Reviews Big Block Intake Manifold Gasket

New MLS Head Gasket Set, Head Bolt Kit, Intake & Exhaust Engine Valves Compatible with 99-05 SAAB/SUBARU 2.5L 2458CC H4 SOHC, (16 Valve),”EJ25″

  • Aftermarket OE Replacement : Meets or exceeds OE standard quality and performance requirements..
  • COMPATIBLE WITH: 1999-05 Subaru Saab 2.5L 2458CC H4 “SOHC” (16-Valves) Eng.Code “EJ25”.
  • Includes : MLS (Multi-Layered Steel) Head Gasket (Improved Design) Intake Manifold Gaskets Exhaust Manifold Gaskets Valve Cover Gaskets Spark Plug Tube Seals Grommets Viton Valve Stem Seals Camshaft Front Seals Circular Plug (Valve Cover) EGR Valve Gasket Throttle Body Mounting Gasket Other Small Gaskets, Seals, And O-Rings Head Bolt Set (12 Pcs) RTV Gasket Silicone (Silicone brand may vary depending on availability) Intake & Exhaust Valves (16 Pcs).
  • Note : Upper Intake Manifold Gaskets (Plenum Gaskets) are “NOT” Included.
  • CONFIRM THIS PART FITS YOUR VEHICLE BEFORE PURCHASING (Check Fitment Data Above).
Check Stock

Tektall Intake manifold adapter for TBI adapts a small block 1.75" bore throttle body injection 1" thick Fits Pattern 2-barrel Manifold 500 350 CFM early carbs Alloy Durable

  • 【Fitment】Tektall Alloy Intake manifold adapter for TBI adapts a small block 1.75" bore throttle body injection 1" thick Fits Pattern 2-barrel Manifold 500 350 CFM early carbs..
  • 【Good Quality】 It is made of solid alloy with high finish. The installation hardware and installation sealing gasket are as shown in the figure. It can be installed without purchasing additional bolts. Everything you need is in the package, as shown in the picture. Please use studs if possible, do not over-tighten, and the correct design is suitable for its intended application without vacuum leakage..
  • 【High performance】 Tektall intake manifold adapters are threaded into smooth aluminum castings to safely install carbohydrate studs. The shape of the holes provides a smooth transition from carbohydrates to air intakes. Just turn the key and it will start immediately. It will definitely improve your throttle response..
  • 【Package includes】 1 X Intake manifold adapter, 2 X Gaskets, 1 X Mounting Hardware kit, 1 X Manual..
  • 【NOTE】 Please confirm the item if it matches your machine before you purchase. All Tektall products will undergo strict inspections and strong packaging before shipment.Please rest assured to purchase.Thanks..
Check Stock

Carburetor Intake Manifold Boot,for Yamaha Big Bear 350 Yamaha Warrior YFM 350 YFM350 1987-2004 ATV Carb, by NAKAO

  • ➤[Replace]: Replace your old cracked and broken intake boot. Perfectly connects the carburetor and the engine, provides new power for better operation Replace Part Number：3HN-13586-02-00, 3HN-13586-01-00..
  • ➤[Fitment]: This Carburetor Intake Manifold Boot Fits for Yamaha warrior 350 YFM350 1987-2004, Yamaha MOTO-4 350 YFM350 1987-1990, Yamaha MOTO-4 350 YFM3501992-1995, Yamaha Big Bear 350 YFM350 4WD 1993-1996,Yamaha Big Bear 350 YFM350 2WD 1996-1998, Yamaha Kodiak 400 YFM400 4WD 1996-1998, Yamaha wolverine 350 YFM35F 1995.
  • ➤[Installation]:This Carburetor Intake Manifold Boot installation is super easy and Direct fitment and perfect replacement,meets or exceeds OEM standards.fit for warrior 350 intake boot, yamaha warrior intake boot, warrior 350 intake, yamaha intake manifold, wolverine intake boot, warrior 350 parts, warrior carb boot, banshee intake boots, banshee carb boots, intake manifold, efi yamaha warrior 350 part, yamaha warrior banshee parts, yamaha warrior carburetor, intake manifold rubber boot.
  • ➤[Package include]: 1x Intake Manifold, 1x Carburetor O-Ring ,2x spring pads , 2x Bolts, 2x Washers, 2x Nuts. please check it befor carefully to make sure it is what you need..
  • ➤Providing high quality and professional parts with great serv....
Check Stock

Intake Manifold Runner Control Motor - Compatible with 2015-2018 Hyundai Sonata 2.4L 4-Cylinder

  • Compatible with or fits: 2015 - 2018 Hyundai Sonata 2.4L 4 Cyl.
  • Direct replacement - this replacement intake manifold runner motor matches the fit and function of the original equipment motor on specified vehicle....
  • Directly replaces the original motor ~ Made of quality materials and components for long-lasting, reliable service ~ Original Equipment Quality.
  • Package Contents: 1 Engine Intake Manifold Flap Motor.
Check Stock

BATONECO Polished Airgap Intake Manifold High Rise Dual Plane Compatible with SBC Chevy 350 400

  • 100% NEW - Made of high-quality aluminum material, Natural Intake Finish, Package Contents: Intake Manifold..
  • COMPATIBILITY - Intake Manifold Compatible with Chevy Small Block SBC 350 400..
  • ADVANTAGE - Basic Operating RPM Range: Idle-5500.
  • FEATURE - intake manifolds are the perfect performance upgrades for your engine. These cast-aluminum manifolds are pressure-tested for leaks..
  • DESIGN - The intake manifolds feature a high-flow runner design to deliver improved power from idle to 5500 rpm..
Check Stock

FEL-PRO VS 50442 R Valve Cover Gasket Set

  • BRTEC Automotive Replacement Head Gasket Sets Package List- Head Gasket, Intake & Exhaust Manifold Gasket, Valve Cover Gasket, Viton Valve Stem Seals/ Grommets, Other O-Rings/ Seals, Other Small Gaskets, and Other Engine Sealing Kits.
  • ( Please refer to the first image to confirm the components you may receive, we always check every package before shipment, please massage us for a replacement if there are missing parts after you receiving the package )..
  • Head Gasket Part Number: ES71313, HS26181PT, HS26181PT-1, HS26181PT-3, TS2618100HBSI.
  • Check Before Purchasing - Please check the d....
Check Stock

Dokili High Rise Single Plane Intake Manifold for Small Block SBC Vortec 350

  • 【Fitment】Dokili aluminum intake manifold for small block engines using the 1996 and later Vortec (Gen 1+) cylinder heads..
  • 【Features】Dokili intake manifold comes with 360° single plane and high rise designs, providing excellent high RPM power, from 3,000 to 7,500 RPM. It features four corner water ports, a tapped fifth port in the front face, nitrous bosses and dual distributor holddowns..
  • 【Premium Material】Built with natural finish aluminum of superb quality and fit. Permanent mold casting. Angles and straightness comparable to factory manifolds. The port size on this manifold is 2.06" x 1.18". Manifold Height is 6.06"..
  • 【Superior Design】Cast-in bosses on intake runners can be drilled and tapped for use with nitrous. Dual distributor hold-down provisions for extra protection against distributor rotation. Ideal port position allows custom porting for maximum power..
  • 【Package Include】1X SBC Intake manifold. Professional installation in highly recommended..
Check Stock

E-Tuner 4

  • EFI Fabricated Intake Manifold with Fuel Rails and Throttle Body Short, Silver.
  • Compatible With: Chevrolet Small Block V8 Gen. III/IV (LS-based) · 4.8 L / 293 In3 (L20, Ly2) · 5.3 L / 325 In3 (Lc9, Lh6, Lh8, Lmg, Ly5) · 6.0 L / 364 In3 (L76, L96, LFA, LY6) · 6.2 L / 376 LN3 (L92, L99, LS3, LSA)Rectangle Port Intakes only!.
  • Fabricated Aluminum Sheet Metal Intake Manifold -102MM Throttle Body -Fuel Rails & Cross Over -4-Bolt LSX - Gaskets & Hardware are included..
  • Throttle Body is Dive by Cable Overview We Designed Our Fabricated Aluminum Sheet Metal Intake Manifold to Improve the Look and Performance of Your LS Engine..
Check Stock

Dorman 615-380 Engine Intake Manifold for Select Buick/Chevrolet Models OE FIX

  • Improved design - this intake manifold has been redesigned to correct a common PCV valve failure in the original equipment design to reduce excessive....
  • Complete kit - this manifold includes a new throttle body gasket, port gaskets, fuel injector O-rings, MAP sensor O-ring and screws for a complete....
  • Quality American construction - this intake manifold is engineered and manufactured in the United States of tough nylon polymer to resist cracking and....
  • Related repair - this manifold often leads to failure in the valve cover's PCV diaphragm.
  • a damaged valve cover will often need to be replaced at the....
  • Ensure fit – to make sure this part fits your exact vehicle, input your make, model and trim level into the Amazon Garage.
Check Stock

TYFYB High Rise Vortec Single Plane Intake Manifold Aluminum For SBC Intake Manifold 350 Single Plane Modified 3000-7500 RPM Range

  • High Rise Intake Manifold；Satin Finish；Single Plane；Height: 6.060 in；RPM Range: 3,000-7,500+；Intake Material: Aluminum；Single plane design intended for serious street and race applications.
  • For sale is a new high rise single plane intake for small block Chevy，Big power for mid to upper RPM ranges，Ideal for high performance and race applications.
  • These intakes are produced from steel molds to reduce core shift, have all the major features found on the expensive ones such as 4 corner water outlets and nitrous bosses..
  • 360° single plane high rise design for outstanding power from 3000 to 7500+ RPM.
Check Stock

MOTO988 Carb Joint Intake Manifold Boot For Kawasaki Bayou 250 2003-2011 Bayou 220 1988-2002

  • ★High Quality: The main body of our Carburetor intake manifold boot is made of high-density rubber material, which has the advantages of corrosion resistance, high temperature resistance, friction resistance, longer service life, and longer service life..
  • ★Compatible Models: The carburetor intake manifold boot work with Kawasaki ATV Bayou 250 - KLF250 2003-2011 Kawasaki ATV Bayou 220 - KLF220 1988-2002.
  • ★Package content: You will receive these accessories after purchase: 1 x Intake Manifold Boot；1 x Gasket；2 x Screw.
  • ★Tips: Please carefully confirm your model and whether it is within the scope of application before purchasing, please refer to the applicable type and OEM number on the page..
  • ★After-Sales Service Guarantee: If the product you receive is defective or damaged and cannot be used, you can contact us at any time. We will try our best to solve it for you. We are committed to providing customers with the highest quality products and services as our goal..
Check Stock

Dokili Aluminum Satin Intake Manifold for Small Block SBC 305 327 350 400 1957-1986

  • 【Fitment】Dokili aluminum intake manifold for Small Block 1957-86 SBC Ch.e.v.y..
  • 【Feature】Dokili intake manifold comes with dual-plane designs, providing power over a wide RPM range, from 1,500 to 6,500 RPM. The size of the port holes: 1.23" x 1.99". Bolt Hole Pattern: 5.160" x 5.625"..
  • 【Dual plane】Dual plane designs have two smaller plenums that receive air from the carburetor or throttle body, which results in a higher velocity through the booster making the engine more responsive to the driver..
  • 【Premium Material】Built with natural finish aluminum of superb quality and fit. Angles and straightness comparable to factory manifolds..
  • 【Note】This intake manifold Will not fit under Corvette hood. Professional installation in highly recommended..
Check Stock

ARP 4352001 Intake Bolt

  • ARP Intake Manifold Bolt Kit Big Block Chevy P/N 435-2001.
Check Stock