Reviews Bench Plane

5-pack of 2 Inch Wide Replacement Bench Plane Blades - for No. 4 & No. 5 Iron Bench Planes by all Major Brands

  • 5-pack of 2" replacement blade for No 5 and No 4 bench plane (fits all top brand bench planes that are 14 inches long in length).
  • Bench plane blades are 7.5 inches long, 2.0 inches wide and is 0.0787 inches thick.
  • The blades are manufactured from selected High Carbon Steel - fully hardened and tempered to take and hold a razor sharp edge even on hardest woods.
  • The blades will need to be sharpened as they are only beveled with an accurate ground edge of 25º.
  • Each blade is individually wrapped in wax paper and a plastic sleeve for preservation.
Check Stock

Big Horn 19318 2 Inch Wide Cutter Replacement Blade for Jack Plane No. 4 & 19316

  • Hardened tempered steel gives precision ground cutter edge durability.
  • Pre-sharpened | For Bench and Jack Planes.
  • Caution: Plane irons are extremely sharp. Take care when replacing them into plane.
  • Replacement Blade for Jack Plane No. 4 & 19316.
Check Stock

Stanley 7 Jointer Plane 2.3/8In 1 12 007

  • General purpose bench plane for workshop, site or fine finishing.
  • Chrome carbon steel cutter hardened and tampered to retain a keen cutting edge.
  • Finger tip adjustment for depth of cut and cutter alignment.
Check Stock

STANLEY Hand Planer, No.62, Low Angle Jack (12-137)

  • Iron of the hand planer for woodworking is made from extra-thick 1/8-inch (3.18 mm) A2 steel for excellent edge retention.
  • The wood plane has a cherry wood handle and knob for comfort.
  • The bench plane has norris type adjustment for ease of use.
  • Adjustable throat plate for different types of wood.
Check Stock

STANLEY Hand Planer, No.4, Smoothing (12-136)

  • Iron of the hand planer for woodworking is made from extra-thick 1/8-inch (3.18 mm) A2 steel for excellent edge retention.
  • One-piece base and frog of the wood plane virtually eliminate chatter.
  • The bench plane has a cherry wood handle and knob for comfort.
  • Norris-type adjuster with lateral locking feature.
  • Adjustable throat plate for different types of wood.
Check Stock

DCT Woodworking Plastic Bench Dogs 4-Pack – Workbench Peg Brake Stops for 3/4in Holes in 1/2in or Thicker Material

  • STABILIZE YOUR WOODWORKING PROJECT: Use the DCT Woodworking Plastic Bench Dogs 4-Pack – Workbench Peg Brake Stops for 3/4" Holes in 1/2" Inch or Thicker Material to turn your workbench into a nonslip work platform to provide a flat surface that securely holds your woodworking stock in place for maximize leverage.
  • Ensures stationary workpiece immobility preventing your workpiece from slipping or moving on your workbench so you can safely focus on your project.
  • VARIOUS APPLICATIONS: 1-7/16-inch (3.7cm) low profile for 3/4-inch (1.9cm) round hole in a 1/2-inch (1.3cm) or thicker material.
  • For use in light-duty and medium-duty applications such as routing, planing, cutting, and sanding.
  • EASY TO USE: Simply insert into your workbench and place material flush against the dogs for a secure hold on your project.
  • Used on tables as a stop for pieces of wood so you can plop the wood onto your workbench with a plane or other tool without the wood dangerously sliding or moving.
  • BUILT TO LAST: Constructed from black plastic for longevity and rust-resistance.
  • Unlike metal bench dogs, these plastic ones will not mar your woodworking stock.
  • If you accidentally hit these with your prized chisel or plane, you will be glad that they are plastic.
Check Stock

No. 60-1/2 Adjustable Mouth Low Angle Block Plane

  • ■ Ideal for general smoothing and straightening of all projects..
  • ■ 9-1/4 Inch bench plane with a 2-inch cutter.
  • ■ Cast Iron Steel Body - Carbon Steel Blade.
  • ■ For those just starting out in woodworking. for DIY and for site work, this KSEIBI Smoothing Plane perfect tool makes your job Done!.
  • ■ KSEIBI products is backed by our 100% MONEY BACK GUARANTEE, satisfaction assured, no questions asked full refund policy, return for a full refund is not delighted with your purchase..
Check Stock

Bundle Taytools 468631 Pack of 4 Each 3/4 x 2-1/4 Inches Bench Dogs Hold Downs for Workbenches, Anodized Aluminum, Side Springs

  • Bench dogs are an essential hold down device that should be a part of any workbench. Bench dogs will greatly improve the function of any bench. They allow securing work to the edge or top of your bench by using 3/4 inch holes. Install wherever you want simply by drilling a ¾” diameter hole..
  • Come in packs of 4 each. Overall length is 2-1/4 inches..
  • These dogs are just under 3/4 inch by 0.015 inches so they won’t bind in the hole, yet the side spring holds them in place at any desired height..
  • Made from anodized aluminum that will not corrode or ruin a cutting iron or plane is accidently struck..
  • The dog faces have cross hatching and a 2 degree inward slop to better grab and hold your wood tight to the bench..
Check Stock

STANLEY Hand Planer, No.4, Adjustable, 2-Inch Cutter (12-404)

  • The hand planer for woodworking has a cast-iron base with precision-ground sides and bottom.
  • The wood plane has an epoxy coating for durability and long life.
  • The bench plane comes with a hardened, tempered steel cutter edge for durability.
  • Cutter manually adjusts for precise control of depth and alignment.
  • Quick-release cam-lock for easy removal of iron.
  • High-impact polymer handles and knobs are contoured and polished for comfortable hold.
Check Stock

Woodworking Planing Stop Bench Dogs Clamp Workbench Table Accessories 3/4 inch 19mm Dog Hole

  • A perfect holding solution when hand planing thin or wide stock, allows planing of boards as thin as 7mm, Prevents the workpiece from skewing under....
  • Fits standard 3/4 inch (19mm) diameter Bench Dog hole.
  • Use two bench dogs for wide boards or cross-grain work.
  • The stop can slide on the board, fits all kinds table surface.
  • Made of aluminum alloy, durable to use,not damage to the surface of the workpiece,not ruin plane in accidentally.
Check Stock

Japanese hand plane with replaceable blue paper steel blade

  • [Japanese Plane KANNA for Professional Carpenter and Woodworker] This is a Japanese professional carpentry tool used with pulling force. This moderately large size is useful for finishing a large surface like a bench plane for benchwork..
  • [Razor Sharp Japanese AOGAMI Steel Balde] Made of Yasuki Aogami Blue Paper Steel No.2, the highest quality Japanese carbon steel which is also used for Professional Japanese Kitchen Knives. It is characterized by its durability and outstanding sharpness. The heavy duty blade can be used for both soft and hardwood..
  • [Quality White Oak Body] The body (DAI) is made of carefully selected Japanese quality white oak. Japanese professional craftsmen carefully finished each piece. The natural wooden feel fits your hand..
  • [Made in JAPAN Japanese Craftsmanship Hand Tool] Professional Japanese blacksmiths and wood craftsmen carefully manufactured each plane one by one in Sanjo, Japan's leading cutlery town. You can enjoy authentic Japanese quality tool for a lifetime..
  • [Product Specification] Product Size: 2.8" x 10.1" x 2.7" | Blade Width:2.28" (58 mm) | Cutting Width: 1.96" (50 mm) | Weight: 30.6 oz | Blade Material: Japanese Carbon Steel (Yasuki Aogami Blue Paper Steel #2) | Body Material: Japanese White Oak | Instruction: Engl....
Check Stock

TREND DWS/KIT/B Diamond Whetstone Honing and Polishing Kit for Sharpening Router Bits and Chisels

  • MONOCRYSTALLINE DIAMOND: Allows fast, clean stock removal as your sharpen your tools.
  • IDEAL USES: Perfect to hone plane irons, chisels, and TCT or HSS router bits.
  • CONTINUOUS DIAMOND: 1000 grit side prevents diamond and nickel lift, giving more effective anti-corrosion and prevents snagging on smaller tools.
  • HONING GUIDE: Ensures correct angle is maintained on chisels and plane irons when used with diamond whetstone.
  • INCLUDES: 2x3-inch diamond bench stone with 1000 and 300 grit.
  • Honing guide with precision brass roller and setting....
Check Stock

TREND DWS/KIT/E Complete Diamond Sharpening Kit, 15 x 15 x 1

  • EXTRA FINE TO EXTRA COARSE SURFACE: One sharpening stone with extra-fine 1000 grit (15 micron) and coarse 300 grit (50 micron).
  • One sharpening stone with 600 grit (25 micron) and extra coarse 180 grit (70 micron).
  • IDEAL SHARPENING FOR MANY TOOLS: Workshop bench stone perfect for up to 3-inch plane irons, knives and chisels.
  • 600 grit is ideal for removal of scratches left after flattening tools such as chisels and plane blades before fine honing and polishing.
  • LAPPING FLUID: Suitable for use with all quality diamond abrasive products.
  • Use instead of water to reduce the threat of rusting by 95%..
  • POLISHING COMPOUND: 6.4-ounce honing polishing compound to polish sharpened cutting edges to give a highly polished, sharp cutting edge.
  • KIT INCLUDES: Two double-sided sharpening stones leather strop, honing paste, lapping fluid, and cleaning block.
Check Stock