Reviews Bed Rail Bracket

T Tulead Bed Rail Brackets Cold-Rolled Steel Bed Rail Fittings Bed Frame Connectors 3.3-Inch Bed Rail Hooks,with Screws

  • Package Content:2 x Left Bed Rail Bracket.
  • Total Size:84x33x27mm/3.3"x1.3"x1"(L*W*H).
  • Made of high quality cold-rolled steel,durable,sustainable use.
  • Suitable for bed rail,wooden bed frame,headboard,footboards,and other wooden furnitures.
  • Perfect for repairing your old or damaged bed frames.
Check Stock

Pack of 8 NUZAMAS Bed Brackets, Heavy Duty Bed Hinges, Connector for Bed Corner Fixings, Bed Frame Hardware Rail Bracket Fittings Fastener

  • Set of 8 NUZAMAS Bed Frame Brackets, Bed Rail Fittings, 4 right and 4 lefts, made of hardened metal, idea for timber beds of any size..
  • These bed rail fittings are designed to any building a timber bed or replacing the old brackets on an existing bed.
  • It is easy to use, simply screw the plate flush with the end of your side rail, then set the bracket at the desired height. When it is done, the plate will just slot into the bracket firmly and securely.
  • Comes with installation screws for your convenience.
  • 2.5mm extra thick for more strong support, fix your rickety bed in one go.
Check Stock

Bed Rail Bracket - Heavy Duty Non-Mortise Bed Rail Bracket Bed Rail Fasteners,Set of 4 Screws Included

  • Material: Made of heavy-duty galvanized steel, thicker steel plate has more load-bearing capacity, suitable for various sizes of beds or repairing old bed frames..
  • Dimensions: - Bed rail bracket: Corner: 3.3" X 1.02" X 1.3".
  • Thickness: 0.078" (2mm) - Mounting screws: Length: 20mm.
  • INSTALL AND DISASSEMBLY EASILY: no need to do mortise.Just Install directly, it is convenient.
  • Application: Widely used in wooden bed frames, bed rails, headboards, pedals, bunk beds, and even other wooden furniture..
Check Stock

Conversion Bracket Adapter Plate Kit Bed Frame to Headboard or Footboard Attachment #35 Down Hook Plates - Pack of 4

  • QUICK AND EASY CONVERSION INSTALL - from a bolt-on metal bed frame or bed rail for use with a hook-on or slotted type headboard or footboard..
  • HEAVY DUTY CONSTRUCTION - CAFORO brackets are made of 100% steel - these brackets are durable and meant to last a lifetime! Our adapter kit comes with 4 brackets (2 left & 2 right), hardware (8 nuts & 8 bolts)..
  • 2 HEIGHT ADJUSTMENT allows you to make up to a 2" adjustment in height. Vertical adjustment dimensions are based on the bracket bolts being approximately 2-1/2" apart. If a vertical adjustment within the specified range of 2" is needed, then the #35 conversion bracket is the right choice. APPROXIMATE DIMENSIONS: 6" H x 1 3/4" W x 1" D (Hook Depth).
  • SAVING YOU MONEY SOLUTION - Our 100% steel construction top quality down hook plates attach to a metal bed frame/rail so the headboard or footboard can support all or most of the weight of the bed. This is an inexpensive way or solution to keep your favorite, old, or antique Headboard. Using our #35 Bed Rail hook plates prevents you from having to buy either a new Bed Frame or a new Headboard/Footboard..
  • LIFETIME SERVICE POLICY. If you are not completely satisfied with your purchase for any reason, simply return it for a full refund - no questions asked..
Check Stock

Kings Brand Furniture - Adjustable Height Center Support Leg for Bed Frame (1)

  • Packing include:Bed Rail Brackets with Screws Set of 4.
  • Stainless Steel Flat Straight Brace Repair Fixing Bracket with Screws Set of 4.
  • Easy to use:There is no need to do mortise.It's very simple to Installation and removal.And also Easy to Use and Operate..
  • Widely Use:It's suitable for wooden bed frames, bed rails, headboards, footboards, bunk bed ladders,Bed Posts, Bunk Beds, even other wooden furniture.It's ideal of repair of existing wood frames..
  • High Quality:The Bed Rail Fittings are Made of heavy duty galvanized steel, sturdy and durable.
  • The Brackets Mending Plates are Made of Stainless Steel.They Comes with premium screws..
  • Enough For One Bed - No-Mortise Heavy Duty Rail Fittings Set of 4 (4 Brackets & 4 Plates) with enough mounting screws.They are universal in size and can fit any surface..
Check Stock

Socell 4 Sets Bed Rail Brackets Heavy Duty No-Mortise Bed Rail Fittings Wooden Bed Frame Connectors with Screws for Headboards Footboards Hold 500 pounds Maximum

  • ✿Dimensions: Bed rail brackets: Angle pieces: 85 x 30 x 27mm/3.34" X 1.18" X 1.06".
  • Flat pieces:96.6 x 28.5 x 10.8mm/ 3.8" X 1.12" X 0.42".
  • ✿Enough For One Bed - No-Mortise Heavy Duty Rail Fittings Set of 4 (4 Brackets & 4 Plates) with enough mounting screws..
  • ✿Bed rail fasteners are made of sturdy and heavy-duty colour galvanized rust-resistant steel, thickened steel plates that are more load-bearing, suitable for a variety of sizes of beds or for repairing old bed frames..
  • ✿Application:Be widely used for wooden bed frames, bed rails, headboards, footboards, bunk bed ladders, even other wooden furniture..
  • ✿Package included: 4 x Bed rail bracket.
Check Stock

Socell 4 Sets Bed Rail Brackets Heavy Duty No-Mortise Bed Rail Fittings Wooden Bed Frame Connectors with Screws for Headboards Footboards Hold

  • ✿Dimensions: Bed rail brackets: Angle pieces: 86 x 33 x 26.5mm/3.38"" X 1.3"" X 1.04"".
  • Flat pieces:91 x 31 x 6.5mm/ 3.58"" X 1.22"" X 0.25"".
  • ✿Enough For One Bed - No-Mortise Heavy Duty Rail Fittings Set of 4 (4 Brackets & 4 Plates) with enough mounting screws..
  • ✿Bed rail fasteners are made of sturdy and heavy-duty colour galvanized rust-resistant steel, thickened steel plates that are more load-bearing, suitable for a variety of sizes of beds or for repairing old bed frames..
  • ✿Application:Be widely used for wooden bed frames, bed rails, headboards, footboards, bunk bed ladders, even other wooden furniture..
  • ✿Package included: 4 x Bed rail bracket.
Check Stock

Shademax Stake Pocket Covers Custom Fit for 2015-2020 GMC Canyon/Chevy Colorado Truck Bed Rail Hole Plugs Stake Pocket Caps Cover Accessories (Set of 2)

  • ...vers more sturdy and not easy to break..
  • Practical Stake Pocket Plugs: The Colorado & Canyon bed rail hole plugs(2015-2020) will give your truck a OEM look.The truck bed rail hole plugs not only prevent rain, snow, dirt, dust, leaves and sand from dropping into the rail holes, but also protect the exposed metal bracket of the truck bed rail stake pockets from long-term weathering and aging..
  • Clean & Finished Look: Designed according to the original vehicle data, the extended edges of the stake pocket covers can make the bed rail hole cover perfectly fit the original hole. The Canyon stake pocket hole caps would not be flush with the holes, which allows you to easily remove them when you need to clean the bed rail holes..
  • Easy Installation: Clean and dry the trunk bed rail stake hole, and then just insert the stake pocket covers into the hole. No any tool or modification required.(Note:Package Included:Two covers in a set, one left Hole Plug Cover & one right Hole Plug Cover.).
Check Stock

Antrader No-Mortise Bed Rail Bracket Heavy Duty Fittings Complete 8 Sets Screws Included Enough for 2 Beds

  • Hook Plate Size: 90 x 15 x 21mm/ 3.54" x 0.59" x 0.83"(L*W*T).
  • Mounting Plate Size: 85 x 37 x 2.3mm/ 3.35" x 1.46" x 0.09"(L*W).
  • Package Content: 8 x Bed Rail Bracket, 8 x Plate (Enough for 2 Beds).
Check Stock

Draw-Tite Reese Elite™ Series Fifth Wheel Gooseneck Hitch

  • Utilizes the same vehicle specific under-bed rail kit system as the Elite fifth wheel.
  • Above-Bed Gooseneck can be easily removed for unobstructed use of the truck bed.
  • Built-in chain bracket to accommodate safety chain and Weather resistant plastic covering provides protection from the elements and aesthetic appeal.
Check Stock

FarBoat 4Sets Bed Hinges Bed Rail Brackets 3.1\ Double Hooks Heavy Duty Iron Replacement Part for Bed Frames Headboard Footboard with Screws(80mm/3.1inch)

  • Function: Universal wood bed claw hook plates are intended as a replacement for hook plates which have been damaged or for new bed construction where hook plate installation is desired. 5 Hole Design is fit for most American wooden headboard footboard frame..
  • Versatility: The wood bed rail Hooks Plates are designed for use with beds which utilize 2" On Center pin spacing. It is fit all sized bed frames, bed posts, Bed rails, footboards, headboards, King or Queen size beds..
  • Material: Wood bed rail bracket are made from durable, high-quality iron coated with zinc for rust and corrosion resistance.
  • Packing included: 4pcs Wood Bed Rail Hook Plates, 20pcs mounting screws, easy to install..
  • Dimensions: Thickness: 2mm, 3-1/4" Wide, 3-4/9" High, 2" hook separation..
Check Stock

Shademax Stake Pocket Covers Custom Fit for 2019 - 2023 GMC Sierra and Chevrolet Silverado Truck Bed Rail Hole Plugs Stake Pocket Caps Cover (Set of 2)

  • ...terproof and wearable ABS material. The edge is thickened to make the stake pocket covers more sturdy and not easy to break..
  • Practical Stake Pocket Plugs: The truck bed rail hole plugs not only prevent rain, snow, dirt, dust, leaves and sand from dropping into the rail holes, but also protect the exposed metal bracket from long-term weathering and aging..
  • Clean & Finished Look: Designed according to the original vehicle data, the extended edges of the stake pocket covers can make the bed rail hole cover perfectly fit the original hole. The stake pocket hole caps would not be flush with the holes, which allows you to easily remove them when you need to clean the bed rail holes..
  • Easy Installation: Clean and dry the trunk bed rail stake hole, and then just insert the stake pocket covers into the hole. No any tool or modification required..
Check Stock

woiron 4PCS Heavy Duty Wood Bed Rail Hook Plates for Headboard and Footboard Bed Rail Fitting Bracket with Mounting Screws Universal Hardware Claw Hook Plate for Wooden Frame

  • Function: Universal wood bed claw hook plates are intended as a replacement for hook plates which have been damaged or for new bed construction where hook plate installation is desired. 5 Hole Design is fit for most American wooden headboard footboard frame..
  • Versatility: The wood bed rail Hooks Plates are designed for use with beds which utilize 2" On Center pin spacing. It is fit all sized bed frames, bed posts, Bed rails, footboards, headboards, King or Queen size beds..
  • Material: Wood bed rail bracket are made from durable, high-quality iron coated with zinc for rust and corrosion resistance.
  • Packing included: 4pcs Wood Bed Rail Hook Plates, 20pcs mounting screws, easy to install..
  • Dimensions: Thickness: 2mm, 3-1/4" Wide, 3-4/9" High, 2" hook separation..
Check Stock