Reviews Betafpv Elrs 4- BestItemr.com

BETAFPV ELRS LiteRadio 2 SE Radio Transmitter Remote Controller with Built-in 1000mAh 1S Battery for FPV RC Racing Drones Multirotor Sim Joystick Calibration - Mode 2 Left Throttle

【ExpressLRS 2.4G Protocol】BETAFPV ExpressLRS 2.4G LiteRadio 2 SE radio transmitter is the World's First ELRS radio controller. It comes with build-in ELRS 2.4G TX, which can achieve long-range flying with your drones.
【BETAFPV Configurator】This transmitter supported BETAFPV Configuration with the function of radio controller setup, Full function of the ExpressLRS configuration, Channel mixer for fix wing drones, and firmware update.
【Performance】This ELRS 2.4G protocol radio transmitter built-in 1000mAh 1S battery, you can charge it by type-c cable instead of replacing battery. It has a total of 8 channels. Supports 3 RF powers of 25mW, 50mW and 100mW, and packet rates of 50Hz, 150Hz, 250Hz and 500Hz.
【FPV Simulator】This transmitter has the function of FPV simulator like other versions of LiteRadio 2, which can act as a USB Joystick when connected to a personal computer, suitable for FPV novices to play FPV simulators like EREADRONE.
【About Bind】The stock firmware of the TX module manufactured by our company is ELRS V1.0.0-RC5(the fifth release candidate version) and the Lite receiver and Micro TX Module is V1.1.0.
Please note that the firmware version of the Transmitter and the receiver or the TX module should be the same one and the....

Check Stock

BETAFPV SPI ELRS F4 1-2S 12A AIO Brushless Flight Controller V2.2 with BMI270 Gyro BB51 BLHeli_S Hardware Compatible for 1-2S UltraLight 3" Toothpick Drones, 85mm Whoop Drone, Cetus X 2S Drone

...r V2.0/V2.1, the V2.2 version has updated gyro with BMI270 gyro in place of ICM20689 gyro to prevent Z-axis data from being unreadable in Betaflight configurator. Note: ONLY the newest Betaflight firmware 4.3.1 start to support this BMI270 gyrometer..
【Application】BETAFPV SPI ELRS F4 1-2S 12A AIO Brushless Flight Controller V2.2 is the default FC for Cetus X, also great for 1-2S UltraLight 3" Toothpick Drones like HX115 and 85mm whoop drone like Meteor85. It will provide pilots with more smoother and more powerful fly experience..
【Configuration】Built-in current meter, 2 programmable RGB LEDs, and SPI ELRS receiver. At the same time, all the pads are left for the external receivers with UART1 and UART2, for buzzers, etc. Large pads are reserved for solder motor cables, this design will make solder easier..
【BB51】This V2.2 board is powered by BB51 BLHeli_S hardware. If you want to setup the ESC specification, please use the BLHeliSuite16714902A_Beta or ESC-Configurator..
【Technical Support & Warranty】BETAFPV has a professional team and conside....

Check Stock

BETAFPV LiteRadio 3 RC Radio Transmitter with Nano Module Bay for External TX Module Support Simulator Joystick Calibration Firmware Update for RC Models Multirotor Airplane Drone - Frsky Mode 2

...justable in height, it is long longevity up to 120k times rotations. The potentiometer is positioning accuracy and fast response sensitivity, bringing a good experience to your flight.
【Nano Module Bay】LiteRadio 3 reserved a nano bay on the backside, it supports CRSF protocol external TX module. Highly recommend BETAFPV ELRS Nano Module, which is compatible with the LiteRadio 3 radio transmitter and makes CRSF protocol available.
【Long Use Time】Equipped with a built-in 2000 mAh 1S battery and charging module, you can charge by USB and it can work up to 15 hours without an external module. Meanwhile, it designs a Low-Power warning to indicate a low battery. It indicates a low battery and needs to be re-charged if the blue light flashes slowly and the buzzer beeps continuously.
【BETAFPV Configurator Supported】LiteRadio 3 upgrades with BETAFPV self-developed Customized LiteRadio System. Pilots can directly operate the Joystick Calibration and Firmware Update on the radio transmitter or BETAFPV Configurator. BETAFPV Configurator is a utility designed to simplify updating, configuring, and tuning the radio transmitter. Easy and convenient, further to fulfilled your different fly requirement.
【FPV Simulator Supported】LiteRadio 3 is ergonomic an....

Check Stock

BETAFPV M03 Ultralight and High Output Power 25-350mW 5.8G VTX with IPX Type of Antenna Provides a Stable Image and Strong Transmission Compatible for ExpressLRS 2.4G 65-85mm Whoop Drone

【High Output Power】The switchable power of BETAFPV M03 5.8G VTX includes 25mW, 100mW, 200mW and 350mW, achieves long-range flying, provides a....
【Application】M03 VTX is perfectly suitable for the 65-85mm whoop drone for longer range flying. We highly recommend using it with ELRS 2.4G FC....
【Easy to Install】M03 VTX features a JST0.8 connector, which is compatible with camera like BETAFPV C02 and NewBeeDrone BeeEye, IPX type of antenna....
【Ultralight】M03 5.8G VTX has a tiny size and 1.13g ultra-lightweight, is perfectly suitable for the 65-85mm whoop drone. The screw mounting holes....
【SmartAudio】M03 VTX could use the Smart Audio port to change the band and channel, the output power could be changed via the power button and the....

Check Stock

PowerHobby 1s 250mAh 45C 8-Pack Flight Time and Power Battery Upgrade - Fits All: Blade Nano QX QX FPV Tiny Whoop UMX Radian Blade Inductrix Champ Sport Cub S Nano CP S Inductrix FPV

【Specification】- Material: Lithium Polymer.
Max cont. Discharge: 60C , Max Burst(C-rate/current): 120C..
【Dimensions】- 51mm x 11.5mm x 6.5mm Appr. (L x W x H).
【Application】- GAONENG GNB 1S 300mAh LiPo Battery 60C 120C 3.8V with PH2.0 Connector is suitable for 65mm FPV Drone, BetaFPV Meteor65 Pro ELRS, Cetus FPV, iFlight Alpha A65, Happymodel Mobula6 HD, Emax NanoHawk, Crazypony Moblite6, NewBeeDrone AcroBee65, URUAV UR65, Mini Indoor Whoops, E-flite Blade BNF Inductrix, Tiny Whoop, RC Toy, Brushed Racing FPV, Brushless Quads, Quadcopter etc..
【Voltage Note】- Be sure charging and use in safety. Do not leave when charging. In order to keep battery for long cycle life, do not overcharge more than 4.3V and do not over discharge below 3.4V..
【What You Get】- GNB GAONENG 1S 300mAh 3.8V Lipo battery 6 pieces, stickers 1 piece and instruction 1 piece. If you have any doubt, please don’t be hesitated to contact us, we will reply you within 24 hours..

Check Stock

BETAFPV 4pcs 1103 11000KV Brushless Motors FPV 2S Motor RC for 2S Lipo Battery 2S Frame Beta75X Whoop Drone

Betafpv 1103 brushless motors are suitable for Betafpv 2S frame racing drone by BETAFPV Hobby, which is the first brushless motor reach to 11000KV..
Size of motor: 13.5mm*13.5mm*16mm. Weight: 3.25g/1pc. Shaft Diameter: 1.5mm..
Voltage: 7.4V, 2S Lipo battery. KV (rpm/V): 11000..
The motor mount holes of 1103 motor is 8.5mm, for Betafpv 2S FPV frame only, not for the other 80-110mm frame..
Please read the Precautions and Recommend Parts before built a quadcopter drone. It is better for beginner to build under a experience FPV player. If....

Check Stock

BETAFPV LiteRadio 1 Radio Transmitter with CC2500 System 8CH Remote Controller Support FPV Simulator Compatible for FPV Racing Drone Fly and FPV Beginners Teenagers - Frsky D8 Mode 2

...re Gimbals】Two grip styles for pilots, LiteRadio 1 Radio Transmitter comes with thumb stick ends out of the factory, which features a flat surface and larger space to be able to roll thumbs around. Besides, we prepare two pinch stick ends in the package for those who like to control between fingers and thumbs..
【BETAFPV Configurator】BETAFPV Configurator supported, you can adjust the channel settings, switch protocol or upgrade firmware for LiteRadio 1 on the BETAFPV configurator. For BETAFPV Configurator installation package, please visit BETAFPV offical site..

Check Stock

AFUNTA Propeller Blades Protection Guard Cover and Props 5X Sets Compatible X4 H107C H107D Quadcopter - Black/Red

【Material&Colors】Made of PC material, durable and more power violent. Comes with 4 colors including white, transparent blue, transparent yellow....
【Compatible Drones】31mm 3-blade props are an available option for BETAFPV Meteor65, Beta65 Pro, Beta65X etc.
【Suitable Motors】Perfect match with 0802 22000KV motors, you will get completely different powerful and smooth flight experience of 1S brushless....
【Weight&Size】Only weighs 1.0g/set. 31mm 3-blade propellers with 1.0mm shaft inner diameter.
【Package&Support】Includes 16pcs 31mm 3-blade propellers(8CW+8CCW). Anything problem with your BETAFPV items please feel free to contact us.

Check Stock

BETAFPV Beta65S Lite Frsky D8 1S Tiny Brushed Whoop FPV Drone with Camera V3 Flight Controller Built-in receiver Support Two Modes

【Tiny Drone】 BETAFPV 65S Lite brushed whoop drone is the smaller FPV Drone 25g (without battery), suitable for most controllers on the market..
【Equipment】The Flight time 3-4 minutes (1S 300mAh recommended). This BETAFPV 65S Lite drone is came up with C02 Micro Camera bring you a clearer....
【Upgrade & Sturdiness】Beta65S Lite has been upgraded Brushed FC V3 Frsky D8 with 7x16mm brushed motors， make drone have better flight....
【Small and light】 The tiny drone Beta65S Lite is a perfect indoor drone. It can be easily operated in a small space. It is compact and portable....
【Humanized design】The structured style and four propeller brackets ensure safe flight and protect you from the physical injury of the rotating....

Check Stock

BETAFPV C02 FPV Micro Camera 1/4’’ CMOS Sensor 1200TVL 2.1mm Lens NTSC FOV 160 Degree with Global WDR for Micro Whoop Drone Like Meteor Cetus Series Drones

【Application】BETAFPV C02 FPV micro camera comes with 1200TVL resolution and 1/4" CMOS sensor, it ensures a high-quality and clear image. Global....
【Ultralight Weight】2.1mm lens, FOV 160° beyond the wide-angle for recording more wide and beautiful scenes while minimizing the weight to 1.45g.
【Plug-N-Play】Feature a JST-0.8 connector. Very easy to install with the plug-and-play design, it's a great choice for BETAFPV F4 1S AIO FC, and....
【Suitable Drones】Best match with M01, A01 and M03 VTX, suitable for all brushed and 1S brushless micro drone like Beta65S, Meteor65, Meteor75,....
【Ultra-light Combo】You will receive an injection molding micro canopy, more durable and not easy to break, which is the perfect combo with C02 FPV....

Check Stock

Drone Flight Simulator : Zombie Warfare 3D

【FPV Simulator】Compared with other remote controllers, LiteRadios 2SE has the function of FPV simulator which can acts as a USB Joystick when connected to a personal computer. So you could use it to play FPV simulators like EREADRONE..
【Built-in Battery】 The LiteRadio 2 SE continued working time for a fully charged battery is about 8 hours, bringing an excellent endurance performance and enjoy control..
【Joystick Calibration】 Manually calibrate the joystick. The LiteRadio 2 SE joystick data may offset and can calibrate after it has been used for a period of time (if joysticks are hit by physical)..
【System Upgrade】Updates with BETAFPV self-developed LiteRadio System.Player can directly operate the Joystick Calibration and Upgrade Firmware on the radio transmitter，which is more convenient for the beginner racer to operate..

Check Stock

BETAFPV 4pcs 1204 5000KV Brushless Motor 3-4S FPV Motor for 2-3inch Micro Quadcopter FPV Racing Drone

【Compitable Drones&FC】1204 5000KV motor is one of the best motors for 2-3inch FPV Racing Drone like HX115, also perfect for BETAFPV 12A AIO FC,....
【Brand-new Design】The first betafpv motor to adopt all-new unibody bell shape design with Standard mounting pattern at the bottom, adapt to all....
【Performance】Super durable and ultra-light unibody bell shape. The sturdy structure and high-quality materials make it performs like a beast.
【Reliable Support】Please kindly contact us before negative comment or return, we will provide technical support to solve all your product issues.

Check Stock

Blade Replacement Main Frame: Inductrix BL, BLH8856

40mm 1.0mm Shaft 4-Blade props are an available option to the stock propellers for Inductrix FPV Plus, BETAFPV Beta75S, Beta75 Pro 2..
The diameter is 40mm. This propeller could fit perfectly into 75mm frame with 1.0mm shaft, like Beta75 Pro 2 or Beta75S..
Product material: Clear Plastic. Color: blue, transparent pink, transparent red, transparent yellow.
Inner diameter: 1.0mm Shaft. Height: 7.2mm.

Check Stock