Reviews Bellow seal Gate Valve

National 222820 Oil Seal

  • PSS Shaft Seal bellow maintenance kit for world market leading dripless mechanical face seal..
  • Includes rubber bellow (1), O-rings (2), set screws (5), thread lock tube (1), hose clamps (4), Allen key (1)..
  • Preventative maintenance recommendation based on replacement standards for rubber products below waterline..
  • Certified by ABS, BV (or Bureau Veritas), RINA, and US Coast Guard approved..
Check Stock

Replacement Front Load Washer Boot, for Whirlpool, Kenmore, 8182119

  • Whirlpool Kenmore Washer Bellow part # 8182119, AH897030, PS897030, WPW8182119.
  • Drop-In Replacement. Exact same Fit & Function.
  • Our product is packed in large sturdy box (16″x16″x5″) so the bellow sits flat in the box, ready for installation. All other sellers (Seal Pro, ERP & even Whirlpool) pack in smaller boxes therefore the bellow is twisted and deformed when you receive it.
Check Stock

Camco Portable Travel Toilet | Features Bellow-Type Flush and Sealing Slide Valve to Lock-in Odors 2.6 Gallon (41531),Gray/Beige

  • Portable Travel Toilet: Provides a convenient bathroom spot while on-the-go.
  • Ideal for camping, RVing, boating, road trips and other recreational activities.
  • Detachable Holding Tank: 2.6-gallon holding tank is detachable for easy emptying.
  • Stops Leaks and Odors: The locking lid helps stop spills and the sealing slide valve locks in odors/protects against leakage.
  • Side latches fasten the tank to the toilet.
  • Easy to Flush: An easy-to-use bellow-type flush and pull slide valve provide simple flushing.
  • Size: Measures 12 3/8-inches (H) x 14-inches (W) x 16 ¼-inches (D).
  • Durable Construction: Made of durable, lightweight polyethylene.
  • Includes: (1) portable toilet and (3) individual TST Orange Drop-INs.
Check Stock

Valterra 7210 ABS Gate Valve, Black, 2\ FPT x Spig

  • [ 304 Stainless Steel Material ] Our gate valve is made of high quality 304 stainless steel material, this gate valve is sturdy and durable..
  • [ Straight Style ] The internal fluid path of valve body is straight through which allows fluid to flow in a straight line and the flow resistance is small..
  • [ Easy to Use ] It's easy to open and close, because the movement direction of the gate is perpendicular to the flow direction, whether on or off..
  • [ Widely Used ] Suitable for water, oil, gas, steam, mechanical equipment, chemical equipment, industrial equipment, water supply and drainage equipment, pharmaceutical equipment, petrochemical equipment, etc..
  • [ What You Will Get ] Yosoo Gate Valve, Yosoo worry free guarantee and friendly customer service.
Check Stock

Enhon 2 Set Tub Spout Diverter Repair Kit, Includes 2 x Diverter Valve Stems, 2 x Cup Seals and 2 x Gates, Bathroom Shower Bathtub Leaky Faucet Repair Replacement Parts Replace

  • ...take our shower tub spout diverter gate and place the cap seal into the spout gate.
  • Third, put the bath diverter gate with the rubber washer into the tub spout.
  • Last, place the lift rod into original place.
  • Package Includes: the tub spout diverter kit includes 2 x diverter valve stems, 2 x diverter gates and 2 x diverter cup seals totally.
  • When you pull on the diverter knob that is supposed to stop the water from flowing on the top spout and instead divert the water flow up to and the shower head.
Check Stock

NORJIN 1-2.5 inches Gate Valve Lockout Device with Safety Padlock, Water Spigot Lock Oil Gas Valve Lock Natural Gas Valve, Red

  • ☑【Gate Valve Lockout Set】 1pcs red gate valve locks and 1pcs padlocks. Suitable for outdoor faucet or electrical locking applications to help prevent the valve from opening during maintenance and repair..
  • ☑【Compatible With】Gate valve locking device and padlock set is suitable for gate valve handles from 1" to 2-1/2" (25mm-64mm) in diameter, with stem diameter up to 3/4 inch..
  • ☑【High Quality Material】 The lockout device is made of polypropylene material, strong and durable, high temperature resistant, impact resistant, and meets OSHA's lockout standard and designed for safety standards..
  • ☑【Wide Application】 Valve locks are commonly used for hose bib, gas, propane and water valves, plus forklift gas valves. Easy to use, suitable for professional and industrial use (not recommended for home use)..
  • ☑【Excellent Service】 If you have any questions or concerns, please feel free to contact us. It is our policy to render the best service to our customers..
Check Stock

Valterra 7301 ABS Gate Valve, Black, 3\ Slip

  • APPLICATIONS: Ideal for low pressure and vacuum applications as a quick shut-off valve - Can be used with air or clean, gray or waste water - See description for specific applications.
  • KEY FEATURES: Unrestricted flow - Full port - 304 Stainless Steel shaft/paddle and handle.
  • SPECIFICATIONS: Maximum Pressure 6psi Open/10psi Closed - PVC with female Slip/Hub fittings which receive 6" PVC pipe.
  • REPAIRS: Bolted assembly allows for replacement of valve body and gate seals - Handle can be replaced by removing C-clip.
Check Stock

Outdoor Faucet Locking System - Insulated Garden Hose Bibb and casing Lock and Cover - Saves Water, Prevents Unauthorized use and Vandalism, and is Easy to Install

  • Gate valve lock, 5 inches to 6.6 inches, recycled plastics, outdoor and domestic outdoor faucets, holiday homes, rental properties, office buildings, parks, schools, restaurants, etc..
  • A hollow circular shell surrounds the gate valve handle and is used in conjunction with a padlock to help prevent the gate valve from opening during the opening process, maintenance and repair.
  • Can accommodate padlock shackles with a maximum outer diameter of 175mm / 6.89in.
  • One lock hole can require multiple authorizations to operate the locked gate valve.
  • Suitable for 2.36 "-6.89" diameter stems, stem / shell, recycled polycarbonate is non-conductive and impact resistant, red, high visibility.
Check Stock

Spears P106 Series PVC DWV Pipe Fitting, Cleanout Plug, 8' NPT Male

  • APPLICATIONS: Ideal for low pressure and vacuum applications as a quick shut-off valve - Can be used with air or clean, gray or waste water - See description for specific applications.
  • KEY FEATURES: Unrestricted flow - Full port - 304 Stainless Steel shaft/paddle and handle.
  • SPECIFICATIONS: Maximum Pressure 6psi Open/10psi Closed - PVC with female Slip/Hub fittings which receive 8" PVC pipe.
  • REPAIRS: Bolted assembly allows for replacement of valve body and gate seals - Handle can be replaced by removing C-clip.
Check Stock

4 Sets Water Spigot Lock, Gate Valve Lockout Device with Safety Padlock,1-2.5" Diameter Valve Handles Faucet Locks Outdoor for Gas Water Spigot Petroleum

  • ...with 4 pieces of outdoor faucet locks, and 4 pieces of red combination locks.
  • They are designed in red color, highly visible and eye catching, preventing others from using water pipes without permission, and don't worry about the water being stolen.
  • Suitable Size: our gate valve lockout device is suitable for gate valve handle with a diameter of 1 to 2-1/2 inch (25 mm to 64 mm), and compatible with padlock shackles up to 0.39 inch outside diameter.
  • Please check the size information carefully before purchasing.
  • Security Design: the outdoor faucet handle lock features a hollow circular housing for surrounding the gate valve handle, combined with a combination lock, to help prevent the valve from opening during maintenance and repair.
  • Durable material: the gate valve lock is made of ABS, impact resistant and can withstand rough and harsh weather without breaking, temperature range from minus 46 degrees Celsius to 183 degrees Celsius (minus 115 degrees Fahrenheit to 361 degrees Fahrenheit).
  • The padlock combination red is made of zinc alloy, which is waterproof and rustproof, and you can set safe codes conveniently with the four....
Check Stock

Valterra 10" PVC Gate Valve - Slip Hub Fittings with Stainless Steel Paddle

  • APPLICATIONS: Ideal for low pressure and vacuum applications as a quick shut-off valve - Can be used with air or clean, gray or waste water - See description for specific applications.
  • KEY FEATURES: Unrestricted flow - Full port - 304 Stainless Steel shaft/paddle and handle.
  • SPECIFICATIONS: Maximum Pressure 6psi Open/8psi Closed - PVC with female Slip/Hub fittings which receive 10" PVC pipe.
  • REPAIRS: Bolted assembly allows for replacement of valve body and gate seals - Handle can be replaced by removing C-clip.
Check Stock

15x Heavy Duty Lockout Hasps 1.5inch Tagout Kit Safty Clamp Red

  • 【Save Water Bill】Are you worried about someone accessing your water without authorization? Well, Gate Valve Lock to solve your problem. The hollow circular housing fits perfectly over the handle of the faucet, insert a padlock and lock it, no more stealing water! And prevent others from using my water pipe.（Please confirm the size of the faucet and the product before purchasing to ensure that the product fits your faucet perfectly.).
  • 【Well Built】Our valve locks are made of ABS, an engineering material that is impact resistant and can withstand rough and harsh environments without cracking. When locked, the device is enclosed in the valve handwheel and can rotate freely to prevent the handwheel from opening accidentally..
  • 【Reliable Fit】Suitable for 1 to 2-1/2 inch diameter gate valve handle with up to 3/4 Inch Diameter Stems, can accommodate padlock shackle with max 3/8 inch outside diameter..
  • 【Bright and easy to follow】1 set of 2 red gate valve locks. Highly visible and eye-catching, no longer worry about being stolen water. (Note: locks and keys are not included, please purchase your own if needed.).
  • 【Application】It is suitable for outdoor faucets and used in combination with padlocks to help protect against valve opening during ma....
Check Stock

Valterra 6201 PVC Gate Valve, White, 2\ Slip

  • APPLICATIONS: Ideal for quick opening and shut off in low vacuum or pressure applications - Can be used with air or clean/gray/waste water.
  • KEY FEATURES: Unrestricted flow - Full port opening - Simple push/pull operation.
  • SPECIFICATIONS: Maximum Pressure - 20 psi Open/40 psi Closed, Schedule 40 PVC Slip fittings.
  • REPAIRS: Bolted assembly allows for replacement of valve body and gate seals - Handle simply unscrews.
Check Stock