Reviews Beer Keg Coupler

Keg Coupler, Beer Keg Coupler, D Sankey, Sankey D, Sankey D Coupler Stainless Probe & Body, Keg Couplers With Black Handle & Hose Clamp

  • ★ Stainless Steel Body ★ The Keg Coupler’s Body is made of 304 stainless steel that will not wear away over time and it will not chip like a chrome keg couple. It can improve durability and resistance to chemicals..
  • ★ Stainless Steel Probe ★ The Stainless Steel Keg Coupler’s Probe is made of stainless steel that for maximum durability and sanitation, for the ultimate in purity excellent for beer, wine, and cider..
  • ★ Tap For American Kegs Or Sankey Keg ★ The beer keg coupler is D – System keg taps. It fits perfectly into american kegs/sankey keg. Great sankey d coupler to replace old tap that was leaking and hard to get on..
  • ★ Come With Two Tailpiece Set & Hose Clamp ★ The sankey keg coupler is G5/8 thread( U.S. Beer Industry Standard). This d coupler has a 3/8″ OD gas/beer tailpiece to fit 5/16″ ID hose..
  • ★ With A Pressure Relief Valve ★ This keg coupler features a 55 PSI pressure relief valve with a food grade silicone O-ring to avoid relief valve leakage of the Keg coupler..
Check Stock

Tapcooler Beer Valve Connector for Direct Keg Connection

  • DURABLE MATERIAL : 304 stainless steel construction makes the keg coupler more durable and sanitary. stainless will keep the best taste of your beverage, the healthy drinking is "on-the-go" !!.
  • NO LEAKS: Thoughtful 5/16" gas in barb & 3/16"' liquid out barb setting, allows air and beer line connection end closely to attach to coupler, Also comes with hose clamps and extra connection sealing tape to tighten hose and seal the barb further avoiding any possibility of leaking. Features fully integrated 55-PSI pressure relief valve as well as a ball check valve which prevents back flow of beer and can be easily removed for cleaning..
  • EFFORTLESS INSTALLATION: This coupler is easy to operate, you just need to simply push down and turn to properly couple the keg. Compared to handle-type low profile coupler, this low profile coupler avoids the space of operation handle and is designed with a 90° hose barb allowing one hand control in tight dispensing locations, allows more consistent pours & less foaming of your beverage dispensing..
  • SPACE SAVING: Low profile D system coupler features a space saving....
Check Stock

Kegco MPK199B-G Guinness Dispensing Kegerator with Black Cabinet and Door

  • ...MPLETE GUINNESS KEG TAPPING KIT: This Kegerator is equipped with a complete direct draw kit for U system domestic kegs, which includes brands like Harp and Kilkenny in addition to Guinness. The kit includes a brand new 15 cu. ft. aluminum Nitrogen tank, a double gauge Nitrogen regulator, a U system lever handle keg coupler, and a 3" diameter polished stainless steel draft tower with a chrome plated stout beer faucet..
  • CHROME PLATED STOUT BEER FAUCET: To allow you to properly pour a glass of Guinness with that famous and unique head, we've included a specialty European Stout Beer Faucet with the dispense kit. This faucet operates by pulling forward and down on the tap handle. A restricted spout with a tiny restrictor disc helps slow down the pour and allows the beer to pour properly, and the disc can be removed if you need to pour a regular beer from the faucet..
  • "U" SYSTEM LEVER HANDLE KEG COUPLER: This kit comes with a commercial grade lever handle keg coupler that is compatible with all U system kegs, including Guinness, Harp, and Kilkenny kegs. It features a 55-psi pressure relief valve and a nickel-plated forged brass body. To tap a keg all you have to do is squeeze the handles together and then push down on the lever handle to properly couple the ....
Check Stock

Keg Coupler, MRbrew Beer Coupler, Keg Coupler D System, Sankey Keg Coupler, All 304 Stainless Steel Keg Tap Coupler, For American Standard 5/16'' I.D Size Liquid & Gas Hose

  • STAINLESS STEEL PROBE: The keg coupler d system probe, which is the part that actually presses down into the keg to allow beer to pass through the coupler, is made of high quality 304 food grade stainless steel. It is resistant to chemicals, making it more sanitary than chrome plated brass..
  • STAINLESS STEEL BODY: This premium sankey keg coupler body also constructed of durable 304 grade stainless steel so it can stand up to the toughest conditions of a commercial bar. Without any plating, it will never rust and produce harmful substances. making it more safer and more durable than chrome plated brass..
  • STAINLESS STEEL SAFETY RELIEF: This beer coupler features a 55-PSI pressure relief valve allowing you to easily let the pressure out of the keg. With a food grade silicone O-ring to avoid relief valve leakage. The d coupler meeting all kinds of pressure that needs you, this is definitely the best gift for lovers of home brewing..
  • STAINLESS STEEL ERGONOMIC HANDLE: The MRbrew keg coupler has an easy to use ergonomic handle. To tap a keg all you have to do is pull out and then down on the lever handle to properly couple the keg. Anyone who has pulled the handle off of a keg coupler can appreciate the convenience!.
  • 100% LIFELONG IUUSES SOLVING FOR YOU: Eac....
Check Stock

BACOENG A Tap Kegerator Door Refrigerator Conversion Kit No Tank

  • ...s 2 rubber protective covers. It always tell you working pressure and tank pressure with pinpoint accuracy. A convenient knob style pressure dial that can be adjusted without tools. Shutoff valve with built in spring loaded check valve to prevent beer from flowing backward into the gas lines..
  • 2. HANDLE D-SYSTEM KEG COUPLER: D-System Keg Coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use - simply grip the handle and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
  • 3. CHROME BEER FAUCET WITH BRASS LEVER: Featuring a forged brass body and highly polished chrome finish, this beer faucet puts a stylish finishing touch on your kegerator at a price you'll love.The brass shaft assembly and lever includes a non-stick ball washer for smooth operation, and the lever has standard threading that is compatible with most branded tap handles. This 4-1/8" long beer shank with nipple assembly is constructed from chrome-plated brass and can be mounted through a 1" hole..
Check Stock

Tower Kegerator Conversion Kits Mini Refrigerator Conversion Kit Include Adjustable Beer Faucet Beer Regulator Beer Gas Line D Keg Coupler for Draft Beer Dispensing Equipment by PERA

  • The Sankey Keg Coupler is made of chrome-plasted brass body and stainless steel proble, can retain the beer flavor after long-term use. The beer keg coupler can fit all American D Type Keg, Perfect for dispensing beer, wine, soda and other carbonated drinks..
  • The Tap Tower Kegerator Conversion Kits includes most Convert kits you need to easily conert a refrigerator or freezer into your very own draft beer dispenser. Include Beer Tap, Beer gas regulator, beer gas line, D keg Tap, beer wrench etc..
  • This DIY Kegerator Conversion kit comes with almost everything you need to serve your favorite beverages, just connect the kegs and CO2 tank..
  • It is save your money and space by building your draft beer dispenser system using your refrigerator and PERA kegerator conversion kits..
  • Quality Guarantee, Any Problem for the kegerator conversion kit , Please contact us, Money Back or Replacement Guarantee..
Check Stock

Kegco Beer Keg Coupler D System Tap Lever Handle

  • Kegco keg coupler features a commercial-grade construction that stands up to heavy use in demanding commercial environments like pubs, bars, and restaurants.
  • Specially designed with a lever handle that makes it more sturdy and reliable than standard wing handle style keg couplers.
  • NSF approved keg coupler features a durable nickel-plated forged brass body with a sanitary stainless steel probe.
  • This keg tap is compatible with all American “D” system sankey kegs and will be able to tap domestic brand beer kegs.
  • Keg coupler design includes a 55-psi pressure relief valve that allows over-pressurized gas to escape before it enters the keg.
Check Stock

Single Tap Ultimate Door Mount Kegerator Conversion Kit

  • ... environments, and has been durably constructed for a consistent flow pour after pour. It features a T-Style adjustment valve that makes it easy to adjust the pressure in the keg, and dual gauges indicate both how much CO2 pressure is inside of the keg and how much CO2 gas is left in the cylinder..
  • LEVER HANDLE KEG COUPLER: This NSF-approved Kegco KT85D-L “D” System Coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use – simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
  • DOOR MOUNT STAINLESS STEEL DRIP TRAY: Our 6″ x 4″ door mount drip tray’s clean design, durable stainless steel construction, and attractive brushed finish have made it a favorite of beer lovers. Hassle-free from start to finish, this drip tray can be quickly and easily mounted using the two screw holes in the backsplash, and when you’re done dispensing for the day, a removable grill makes clean-up a breeze. This drip tray does not have a....
Check Stock

BACOENG Standard Tower Kegerator No Tank Beer Conversion Kit

  • ...tput pressure, while the side gauge tells you what's left in the Co2 tank, so you don't run out of gas during a party. The Standard plated brass body has a large pressure adjustment knob for easy use and includes a manual pressure release valve..
  • LEVER HANDLE KEG COUPLER: This NSF-approved Kegco KT85D-L D System Keg Coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use - simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
  • SINGLE FAUCET DRAFT BEER TOWER: Featuring a beautiful Standard-plated metal finish and a matching Standard-plated faucet with metal lever, this 3" diameter air-cooled Kegco D4743T draft beer tower is the same stylish tower used on most commercial grade kegerators. This tower conveniently includes 5 feet of clear beer tubing ending in a nozzle and hex nut assembly for quick connection to all standard keg couplers, as well as a gas....
Check Stock

Kegco Standard Tower Kegerator Conversion Kit no Tank - STCK-NT

  • ...remium features! The top gauge indicates output pressure, while the side gauge tells you what’s left in the Co2 tank, so you don’t run out of gas during a party. The chrome plated brass body has a large pressure adjustment knob for easy use and includes a manual pressure release valve..
  • LEVER HANDLE KEG COUPLER: This NSF-approved Kegco KT85D-L D System Keg Coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use – simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
  • SINGLE FAUCET DRAFT BEER TOWER: Featuring a beautiful chrome-plated metal finish and a matching chrome-plated faucet with metal lever, this 3″ diameter air-cooled Kegco D4743T draft beer tower is the same stylish tower used on most commercial grade kegerators. This tower conveniently includes 5 feet of clear beer tubing ending in a nozzle and hex nut assembly for quick connection to all standard keg couplers, as well as a gasket and for screws for easy mounting..
Check Stock

Stainless Steel keg Coupler Ball Lock Posts Adapter,Sankey keg to Ball Lock Quick Disconnect post,Fits to D Type Keg Coupler FPT 5/8 Thread Stainless Steel Gas & Liquid Post for Homebew

  • 【Food Grade Material】Made of food grade 304 stainless steel instead of chrome plated , which let our keg coupler adapter kit more healthier/ environmental/anti-corrosion/no rust/durable. 2pcs Silicone gaskets are for free..
  • 【Two Way to Identify Gas &Liquid Post】 The Gas Post has a subtle etched line around the top of the base (the liquid post has no etched line).The flaring of the metal on the liquid side is much wider than the gas side.
  • 【Quick & Easy To Convert】This Keg Coupler Adapter can combined with ball lock quick disconnect set that will convert the sanke style keg into a Cornelius style Ball Lock keg( easy to toggle between commercial and homebrew beers).
  • 【Hand Or Plier To Install】Can install our ball lock keg conversion kit in 5/8 thread S-style &D-style keg coupler to use.You can use hand or the plier to lock each side grooves,then tighten the posts. Don’t over tighten to avoid deforming the washer.
  • 【Easy To Clean 】To clean this keg coupler adapter kit , you can infuse the clear water into your beer keg to operate one time just like exporting beer.Don’t suggest you take apart this conversion kit,cuz it is very difficult to reinstallation.
Check Stock

Non-Slip Rubber Padded Stainless Steel Drip Tray with Tower Cutout by Proper Pour

  • Kegco keg coupler features a commercial-grade construction that stands up to heavy use in demanding commercial environments like pubs, bars, and....
  • Specially designed with a lever handle that makes it more sturdy and reliable than standard wing handle style keg couplers.
  • NSF approved keg coupler features a durable nickel-plated forged brass body with a sanitary stainless steel probe.
  • This keg tap is compatible with all American "D" system sankey kegs and will be able to tap domestic brand beer kegs.
  • Keg coupler design includes a 55-psi pressure relief valve that allows over-pressurized gas to escape before it enters the keg.
Check Stock

Kegco HBK199S-2 Keg Dispenser

  • ...packed with premium features! The top gauge indicates output pressure, while the side gauge tells you what's left in the CO2 tank, so you don't run out of gas during a party. The chrome plated brass body has a large pressure adjustment knob for easy use and includes a manual pressure release valve..
  • LEVER HANDLE KEG COUPLER: This NSF-approved Kegco KT85D-L "D" System Keg Coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use - simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
  • CHROME BEER FAUCET WITH BRASS LEVER: Featuring a forged brass body and highly polished chrome finish, this NSF-approved Kegco CFBL beer faucet puts a stylish finishing touch on your kegerator at a price you'll love. The brass shaft assembly and lever includes a non-stick ball washer for smooth operation, and the lever has standard threading that is compatible with most branded tap handles..
  • STANDARD METAL BEER FAUCET WRENCH: This beer faucet spanner wrench is an essential tool....
Check Stock