Reviews Bevel Gearbox Manufacturer

DEWALT Miter Saw, Double-Bevel, Compound, 12-Inch, 15-Amp (DWS716)

  • POWER AND DURABILITY: 15 amp, 3,800 rpm motor.
  • MITER DETENT PLATE IMPROVES PRODUCTIVITY AND ENSURES CUTTING ACCURACY: Adjustable stainless steel miter detent plate with 14 positive stops.
  • MITER DENTENT OVERRIDE that allows you to override the miter stops and adjust to the desired setting without the saw slipping into the miter detents.
  • EASIER BEVEL CUTS: Tall sliding fences support crown molding up to 6-5/8-inch nested and base molding up to 6-1/2-inch vertically against the fence while easily sliding out of the way for bevel cuts.
  • CROSS CUT CAPACITY up to 2×8-Inch dimensional lumber at 90° and a 2×6-Inch dimensional lumber at 45°.
  • DOUBLE BEVEL DESIGN: Double bevel design allows saw to bevel left and right 0 – 48 degree with positive stops at 0, 33.9, 45, and 48 degrees both left and right allowing user to flip the saw not the material.
  • OPTIMIZED CUTTING ACCURACY: Innovative gearbox and belt-drive design increases vertical cutting capacity. Precise miter system and machined-base fence support optimized cutting accuracy.
  • LIGHTWEIGHT & PORTABLE: Lightweight design, head lock-down pin, and built-in carry handle for portability.
  • INCLUDES carbide blade, blade wrench, dust bag, vertical clamp and comfortable side handles in the base.
Check Stock

Bang II (Feat. Uppercase 5ive)

  • Fully milled gearbox housing made of 6061-T6 aluminum for the rear axle of ATOPRC.
  • Due to its dimensional stability results in a higher load capacity and service life of bevel gear and ball bearings. The problem of the torn fastening thread has an end with this case.
  • The bearing adapters are included in the set.
  • We recommend gluing the bearings with threadlocker y0113. For mounting the bearing adapters in the housing we recommend Bindulin silicone y19015. To use HD differential shafts y1477, the Atoprc bearing adapters must be machined.
Check Stock

PowerSmart 20V Max Power Tool Combo Kits Cordless Drill Set Compact Driver Circular Saw Reciprocating Saw LED Flashlight Saw Combo Kits With 2 Lithium-Ion Batteries included 4-Tool

  • 【Drill Driver】 21 setting clutch and dual speed gearbox gives you control over your drilling power. Produces up to 45 N/m torque, which can handle....
  • 【Reciprocating Saw】 Intended: This reciprocating saw is fitted with a powerful 20V Li-ion battery,for precise cutting in a wide variety of....
  • 【Circular Saw】Adjustable Cutting Depth and Angle: 0-45°bevel capacity allows for bevel cuts for a multitude of applications. The adjustable depth....
  • 【Customer Satisfication】 All of our products qualify for a 2 years warranty, Our service team will provide premium service to help solve any....
Check Stock

Evolution Power Tools R185SMS+ 7-1/4\ Multi-Material Compound Sliding Miter Saw Plus

  • Without changing blades, This saw is designed to cut a wide range of materials.
  • Powerful 10 amp hi-torque motor with optimized gearbox & blade system.
  • Includes laser guidance, 10 ft power cord, 3 piece Clamp, integrated carry handles, and dust bag.
  • 8- 1/4in x 2- 1/2in max cross cut capacity with a 0° - 45° bevel tilt and a 50˚ - 50˚ miter that covers all common cutting angles accurately.
Check Stock

Lesco 101186 High Wheel Walk-Behind Fertilizer Spreader with Gearbox Repair Kit (Bundle, 2 Items)

  • Bundle includes 2 Items: (1) Lesco 101186 High Wheel Walk-Behind Spreader with (1) Gearbox Repair Kit.
  • Lesco Gear Repair Kit includes 1 x Seal (# 030384), 1 x Gear Cap (# 030593), 1 x Bevel Gear (# 030594), 1 x Pinion Gear (# 030595), 1 x Roll Pin (# 060019), 1 x Roll Pin (# 060022), 2 x Seals (# 030385).
Check Stock

Shop Fox W1888 10\ Hybrid Table Saw With Riving Knife, White

  • The 15A optimised gearbox and blade system increases motor and blade life to cut through a variety of materials including steel, aluminium, wood, even wood with embedded nails and plastic, all with just one blade that comes included with this table saw..
  • Rip cutting, assisted by an adjustable, full-length, parallel fence with measuring rail guide ensures reliable smooth square cutting every time. Set the blade to the desired angle up to 45 degrees bevel tilt and up to 60 degrees miter which covers all common cutting angles..
  • Raise and lower the blade height for trench cuts with this folding table saw. Achieve 3-1/4 in. depth of cut at 90° and 2-1/4 in. depth of cut at 45° bevel..
  • The included 28T Japanese TCT saw blade (tungsten carbide tipped blade) allows the table saw to cut effortlessly through steel, aluminium, wood with embedded nails, plastic and more.
  • For added safety, the included push stick offers safer operation when handling off cuts and the huge saw table features left and right table extensions to support wide work-pieces with a table surface area of 47-1/4 x 25-3/16 inch..
  • The all in one Rage 5-S table saw offers a collapsible frame with wheels for easy storage and portability meaning there is no need for use of a miter saw stand..
Check Stock

Chisel / Mortise Chisel Set - 4-pcs by Narex

  • Made by a small tool manufacturer in the Czech Republic.
  • Blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to Rc 59.
  • In 2008 FWW earned Author's Choice for Best Value.
  • Contains the following sizes: 4 mm, 6 mm 10 mm and 12 mm.
Check Stock

Narex 50 mm (2 Inch) Woodworking Cabinetmaker's Chisel with Beech Handle 810150

  • Made by a small tool manufacturer in the Czech Republic.
  • Blade is made from fine-grained, nicely tempered chrome-manganese steel and hardened to Rc 59.
Check Stock

Husqvarna 530096099 Line Trimmer Gearbox Genuine Original Equipment Manufacturer (OEM) Part

  • This part is compatible with models including.
  • 358791072,358791590,358791070,MC125,358791071,SST250,XT700,358796121,PP125 TYPE 1,PP125 TYPE 2,PP125 TYPE 3,XT700 TYPE 1,XT700 TYPE 2,SM705 TYPE 2,SM705 TYPE 1,PP125E,944515581,944515580,358796160,PP428S,PPB200E TYPE 2,PPB32SST TYPE 2,PPB200E TYPE 1,PPB32SST TYPE 1,358791580,358791980,944516661,944516662,P4500F,358795820,358795821,358795822,MC125 TYPE 2,MC125 TYPE 1,944515570,944516660,PP125,SM132LE TYPE 2,PPB200,PPB200E,358791050,P4500F TYPE 1.
  • Gearbox 530096099 contains the gears that turn the line spool for cutting.
  • Genuine Original Equipment Manufacturer (OEM) part. Compatible Brands: Craftsman,Poulan,Weed Eater,Husqvarna,Mcculloch.
  • This gearbox (part number 530096099) is for line trimmers.
  • Wear work gloves to protect your hands when installing this part.
Check Stock

Mini Table Saw for Crafts 4 Blades Metal Chop Saw 96W Adjustable Cut Depth 7-speed Power Supply Portable Cut Off Table Saw for Woodworking Plastic Metal

  • The 15A optimised gearbox and blade system increases motor and blade life to cut through a variety of materials including steel, aluminium, wood, even wood with embedded nails and plastic, all with just one blade that comes included with this table saw..
  • Rip cutting, assisted by an adjustable, full-length, parallel fence with measuring rail guide ensures reliable smooth square cutting every time. Set the blade to the desired angle up to 45 degrees bevel tilt and up to 60 degrees miter which covers all common cutting angles..
  • Raise and lower the blade height for trench cuts with this folding table saw. Achieve 3-1/4 in. depth of cut at 90° and 2-1/4 in. depth of cut at 45° bevel..
  • The included 28T Japanese TCT saw blade (tungsten carbide tipped blade) allows the table saw to cut effortlessly through steel, aluminium, wood with embedded nails, plastic and more.
  • For added safety, the included push stick offers safer operation when handling off cuts and the huge saw table features left and right table extensions to support wide work-pieces with a table surface area of 47-1/4 x 25-3/16 inch..
  • The all in one Rage 5-S table saw offers a collapsible frame with wheels for easy storage and portability meaning there is no need for use of a miter saw stand..
Check Stock

Evolution Power Tools R255SMSDB+ 15 Amp 10 in. Premium Dual Bevel Sliding Miter Saw w/Laser and Multi-Material Cutting Blade

  • Multi-Material - Premium Japanese Tungsten Carbide Tipped (Tct) Blade Included Cuts Wood, Steel, Aluminum, Wood With Embedded Nails, Plastic & More.
  • Powerful – 15A Motor Optimised Gearbox And Blade System, Increases Motor And Blade Life To Cut Through A Variety Of Materials With Ease.
  • Accurate - Precision Cutting With Laser Guidance, Trench Cut Facility, 11-13/16" Slide, 0˚ - 45˚ Double Bevel And 50° - 50° Mitre Settings, Covers All Common Cutting Angles.
  • Features - Large 11-13/16" X 3-1/2" Cutting Capacity, Ergonomic Horizontal Trigger With Comfortable Grip, Integrated Carry Handles For Easy Transportation And 13Ft Cable.
Check Stock

Narex Czech Steel 3 piece set 6 mm, 10 mm, and 12 mm Mortise Chisels by Narex

  • Made by a small tool manufacturer in the Czech Republic.
  • Blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to Rc 59.
  • Contains the following sizes: 6 mm 10 mm and 12 mm.
  • Handles made from stained European Beechwood.
Check Stock

Narex Czech Steel Premium 4 pc set 6 (1/4), 12 (1/2), 20 (3/4), 26 (1) mm Chisels w/Hornbeam Handles

  • Made by a small tool manufacturer in the Czech Republic.
  • Blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to Rc 59.
  • Handles from from super hard European Hornbeam.
Check Stock