Reviews Bending Radius Gauge

StewMac String Action Gauge And Ruler Metric Stainless Steel - Designed by StewMac The Original measuring tool for acoustic and electric guitar and bass setup

  • Quality material: these guitar gauge set is made of stainless steel with rounded off edge, rustproof and corrosion-resistant, won't scratch or hurt....
  • Foldable feeler gauge: the feeler gauge applies tempered steel, measurement ranges from 0.0015 inch/ 0.038 mm to 0.035 inch/ 0.889 mm, a common....
  • Understring radius gauge: comes in 9 sizes: 7.25 inch, 9.5 inch, 10 inch, 12 inch, 14 inch, 15 inch, 16 inch, 17 inch, 20 inch.
  • String action gauge ruler: the pocket-sized gauge ruler is marked with metric and imperial scale respectively on 2 sides, can be applied to measure....
  • Notched radius gauge: includes 2 narrow radius gauges and 2 wide radius gauges in 7.25 inch, 9.5 inch, 10 inch, 12 inch, 14 inch, 15 inch, 16 inch, 20....
Check Stock

4pcs Stainless Steel Radius Fillet Gauge Concave Convex Measuring Tool R0.3-1.5/ R1-6.5/ R7-14.5/ R15-25

  • The radius fillet gauge Made of stainless steel, this radius gauge is durable and resistant to rust..
  • This radius gauge has two types of leaves so it can check both convex and concave surfaces..
  • Each leaf is clearly marked, convenient to identify which leaf you need..
  • There are four radium gauges in different shapes and sizes to meet you various need..
  • Very useful gauge for tool & die makers, machinists, and many other worker to check the radius of tools..
Check Stock

Jiayouy Set of 12 Pieces Luthier Tools Set Guitar Neck Notched Straight Edge 9pcs Guitar Radius Gauge String Action Gauge Ruler Fret Rocker for Guitar and Bass Setup Tool

  • Guitar maintain and repair set: you will get 9 Understring Radius Gauge 1 piece guitar neck notched string measurement ruler 1 piece string action ruler and 1 fret rocker string height gauge, different tools can satisfy your needs easily..
  • The guitar measuring tools are made of stainless steel with smooth edges that have no burrs, anti-rust and scratch-prevent, durable to serve your guitar for a long term..
  • Guitar Neck Notched Straight Edge Designed to check guitar neck straightness of the fretboard and frets, the fret rocker can span over 3 frets and can check if frets are on the same level, works well with most guitar..
  • String action gauge ruler: comes in 8.9 x 5.1 cm/ 3.5 x 2 inch, Pocket-size body, you can take it anywhere. measure string height, bridge height, nut slot depth, bridge slot depth and pickup height..
  • 9 Understring Radius Gauge including: 7.25", 9.5", 10", 12", 14", 15", 16", 17" and 20" radius can be applied to measure fret board radius, saddle radius, nut radius from either the top or the bottom radius surface..
Check Stock

Wokape 6Pcs 5 Sizes Stainless Steel Radius Gauge with Feeler Gauge Kit, 5 Sizes Metric and Imperial R0.3-1.5/ R1-6.5/ R7-14.5/ R15-25/ R26-80 Arc Fillet Concave Convex Gap Measuring Tool

  • 【What You Get】 ------ In this kit, You will get 5 different Sizes Stainless Steel Radius Gauge, Including R0.3-1.5/ R1-6.5/ R7-14.5/ R15-25/ R26-80 , Each sizes has 1Pcs. These Radius Gauge can meet all your various need. With Stainless Steel Feeler Gauge Dual Marked Metric (0.04-0.88 mm, 32 Blades)..
  • 【High Quality】 ------- This radius gauge is made of high quality stainless steel, durable, high hardness and resistant to rust. There is some anti-rust oil on the stainless steel feeler gauge to prevent it from rusty, please don’t worry about that..
  • 【Stainless Steel Radius Gauge Excellent Design】------- The 360-degree Locking Screw design allows you to unfold or fold it easily. Each leaf is clearly marked, convenient to identify which leaf you need..
  • 【 Stainless Steel Feeler Gauge Sizes 】------- Metric sizes (mm): 0.04, 0.05, 0.06, 0.08, 0.10, 0.13, 0.15, 0.18, 0.20, 0.23, 0.25, 0.25, 0.28, 0.30, 0.33, 0.35, 0.38, 0.40, 0.43, 0.45, 0.48, 0.50, 0.53, 0.55, 0.58, 0.60, 0.63, 0.65, 0.70, 0.75, 0.80, 0.88. Inch sizes: 0.0015, 0.002, 0.0025, 0.003, 0.004, 0.005, 0.006, 0.007, 0.008, 0.009, 0.010, 0.010, 0.011, 0.012, 0.013, 0.014, 0.015, 0.016, 0.017, 0.018, 0.019, 0.020, 0.021, 0.022, 0.023, 0.024, 0.025, 0.026, 0.028, 0.030, 0.032, 0.035..
Check Stock

KAKA Industrial SBG-40 Heavy-Duty Universal Bender High Capacity Flat Bar Square Bar and Round Bar Metal Bender Combination of Scroll Radius and Angle Bending,Metal Scroll Bender Metal Bender

  • Multi functional for Angle Bending, Radius Bending and Scroll Bending.
  • Material Stop and Angle Stop make the repeat bending easy.
Check Stock

Vankcp Guitar Luthier Tools, 32 Blades Feeler Gauge, 9 Understring Radius Gauge, 4Pcs Notched Radius Gauge, 1Pcs String Action Gauge Ruler, 2 Fingerboard Guards for Guitar and Bass Setup

  • 32 Blades Feeler Gauge: Made of stainless steel, measuring range: 0.0015 inch/ 0.04 mm to 0.035 inch/ 0.88 mm, It can measure the height of the pickup and strings, the unevenness of the fingerboard etc...
  • 9 Understring Radius Gauge: Set of 9 including: 7.25", 9.5", 10", 12", 14", 15", 16", 17" and 20" radius, It can be applied to accurately measure fret board radius, good for Guitar and Bass Setup maintain and adjustment..
  • 4Pcs Notched Radius Gauge: Include 2 narrow radius gauges and 2 wide radius gauges in 7.25”, 9.5”, 10”, 12”, 14”, 15”, 16”, 20 ” radius, stays parallel to the fingerboard, quickly and accurately find the curvature of a fingerboard or bridge with these radius gauges without taking the strings off..
  • 2Pcs Fingerboard Guard: Two different sizes: Large: 3.2 '' * 0.9 '' Small: 3.2 '' * 0.5 '', Prevents scratching or damaging to guitar or bass fretboard when filing and polishing frets..
  • 1Pcs String Action Ruler: Size 3.5'' X 2'' (L * W), marked with metric and imperial scale respectively on 2 sides, etch printing on double sides, accurate and clear to measure string height, bridge height, nut slot depth, bridge slot depth and pickup height..
Check Stock

OriGlam R0.3-1.5 Radius Gauge Set, Stainless Steel Metric Radius Gauge Fillet Gage, Portable Concave Convex Measuring Tool for Tool and Die Makers Check

  • 【High Quality】All the radius gauge are made of high quality steel, heat processed with chrome finish, high strength, good resilience, elegant appearance..
  • 【Measuring Range 】R0.3-1.5mm is 0.3/ 0.4/ 0.5/ 0.6/ 0.7/ 0.8/ 0.9/ 1.0/ 1.1/ 1.2/ 1.3/ 1.4/ 1.5..
  • 【Scope Application】This radius gauge is widely used in home improvement, machine installation, Electric equipment, Suitable for tool and mold manufacturers, Mechanics and many other workers to check the tool radius of the meter, Measure the thickness or width of screw, Valve, Bearing ect..
  • 【Easy to use】: The radius measuring instrument has two types of leaves, each leaf is clearly marked, convenient to identify which leaf you need..
  • 【Application】They measure accurately and have almost no errors, will help you quickly and easily check the radius of tools. Very useful gauge for tool & die makers, machinists, and many other worker to check the radius of tools..
Check Stock

Mophorn 12.6 in Slip Roll Roller Metal Plate Bending Round Machine Slip Roll Machine Up to 22 Gauge Steel Sheet Metal Roller Slip Rolling Bending Machine with Two Removable Rollers

  • Durable & High Capacity: Rollers constructed of precision ground steel Slip Roll provids strength and stability while forming your sheet metal. For....
  • Portable Handle Crank: Large handle crank and hardened, heavy-duty gearing give you the mechanical advantage to roll mild steel up to 22 gauge. Mounts....
  • Removable Rollers: The upper axis of our slip roll machine can be easily pulled out in order to take out the processed work piece. Two detachable....
  • Adjustable Rolling Radius: Adjustable knobs allows the operator to adjust the spacing distance between rollers to control the radius of ends and to....
  • Wide Application: Our slip roll machine not only reels but can also cone the materials. The form bender is a useful tool for press bending ornamental....
Check Stock

Cavnewt Hat brim bender,Hat rack,Hat shaper,Hat organizer for baseball cap,Hat pins for fitted hats,Fitted hats for men,Hat curving band,Hat bender brim,Hat curving tool,Fitted hat,Caps

  • 【Easy to use】Insert the hat into the hat bending tool and leave it for more than 24 hours, the curve of the brim can be perfectly displayed. Use the hat bending tool to stand for more than 24 hours before participating in activities or wearing a hat, and the curve after bending is perfect..
  • 【No environmental restrictions】The hat bending machine is easy to carry and can be used on the table, door hat rack, hat hook, and can also be used outdoors.
  • 【Sturdy and durable】The hat shaper uses high-quality abs, which is flexible in bending and will not be easily broken, caught by the door, and will not break.
  • 【Two options】The hat stylist has a large radius of 2.5 inches and a small radius of 2 inches. The edge bending machine has two bending radii to choose from, and the shape after bending is different..
  • 【Wide Applicable】The hat bending tool is suitable for all visor hats,suitable for sun hats,baseball caps,fishing hats,hunting hats,cowboy hats,sun hats,casual hats, Ashland Cap,Canvas Mesh-Back Cap,Pizza Hat,Trucker Mesh Cap.
Check Stock

Holmes Bronze Series 8 ft. x 7 ft. White Garage Door with Plain Windows

  • Garage Door Tracks 2" Horizontal with 15" curved radius with .075 (color-coded green) gauge steel for 7' high doors. Includes curved tracks, horizontal tracks, and Angles. Nuts, and bolts are NOT INCLUDED.
  • Completely compatible with the lighter .055 or .060 gauge tracks, but are heavier duty. They do not bend or wear as easily.
  • IMPORTANT: When ordering horizontal tracks be sure to verify the track radius. If you order tracks with the incorrect radius the radius will not be returnable because the cut of each radius is unique to the straight track and angle. If you are installing new tracks on a door, you can follow this general rule for selecting the horizontal track radius. For 15" radius tracks, you will need 15" of headroom, the distance from the top of the door to the lowest part of the ceiling..
  • UNIVERSAL FIT: This set of left and right door top section tracks fits 2-inch roller garages. The universal garage track set is ideal for most American garage doors of up to 7-feet tall and is compatible with most brands, including Amarr, Clopay, Chi, Midland, North Central, Garaga, Overhead Door, Ideal, and Ray Nor, Wayne Dalton, and more.
  • Scope of application: sliding garage door, sectional lift garage door, electric garage door, remote garage door, st....
Check Stock

VEVOR Sheet Metal Brake 36 In. Metal Bender Brake 910 mm Length Portable Metal Bender 0-90 Degrees & WEN 3650 4.0-Amp Corded Variable Speed Swivel Head Electric Metal Cutter Shear

  • Product 1: Mini Metal Sheet Brake: Max. Bending width: 36 inches/910 mm.
  • Max. Bending thickness: 0.04 inches/1 mm. Our metal sheet brake is a great tool to bend your metal sheets, with its extraordinary bending performance making itself quite a necessary tool in factories and workshops..
  • Product 1: 0-90° Flexible Bending: You can adjust to a specific angle between 0° and 90° according to your work needs. The metal bender brake is ideal for bending heavy foils and light gauge metals. Bending material gauge up to 20 gauge mild steel & 14 gauge aluminum..
  • Product 1: Two C-Shaped Clamps & Knobs: Effortless bending can be achieved through adjusting two lengthen handles. Pre-drilled touting holes allow mounting on the bench. And two C-shaped clamps are provided.
  • you can fix the brake with clamps conveniently..
  • Product 1: Heavy Steel Construction: The sheet metal bending brake is well-built with premium steel. Solid construction will stand for many years of heavy use. And it's compact and portable.
  • you can easily bring it from home to your job site..
  • Product 2: Pressure sensitive trigger cuts anywhere from 0 to 2500 strokes per minute.
  • Product 2: Attack up to 20 gauge stainless steel and 18 gauge sheet metal.
  • Product 2: Lightweight design limits fatigue d....
Check Stock

Mophorn 24 in. Slip Roll Roller Metal Plate Bending Round Machine, Slip Roll Machine Up to 16 Gauge Steel, Sheet Metal Roller, Slip Rolling Bending Machine with Two Removable Rollers

  • Durable & High Capacity: Rollers constructed of precision ground steel Slip Roll provids strength and stability while forming your sheet metal. It is for metal forming on metal plate up to 610mm/24" in wide x 1.2mm thick(flat)..
  • Portable Handle Crank: Large handle crank and hardened, heavy-duty gearing give you the mechanical advantage to roll mild steel up to 16 gauge. Mounts easily to a bench..
  • Removable Rollers: The upper axis of our slip roll machine can be easily pulled out in order to take out the processed work piece. Two detachable rollers with 3 wire-grooves..
  • Adjustable Rolling Radius: Adjustable knobs allows the operator to adjust the spacing distance between rollers to control the radius of ends and to accommodate for various thickness in sheet metal..
  • Wide Application: Our slip roll machine not only reels but can also cone the materials. The form bender is a useful tool for press bending ornamental iron, mild steel, aluminum and other metals..
Check Stock

Glarks 4 Pack R0.3-1.5/ R1-6.5/ R7-14.5/ R15-25 Radius Gauge Set, Stainless Steel Radius Fillet Gage Portable Concave Convex Measuring Tool for Tool and Die Makers Check

  • ★【What You Get】: In this radius gauge set, it include 4 pack radius fillet gage which measuring range are R0.3-1.5mm, R1-6.5mm, R7-14.5mm, R15-25mm. They are well packed in a plastic box, easy for carry and store..
  • ★【High Quality】: All the radius gauge are made of high quality steel, heat processed with chrome finish, high strength, good resilience, elegant appearance. Surface polished smooth, applying anti-rust oil to prevent rust and corrosion..
  • ★【Measuring Range Detail】: R0.3-1.5mm is 0.3/ 0.4/ 0.5/ 0.6/ 0.7/ 0.8/ 0.9/ 1.0/ 1.1/ 1.2/ 1.3/ 1.4/ 1.5.
  • R1-6.5mm is 1/ 1.25/ 1.5/ 1.75/ 2/ 2.25/ 2.5/ 2.75/ 3/ 3.5/ 4/ 4.5/ 5/ 5.5/ 6/ 6.5.
  • R7-14.5mm is 7/ 7.5/ 8/ 8.5/ 9/ 9.5/ 10/ 10.5/ 11/ 11.5/ 12/ 12.5/ 13/ 13.5/ 14/ 14.5.
  • R15-25mm is 15/ 15.5/ 16/ 16.5/ 17/ 17.5/ 18/ 18.5/ 19/ 19.5/ 20/ 21/ 22/ 23/ 24/ 25..
  • ★【Easy to use】: The radius measuring instrument has two types of leaves, each leaf is clearly marked, convenient to identify which leaf you need. So it can check the convex and concave surfaces. The convex pattern is used to detect the concave surface arc, and the concave template is used to detect the convex surface arc..
  • ★【Application】: They measure accurately and have almost no errors, will help you quickly and easily che....
Check Stock