs

  • Black Oxide Coated Drill Bits Provide Increased Durability.
  • Integrated Pivoting Bit Holder for Easy Bit Removal.
  • Includes: (16) black oxide drill bits, (2) woodboring spade bits, (5) bradpoint drill bits, (32) 1 in. impact drive bits, (4) 2 in. impact drive bits, (1) 3 1/2 in. impact drive bit, (4) impact nut drivers, (1) impact magnetic bit holder, and a clear front carrying case.
  • Included 3.5 in. Impact Drive Bit for extended driving control in hard-to-reach applications.
Check Stock