Reviews Bent Axle Balancer

Shorty's Skate Tool The Wench

  • Fitment: Locks flywheel in place when removing harmonic balancer on 6.6L Duramax engines with Allison automatic transmissions..
  • Function: Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement..
  • Duramax 2500 / 3500 Pickups (Toothed pieces only): Removes metal spring-loaded inspection plate on the bottom of the transmission. Tool should slide into opening toward engine with the top of the tool engaging the teeth of the flywheel..
  • Duramax 4500 / 5500 Trucks (Toothed pieces with screws): Remove the rubber inspection cap on the bottom of the transmission. Insert the tool at the front of the opening to engage the flywheel and hand tighten bolt to hold tool in place..
  • 36mm 12-point Socket: Use with 3/4" square drive to remove harmonic balancer bolt and retorque on installation. 36mm 12 point socket can also be used on axle..
Check Stock

Derby Worx Pro Rail Rider Tool Compatible with Pinewood Derby Cars

  • bent polished pine derby axles (2 axles), bent 2.5 degrees for steering or canting wheels.
  • Convenient Easy Turn screw driver slot so you can easily turn the axle without damaging it..
  • Pine derby polished axles with burrs and crimp marks removed, head angled minimizes friction.
  • Two (2) Official axles from the official scout kit.
  • Pre-bent BSA axles with Easy Turn screw driver slot saves cost of an axle bender tool and pliers.
Check Stock

Pinewood Pro Bent Pine Derby Official Axles - Polished 2.5 Degree Bend with Easy Turn Screw Driver Slot 2 axles

  • bent polished pine derby axles (2 axles), bent 2.5 degrees for steering or canting wheels.
  • Convenient Easy Turn screw driver slot so you can easily turn the axle without damaging it..
  • Pine derby polished axles with burrs and crimp marks removed, head angled minimizes friction.
  • Two (2) Official axles from the official scout kit.
  • Pre-bent BSA axles with Easy Turn screw driver slot saves cost of an axle bender tool and pliers.
Check Stock

Oregon Precision Blade Balancer, Balances Blades After Sharpening, Universal Metal Zinc Die Cast Design Improves Longevity of Mowers, For All Lawnmower Blades, Fits Stihl, Troy & More

  • Universal precision high quality blade balancer: Balances lawnmower blades after sharpening, for reduced vibration and engine wear.
  • One for all fit: Designed to fit almost any lawnmower make and model.
  • Increase the life of your mower: Verifies unbalanced and bent blades, providing a smoother cut when used frequently.
  • Static balancing blade for ease of use: Created with top quality zinc die-casting, provides more durability than competing plastic or other metal cones.
  • Includes: 1 x Oregon Universal precision mower blade balancer.
Check Stock

Bent 2.5 Degree Pine Derby Axles with Easy Turn Screw Driver Slot – Polished Graphite Coated for Rail Rider and Canting Axles 2 axles

  • Official Axles Bent 2.5 degrees, Polished and graphite-coated (2 axles).
  • Shaft of axle is graphite-coated to minimize friction. Axle head is not coated..
  • Screwdriver slot cut in axle head to easily turn the axle with a screwdriver.
Check Stock

Bent 1.5 Degree Pine Derby Axle with Easy Turn Screw Driver Slot – Polished Nickel Plated PRO Grooved Steering Axle 1 Axle

  • One single 1.5 degree pre bent pinewood derby polished axle to adjust pinewood derby car steering.
  • Convenient Easy Turn screw driver slot cut in the head to easily turn the axle without damaging it.
  • Exclusive nickel plated finish minimizes friction so your car is super fast.
  • Angled underside of axle head minimizes wheel/axle contact area.
  • Two grooves - Reduces friction and wheel wobble while providing a graphite store.
Check Stock

Pinewood Pro Pre Bent 1.5 Degree Steering Axle with Easy Turn Screw Driver Slot – Nickel Plated Graphite-Coated for Derby Cars 1 - one axle

  • ONE axle, bent 1.5 degrees to adjust pine derby car steering.
  • Polished, nickel plated and graphite-coated to minimize friction.
  • Convenient screw driver slot for easy turning.
  • Angled underside of axle head minimizes wheel/axle contact area.
  • Two grooves - Reduces friction and wheel wobble.
Check Stock

Dorman 594-006 Harmonic Balancer , Black

  • Ideal replacement - this harmonic balancer assembly exactly matches the fit and function of the original harmonic balancer for a direct replacement.
  • Durable construction - this harmonic balancer features a rubber vibration damper bonded between ductile steel components.
  • Cost-effective solution - this balancer assembly offers original equipment quality at a competitive price.
  • Quality tested - this harmonic balancer has undergone dimensional verification, material validation and functional testing to ensure performance.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

Harmonic Balancer Puller Kit, Car Replacement Engine Crank Pulley, Portable Harmonic Balancer Puller Without Threaded Hol，Compatible with GM/Jeep/Chrysler, etc

  • 【Time-Saving Tool 】 Compatible harmonic balancer pullers (without threaded holes) do not require disassembly of the radiator. This is a unique buckle attachment that can be removed without fixing the tie rod to the balancer. Make the damper easy to disassemble..
  • 【Wide Compatibility Crankshaft Puller】Compatible with GM engine models: 5.3 L, 5.7 ls1 6.0 LS2 6.2 LS3 7. Engine models compatible with Chrysler/Dodge: 3.5 L V6, 3.6L V6, 4.7 L V8, 5.7 L V8, 6.1 L V8. Not applicable to 1997 or earlier general LT (5.7L LT1003c4) series engines (threaded holes), not applicable to 2018 and newer Coyote balancers..
  • 【Crank Pulley Removal Tool with Clamp-in Design】 The tool adopts a "clamp-in" design, which can be disassembled without fastening the puller to the balancer, and is compatible with Jeep/GM/Chrysler/Dodge, etc..
  • 【Balancer Puller Made of Carbon Steel 】Using special carbon steel material, the surface is sprayed with anti-corrosion paint, which is corrosion-resistant and durable.The tool has enough weight and strength to ensure that it will not break during use. Save unnecessary cost, time and energy, remove dampers or harmonic balancers. remove dampers or harmonic balancers..
  • 【Easy-to-use 25264 Harmonic Balancer】Remove the harmonic balance....
Check Stock

Dorman 594-321 Engine Harmonic Balancer for Select Dodge Models

  • Ideal replacement - this harmonic balancer assembly exactly matches the fit and function of the original harmonic balancer for a direct replacement.
  • Durable construction - this harmonic balancer features a rubber vibration damper bonded between ductile steel components.
  • Cost-effective solution - this balancer assembly offers original equipment quality at a competitive price.
  • Quality tested - this harmonic balancer has undergone dimensional verification, material validation and functional testing to ensure performance.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

Dorman 594-012 Engine Harmonic Balancer Compatible with Select Models

  • Ideal replacement - this harmonic balancer assembly exactly matches the fit and function of the original harmonic balancer for a direct replacement.
  • Durable construction - this harmonic balancer features a rubber vibration damper bonded between ductile steel components.
  • Cost-effective solution - this balancer assembly offers original equipment quality at a competitive price.
  • Quality tested - this harmonic balancer has undergone dimensional verification, material validation and functional testing to ensure performance.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

Dorman 594-209 Engine Harmonic Balancer Compatible with Select Models

  • Ideal replacement - this harmonic balancer assembly exactly matches the fit and function of the original harmonic balancer for a direct replacement.
  • Durable construction - this harmonic balancer features a rubber vibration damper bonded between ductile steel components.
  • Cost-effective solution - this balancer assembly offers original equipment quality at a competitive price.
  • Quality tested - this harmonic balancer has undergone dimensional verification, material validation and functional testing to ensure performance.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

Dorman 594-017 Engine Harmonic Balancer Compatible with Select Models

  • Ideal replacement - this harmonic balancer assembly exactly matches the fit and function of the original harmonic balancer for a direct replacement.
  • Durable construction - this harmonic balancer features a rubber vibration damper bonded between ductile steel components.
  • Cost-effective solution - this balancer assembly offers original equipment quality at a competitive price.
  • Quality tested - this harmonic balancer has undergone dimensional verification, material validation and functional testing to ensure performance.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock