Reviews Bilge Pump Installation

Shoreline Marine Bilge Pump Plumbing Kit | Plastic Bilge Pump Hose | 2 Stainless Steel Hose Clamps | Easy Installation | Heavy-Duty Marine Accessory

  • ... hose, thru-hull fitting, and 2 stainless-steel hose clamps..
  • HIGH COMPATIBILITY: Irrespective of the size of the boat, this high utility water pump works in accordance with 3/4" x 5" of the plastic bilge hose. This kit contains everything you need for bilge pump installation..
  • EASY TO USE: With a pack of all the essential parts and equipment required to perform the pumping task, this kit makes it one of the best marine boat accessories. It is fast and easy to use..
  • DIMENSIONS: The kit consists of 3/4 inches and 5 inches of plastic bilge pump hose, along with a thru-hull fitting and 2 stainless-steel hose clamps that work efficiently to remove the excess water from the hull. It works wonders with a bilge pump float switch..
  • CALCUTTA OUTDOORS: A leading manufacturer of consumer products for the outdoor sports and recreation market providing performance-driven products, including fishing rods, tackle, coolers, drinkware, outdoor apparel, paddle sports, and marine accessories..
Check Stock

Johnson Pumps - 22102 PROLINE Bilge Pump 1000 GPH 2.5A

  • No one wants to worry that their boat is slowly taking on water because the bilge pump has failed. Well, you can sleep soundly with the reliable 2000 bilge pump on the job.Small size, high efficiency, low current (low cost switching power supply supporting).
  • to achieve a small size perfect combination of high flow..
  • It is non-automatic and must be paired with a float switch or sensor and ON/OFF/AUTO switch. Unique automatic "discharge" function can bear the long-term continuous operation under nearly congestion condition Impact resistant ABS housing.
  • Used in a boat,you can also use it in solar powered waterfall for your backyard, in a battery back-up sump system,etc. It empties the bilge roughly 25% faster than 1500gph bilge pump,and will continue to pump even when it encounters some minor debris.
  • Heavy duty motors with stainless steel shafts and tough. thermoplastic bodies submersible bilge pumps are tough enough for any bilge.Tough, efficient, long life motor.Offer high capacity output Water cooled long-life motors.
  • Ignition protection Water/moisture tight seals.
  • Snap lock strainer base for easy installation and removal.
Check Stock

Boat Marine Manual Hand Bilge Waste Water Transfer Pump Qiilu Plastic Handle Marine Manual Diaphragm Hand Bilge Water Pump for Boat Yacht

  • Excellent Design------Boat Marine Manual Hand Bilge Waste Water Transfer Pump is suitable for compact manual self-priming pump. Provides flow rates up to 12 gallons per minute (45 liters per minute)..
  • Durable and Reliable------Boat Marine Manual Hand Bilge Waste Water Transfer Pump has a robust and durable construction designed for marine applications. Ideal as a backup bilge pump in case your electronic bilge pump fails..
  • Specifications------ Manual Diaphragm Pump, Material: ABS, Diaphragm Manual Pump with Two Position Handle, Packing List: 1 x Manual Diaphragm Pump, 2 Adapters, 2 Seals..
  • Dimensions ------- Hose Inlet: Approx. OD. 1.36" (34.5 mm), Hose Outlet: Approx. OD. 1.36" (34.5mm), Max Suction Lift: Approx. 10ft (3m), Max Discharge Head: 13ft (4m). Flow: 720GPH (2724 LPH).
  • Easy to use------fixed handle with rubber handle, easy to use. Installation can be done without complicated steps..
Check Stock

Premium Bilge Cleaner Concentrate for Boats Marine Boat Cleaner Soap Grease Oil Fuel and More

  • POWERFUL CONCENTRATE CLEANS BILGE AND REMOVES ODORS: Our bilge cleaner is a powerful oil eater that emulsifies boat oil, grease and transmission fluid to keep your bilge clean and odor-free. Simply pour in bilge pumps for boats and our oil eater cleaner degreaser works for emulsifying and deodorizing the bilge tank and bilge hose. This bilge degreaser super cleaner bilge pump cleaner dissolves fuel, sludge, scum and transmission fuel to keep your bilge pump operating smoothly and efficiently!.
  • EMULSIFIES & ELIMINATES GREASE & OIL: This oil eater degreaser works as a super clean degreaser for the inside of your bilge! Bilge pump boat juice is an essential staple to your boat cleaning supplies kit to keep your sludge pump odor free and running properly. Our concentrated oil eater cleaner and degreaser maintains a proper working marine bilge pump and boat bilge pump without harming fiberglass, plastic or metal on your boat. Regular use keeps an automatic bilge pump running smoothly..
  • FAST & EASY TO USE: Simply pour in and run boat for at least one hour. The natural motion of the boat works to scrub the bilge. Then drain or pump out into a container that is in accordance with the law. Repeat process until no sludge remains. To maintain, repeat process once....
Check Stock

Sailortenx Manual Bilge Pump For Boats Kayak Bilge Pump Hand Kayak Water Pump Manual For Boats Bilge Pump Manual Portable Floating Hand Bilge Pump For Kayak Etc

  • [Sturdy Durable] Manual kayak bilge pump is made of plastic, compact and lightweight, very easy to carry. The portable bilge pump Kayak manual is used to evacuate water from inside your kayak or hatch to prevent capsizing or swamping..
  • [Emergency Tool] Just connect the manual marine bilge pump for boats hose to either end of the kayak water pump, so manual bilge pumps kayaks with one end deep in the bilge and ejecting this bilge water overboard..
  • [How To use] Insert the bottom of the boat bilge pump for kayak (or hose) into the water, and use the handle to start pumping. The kayak bilge hand pump sucks water in when you pull the handle out, and disperses the water when you push the handle in..
  • [Ergonomic Design] The ergonomically designed handle is very easy to grip, boat bilge pumps manual is gear shape desingn and features a filtered nozzle to prevent seaweed, leaves and debris from clogging the manual hand bilge pump for boat..
  • [Scene To Be Used] Manual kayaks hand bilge pumps for boating perfect for emergency water removal in small boats, kayaks, canoes or dinghies..
Check Stock

Shoreline Marine Bilge Pump with Float Switch, 800 GPH

  • The pump securely clips into the mounting base for easy installation and for removal to clean and inspect the pump.
  • The self-contained automatic switch will detect water and automatically turn the pump on, when the water is gone shut the pump off.
  • The automatic bilge pump is completely submersible with a water pumping capacity of 800 GPH.
  • The ¾” O.D. outlet hose barb is designed to be used with standard ¾” I.D. bilge hose.
  • It’s ignition protected, uses a very low 5 amps operating current the wires are tinned marine grade.
Check Stock

Attwood 4608-7 Tsunami T800 Bilge Pump, 800 GPH, 12-Volt, Barbed ¾-Inch Diameter Outlet, 29-Inch Wire

  • What you will get: the package contains 1 piece of 12 V boat bilge water pump and 1 piece of automatic boat bilge pump float switch, nice combination for you to drain the water easily.
  • Basic parameters: the flow of the pump is 1100 gallons per hour, the flow rate is 1100 GPH, the voltage is 12 V DC, and the head is 13 ft (4mts).
  • Outlet diameter: 1-1/8 inch/ 29 mm, cable length: 3.3 ft/ 1 m.
  • The float switch's max amps 12 volts: 20 A.
  • The wire length is 3.3 ft/ 1 m, the wire gauge size is 18 AWG.
  • Electric bilge pump: the electric bilge pump is great for you to drain water efficiently, which has a good motor and help drain the water efficiently.
  • It is a good forhydraulic systems fed with cold water and can be applied in line to be fed by gravity or pressure.
  • Automatic boat bilge pump float switch: the float swith is automatic, it will turn the boat bilge pump on when water level reaches 2 inch (51 mm), and it will turn the pump off when water level reaches 0.7 inch (19 mm).
  • It is good flow sensor for bilge pumps, and it features with a removable base for easy cleaning.
  • Wide range of application: the boat bilge pump and automatic float switch can be applied for fishing boats, cruisers, runabouts, yachts and mo....
Check Stock

AMRJ-32903 Mayfair Cartridge Bilge Pump - 1000 GPH

  • Mayfair Cartridge Bilge Pumps make cleaning and maintenance easy! Cartridge Bilge Pumps can be removed for cleaning or replacement without the use of a single tool..
  • Lift a tab on the top, give the cartridge a twist, and pull it out.
  • that's all there is to it! Includes all-in-one motor/impeller unit with no loose parts. Feature a thermoplastic body, lip seal shaft seal and a stainless steel motor shaft..
  • 12V cartridge bilge pump with high impact housing. Easy installation and increased longevity. Corrosion, chemical and fuel resistant..
  • Permanent magnet motor along with permanent lubrication. T-Slot for easy float switch attachment.
  • 1000 GPH, 3/4" Outer diameter discharge port, 5 Amp Fuse Size. Picture shows the 1000 GPH pump..
Check Stock

AMRJ-32503 Mayfair Cartridge Bilge Pump - 500 GPH

  • Mayfair Cartridge Bilge Pumps make cleaning and maintenance easy! Cartridge Bilge Pumps can be removed for cleaning or replacement without the use of a single tool..
  • Lift a tab on the top, give the cartridge a twist, and pull it out.
  • that's all there is to it! Includes all-in-one motor/impeller unit with no loose parts. Feature a thermoplastic body, lip seal shaft seal and a stainless steel motor shaft..
  • 12V cartridge bilge pump with high impact housing. Easy installation and increased longevity. Corrosion, chemical and fuel resistant..
  • Permanent magnet motor along with permanent lubrication. T-Slot for easy float switch attachment.
  • 500 GPH, 3/4" Outer diameter discharge port, 5 Amp Fuse Size. Picture shows the 1000 GPH pump..
Check Stock

Whale BE9003 Electric Field Sensor Switch, 12V or 24V, Suitable for Up to 20 Amps

  • Precision switch automatically activates and shuts off bilge pumps when water reaches specific levels.
  • Worry-free, precise operation ensures proper bilge pumping and provides peace of mind.
  • Automatically activates bilge pump when 2 inches of water is sensed.
  • Turns pump off when water level drops below ½ inch.
  • Two color-coded wires make installation easy.
  • Two test circles can be used to ensure activation.
  • Offers side or base mounting, can operate with 12V or 24V power, and it is suitable for up to 20 amps.
Check Stock

Boat Bilge Water Pump 12 V 1100 GPH Electric Marine Bilge Pump and Automatic Boat Bilge Pump Float Switch 12 V 24 V 32 V for Boats, 2 Pieces in Total

  • Strong and Long-life Motor - The high quality bilge pump's motor will do a good help when you drain the water. This 1100 GPH electric bilge pump would improve work efficiency and could be used for a long term..
  • Waterproof Material and Safety Assurance - The casing of the pump is made of ABS, which is durable and waterproof. All wire ends and terminals with heavy duty marine sealant and located above the highest possible water level by fastening with insulated staples or plastic straps..
  • Wide Application - Our electric bilge pump can be used in aquarium, fishing boats, fountain, runabouts and other places to easily drain the water.
  • Quick to Install - With the compact size and universal mounting hole positions, it is easy and quick to finish the installation..
  • Easy to Clean - The pump comes with a clear instruction, it can be easily for you to operate. Follow the instructions carefully and your pump will provide you with the maximum output and the life for which it war designed..
Check Stock

AMRM-4505-7 Attwood Sahara Automatic Bilge Pump - 500 GPH

  • The Attwood Sahara Bilge Pump is a durable, compact, and easy to install automatic bilge pump. The Sahara has everything contained in one compact yet durable package, making this pump a great option for tight spaces. This series of bilge pump features a 316 stainless steel motor shaft for corrosion resistance and a durable high-impact, glass-filled polyester impeller. The base of the pump has quick, one-handed removal for easy disassembly for cleaning..
  • Pumps include 36" lengths of 16-gauge caulked and tinned copper wire. An automatic-switch bilge pump is a requirement for any vessels 20’ especially those that accommodate overnight passengers and crew. All Attwood bilge pumps come with a 3 year manufacturer's warranty..
  • Mercury-free switch. Test knob for easy operational check Non-restrictive float movement. Larger filter area resists clogging.
  • Free flow of water around housing keeps motor cool. 316 Stainless Steel motor shaft for saltwater corrosion resistance. Durable high-impact, glass-filled polyester impeller.
  • Sahara S500 Part #: AMRA-4505-7, GPH at Open Flow: 500, GPH at 3.3' Head: 350, Hose Size: 3/4" I.D..
Check Stock

Hand Bilge Pump Manual Hand Water Pump for Kayaks Canoes and Boats Emergency Hand-Operated Marine Bilge Pump with Reversible Hose

  • ⛵HAND BILGE PUMP FOR BOATS: Our manual bilge pump length is 17", and the maximum unfolded length is 28.3", which is easy to store and takes up minimal space. It’s the perfect boating accessory for kayaks, canoes, dinghys and small boats. Our bilge pump remove water quickly and downward strokes for maximum efficiency and less fatigue.
  • ⛵MAKES WATER REMOVAL EASIER & FASTER: Our hand water pump features a 34.6" long hose with a 1.16" intake nozzle and 1.37" diameter hose that makes reaching the bottom of your boat easier and removing excess water faster. This hand suction pump works great to remove water from the bottom of a motorboat, canoe or dinghy.
  • ⛵EASY TO USE: Just simply connect the hose to the end of the pump, insert the bottom of the pump into the water, and use the handle to start pumping. It sucks water when you push the handle in, and disperses the water when you pull the handle out!.
  • ⛵NO CLOG FILTER & ANTI-LEAK DESIGN GASKET: Our marine bilge pump Features a filtered nozzle to prevent seaweed, leaves and debris from clogging this hand water pump. And The premium rubber sea....
Check Stock