Reviews Bench Clamp Vise

Kreg KBC3-VISE Automaxx Clamp Vise 3 Inch

  • A multipurpose vise system that’s easy to install and use.
  • Includes one 3" (76mm) Bench Clamp, one anodized aluminum Clamp Vise Plate, two Bench Dogs, two Clamp Blocks, mounting hardware.
  • Mounts to work surfaces from 1" to 2" thick.
Check Stock

Wedge Guys Rubber Vise Clamp for Golf Club Repair Regripping Reshafting Refinishing Custom Refurbishment & Replacement – Snugly Protects All Golf Club Shafts, Wedges Irons Drivers Putters & More

  • The Rubber Vise Clamp by Wedge Guys is an essential tool for those looking to keep their golf clubs protected while repairing, reshafting, refinishing, refurbishing, replacing, or regripping golf clubs in a bench vise..
  • HOLDS FIRM – At Wedge Guys we believe a firm shaft is better! The side ribs on the rubber vise clamp increases friction in your vise with less pressure while the diamond channel locks your shaft in place, keeping your club shaft more firm and steady while you work..
  • PROTECTED – Work on your golf clubs without worry! The Wedge Guys rubber vise clamp will help protect your golf club shaft against marring and guard against breakage..
  • MULTI-USE – The Wedge Guys vise clamp is 3.5” long, Made in the USA, and great for a variety of applications for use with any golf clubs including wedges, irons, drivers, putters, and more..
  • **Although the rubber vise clamp is made of high-grade thick rubber, prevents slippage, and keeps your club tight and protected in the vise during repair, be sure not to overtighten**.
Check Stock

Sourcemall Mini Bench Vise Small Table Clamp Hobby Craft Repair Tool (Clamping Range: 0-1.2inch)

  • The mini bench vise is ideal for holding small parts in Jewelry, Hobby, Model making, Electronics, Home and Work-Bench, and etc..
  • Mini Vise body is made of Aluminum which is durable, Light weigh and it's a very portable tool..
  • This clamp is easy to use. Simply turn the bar on top to open and close the clamp onto a table surface and then turn the screw to securely clamp any small objects to work on..
  • Clamp down any wooden block for sanding, grinding, detail, drilling, carving, chiseling, and much more..
Check Stock

Mini Table Clamp, Small Bench Vice, New upgraded cast iron manufacturing Jewelers Hobby Clamps Craft Repair Tool Portable Work Bench Vise (mini)

  • √ Mini Vise body is made New upgraded cast iron manufacturing, strong and sturdy，a handy miniature Vise..
  • √ Mini Table Bench Vise Ideal for holding small parts in Jewelry, Hobby, Model making, Electronics, Home and Work-Bench..
  • √ Vise is durable, Light weight， and it a very portable tool..
  • √ Mini size and portable, handheld use. It can be installed at the edge of all kinds of desktop, Maximum fixed thickness 1.2"(30mm), quick and easy disassembly..
  • √ Swivel Lock Clamp For fixing small items, such as olives, walnuts, bodhi, small Indian stone and other small items, good fixed effects.Clamp down any wooden block for sanding,grinding,detail,drilling,carving,chiseling,and much more..
Check Stock

Work Bench Vise with 2 Packs Magnetic Vise Jaw Pads, Metal Table Vise with Swivel Base and Anvil, Heavy Duty Bench Vice for Home Workbench Woodworking Tool, 4.5 Inches, Blue

  • 4.5 Inches Bench Vise Set: the package includes 1 piece blue bench vise and 2 pieces of magnetic vise pads, ready to install and use, no need to spend time looking for the right accessories.
  • Proper Size: machinist bench vise measures approx. 4.5 inches wide, opening size is up to 4.5 inches, magnetic vise pads measure about 4.5 inches long, matching size for simple operation and use.
  • Multi Functional Uses: our small bench vises are suitable for small parts processing and watch repair, such as woodworking, metalworking, sawing woodworking, drilling and bonding auxiliary installation.
  • The magnetic vise pad features a non slip design on the back, which is magnetic and difficult to separate when using.
  • Convenient to Use: the swivel vise is a lightweight tool that requires very little effort to get the job done and can be easily secured to the workbench for more convenience in your daily work.
  • Sturdy and Firm: the vice clamp adopts aluminum alloy material, and the magnetic vise pad is made of silicone and magnet, featuring a smooth surface and clear detail texture, which can apply for a long term use.
Check Stock

VIKING Professional Golf Grip Tape 2\ x 10.5\ (15 Pieces)

  • PROTECTIVE:The golf vise clamp will help protect your golf shaft against marring and guard against breakage when repairing or regripping golf club in the bench vise..
  • HOLDS FIRM :The side ribs on the rubber vise clamp increases friction in your vise with less pressure while the diamond channel locks your shaft in place, keeping your club shaft more firm and steady while you work..
  • DURABLE USE:Made of high quality thick rubber for long time use,3 1/2" size,pefectly keep your golf clubs tight and prevent slipping..
  • MULTIPLE USE:Suits for variety size of golf clubs,such as drivers, wedges, irons, putters,and more..
  • SATISFACTION GUARANTEE: We’re pleased to be able to offer a 90-day 100% satisfaction guarantee with every purchase,no questions asked..
Check Stock

JUGREAT 2in1 Bench Vise Home Table Vise Clamp-On Vise 360 Degrees Aluminum Alloy Swivel Rotating Universal Clamp for Electric Drill Stent Grinder Tools Holder

  • 2 in 1 360°Swiveling Vise Clamp: Bench Vise and Drill/ Grinder Holder.
  • Ball joint for 360 degree rotating,enable to fixed to various angles you want without remove process..
  • Cast-aluminum material used to withstand high torque and pressure,meanwhile the whole machine is lightweight and portable..
  • Easy to be fixed on table,worktop,countertop,workbench.
  • Suitable for handwork, woodworking, sculpting，modeling, workshop, simple repairs,etc..
  • Max Opening: 2" (50mm), Vise clamp fits any bench/desk up to 2"(50mm) thick, Approximately Width of Jaw: 3" (75mm), Driller holder size 1.5”-1.6”....
Check Stock

HFS R Parrot Vise Multi-Angle Vise 3.5

  • [MULTIFUNCTION]: This is a Multi-Angle Bench Vise..
  • [ANY ANGLE]: When the jaw is tightened, the vise rotates throughout 360 degrees and then locks at any angle..
  • [POSITION OF CLAMPING]: It is able to clamp in both upright and horizontal positions..
  • [PRECISION]: The casting process and machining is precise..
  • [INCLUDED COMPONENTS]: Parrot VISE Multi-Angle Vise 3.5..
Check Stock

FRICTIONWORKS Vise Jaws. Made In USA Pro Grade SH80 Hard Non-Scratch Polymer. 4 Inch Magnetic Bench Vise Covers. N48 Magnets. Fits 3 4 5 Inch Vises and Blocks

  • MADE IN USA – The bench vise jaw re-imagined from the ground up and built to a higher standard in the USA. New design innovations unique to Frictionworks non-marring soft jaws and a limited lifetime warranty..
  • SUPERIOR HOLD – 8 N48 spec Neodymium rare earth magnets force rated at 7 lbs each. We have tried other vice jaws and by far the strongest magnetic vise jaw pull force is with Frictionworks vise soft jaws. The only vice jaw covers with listed specs and the magnet strength you need to keep the protective jaws solidly on your table vise, jaw horse, drill press vise, swivel vise, vise clamps, or heavy duty bench vise..
  • EXCLUSIVE MAGNET RETENTION SYSTEM – The innovative internal bracket system in our soft jaws secures the magnets to the vise jaw caps with a stainless bolt and is then overmolded into the vice jaw pads, solving the biggest failure point of all soft jaw pads for metal vises leading to the toughest vise jaws made..
  • ENHANCED MATERIAL – Our proprietary fiber-reinforced polymer composite, shore hardness 80-D, provides an incredibly tough jaw face and works great and is recommended if you really want to clamp down hard. Use for gunsmithing, woodworking, jewelry working, , muzzle device installation, 80/20 Extrusions, plumbing, maching,....
Check Stock

Fashionclubs Mini Table Vice Craft Bench Vise Work Bench Clamp Swivel Vice Hobby Craft Repair Tool

  • A handy miniature Vise, ideal for holding small parts in Jewelry, Hobby, Model making, Electronics, Home and Work-Bench many more applications.
  • This mini table vise is made of a heavy duty aluminum alloy that is not only lightweight, but incredibly durable.
  • Clamp down any wooden block for sanding, grinding, detail, drilling, carving, chiseling, and much more.
  • This vise is incredibly easy to use for anyone. Simply turn the bar on top to open and close the clamp onto a table surface and then turn the screw to securely clamp any small objects to work on.
Check Stock

Forward CR40A-4.5In Bench Vise 210 Degrees Swivel Base Heavy Duty with Anvil 4 1/2

  • Jaw width:114.3mm(4.5"), Opening: 127mm(5"), Throat Depth: 66mm(2.6"), Clamping Force: 6613lb(3000kg).
  • More Durable and Sturdy: Material updated, all made from high strength ductile iron, PSI 60,000, bench vise can withstand a tough environment.
  • Multifunctional: Mounting vise on the workbench, then you could do the work of grinding, cutting, etc. Tapping work can also be done on the anvil of the bench vise. Pipe jaw can clamp the round workpiece.
  • More flexible: with 210 degree rotating base, large anvil and corrosion resistant handle.
  • Perfect Dual-Purpose Vises: This 4.5" vise is suitable for both industrial and DIY home use.
Check Stock

DEMON UNITED Muzzle Ski Vise -3 Vise Pcs- Quality Metal Construction- with Shop Apron & Ski Brake Retainers Combo Pack

  • Demon United Muzzle Ski Vise -3 Vise Pcs- with Shop Apron & Ski Brake Retainers Combo Pack.
  • The Demon Muzzle is a Shop quality Ski and Snowboard Tuning Vise 3 pcs set made from Cast Aluminum. Lightweight, Heavy- Duty and built to last!.
  • ADJUSTABLE : The Clamp ends that attached a bench open 2.5 Inches. Each end part can adjust up to 30 degrees in either direction offering a wide....
  • QUALITY: Each clamp end has grippy rubber feet that easily secure your ski or snowboard. The hardware is hardend steel and can really grip! Backed by....
  • COMBO: This product comes with the Demon Muzzle VISE (3 PCS), Demon Shop Apron (Keep those clothes clean:)) and 2 Ski Brake Rubber Retainers..
Check Stock

noevsbig rework station and 4 arms helping hands

  • Better quality hot air gun: The handle housing is made of flame retardant material with high flame resistance, and a built-in temperature protector which helps to automatically cut off power when overheating occurs or the fans stop running due to the damage. safer! (offer heat gun replacement for logistic damaged).
  • won't tip-off: This soldering helping hands base is a clamp on type to bench or tabletop, features soft rubber clamp pad providing more tighter slipping-free position, does not occupy your extra tabletop or bench space. Fits any bench up to 2.75 inches thick..
  • Helping Hands Soldering Third Hand Tools,NOEVSBIG 4 Arms with Adjustable Vise Tabletop Clamp Base for Electronics Repair Assembly Painting Jewelry DIY Arts Craft Hobby.
Check Stock