Independent Skateboard Hardware 1\ Phillips Black/Red 8 Nuts and Mounting Bolts
- Includes 8 axle washers and 4 axle nuts from Dimebag Hardware..
- Speed washers increase speed and promote longer bearing life by reducing friction between the bearing and axle nut and hangar..
- Having brand new lock nuts will keep your wheels from falling off. The more you replace your wheels and bearings, the more the axle nuts wear out and lose their ability to stay tight. These fresh new nuts will keep you locked up! Produced with top quality materials. The thread size for these axle nuts is 5/16"..
- This kit features products that are the standard size and will fit on all skateboard/longboard trucks that have 8mm axles (virtually every truck has the standard 8mm axle size)..
- The 4 locknuts and 8 washers included are enough to outfit 2 trucks..
Check StockLucid - Revenge Alpha II 175mm Longboard Carving Surf Skateboard Trucks - Sold as Set 2 Trucks
- Made up of iron, have enough durable and solid..
- Skateboard hardware set includes 8pcs speed washers, 4pcs bearing spacers, and 4pcs nuts.
- Used to improve skateboard stability and reduce wheel shake, keep bearings parallel, improve rotating speed and precisions, reduce bearing wear and....
- Speed washer is made of iron, used to increase speed and promote longer bearing life by reducing friction between the bearing and hangar..
- Relax the rubber ring treatmentS, safe and reliable. Screw nuts for truck repair or rebuild kit.
Check StockBearing Buddy 43102 Chrome Bearing Protector - 2.328\ Diameter, Pair
- Rugged, dependable wheel hub delivers smooth, trouble-free trailering.
- Galvanized, one-piece cast hub comes with pre-greased bearings, seals, dust caps, cotter pin, and lug nuts.
- Five UHI lugs, lug nuts on a 4 ½-inch bolt pattern, ½-inch-20 studs.
- Bearing, race, and seal codes: Inner Bearing Code: L44649.
Check StockSouthwest Wheel 5,200 lbs Trailer Axle Self Adjusting Electric Brake Kit
- Pair of TruRyde 12" x 2" 6-5.5" bolt circle hub and drums 25580 inner bearing 15123 outer bearing.
- Pair of TruRyde 12" x 2" self adjusting electric backing plates.
- Works with Al-Ko, Dexter, Lippert,and Quality Trailer Axles. TruRyde parts are manufactured to automotive standard in ISO/TS-16949 registered factory..
- Comes with TruRyde bearings, seals, lug nuts, grease caps, cotter pins, spindle washers, spindle nuts, and brake mounting washers and nuts.
- Built for 42 spindles with a 5 hole brake flange.
Check StockSouthwest Wheel 3,500 lbs Trailer Axle Self Adjusting Electric Brake Kit 5-4.5 Bolt Circle
- Pair of TruRyde 10" x 2 1/4" 5-4.5" bolt circle TruRyde hub and drums with parts (2 5/8" from center of one stud to the center of the next stud).
- Pair of TruRyde 10" x 2 1/4" self adjusting TruRyde electric backing plates.
- Works with Al-Ko, Dexter, Lippert,and Quality Trailer Axles.
- Comes with TruRyde bearings, seals, lug nuts, grease caps, cotter pins, spindle washers, spindle nuts, and brake mounting washers and nuts.
- Built for 84 spindles with a 4 hole brake flange (inner bearing L68149, outer bearing L44649).
Check StockKURUI Heavy Duty Hollow Wall Anchors for Drywall 24Pc Toggle Bolts and Wing Nut Kit Hollow Drywall Anchors and Screws Assortment Set 3 Sizes Butterfly Anchors 1/8in 3/16in 1/4in
- MULTIPLE SIZE OPTIONS – This drywall anchors and wing nut kit contains toggle bolts set in 3 different sizes – 1/8in, 3/16in, 1/4in for your choice according to your actual mounting and load bearing requirements..
- PREMIUM MATERIAL, EXCELLENT PERFORMANCE – The toggle bolts and nuts in each size are constructed with new high-strength steel, which ensures outstanding strength and hardness. Finished with multi-layer galvanization, these drywall anchors and nuts are rustproof and corrosion resistant..
- FOR HEAVY-DUTY HANGING TASKS – The drywall anchors are designed with spreading butterfly wing nuts, when knocked in hollow walls the wings will automatically spread to increase the area of the thrust surface, which enhances the load bearing of the toggle bolts for heavy-duty hanging tasks..
- WIDELY APPLICABLE – Our toggle bolts assortment kit with multiple size options allows you to easily hang items such as television, painting, mirror, shelves, pictures onto hollow walls safely and with ease..
- WHAT YOU GET – The package includes 12pcs 1/8in toggle bolts and nuts set, 6pcs 3/16in drywall anchors and nuts set, 4pcs 1/4in heavy-duty wall anchors, all the piece are well packaged in a beautiful clear plastic box. If you have any question about this toggl....
Check StockThe ROP Shop | 40 Inch Shaft Kit for Drift Trike Bikes includes (4) Bearing Flangettes PFT-206
- The ROP Shop replacement 40 Inch Shaft Kit for Drift Trike Bikes includes (4) Bearing Flangettes PFT-206.
- Specs - Shaft Size: 40". Chain Type: #420. Wheel Size: 11 x 6.00 x 5. Maximum Weight Limit: 330 lbs. Refer to images 2 & 3 for more information.
- Includes - (1) 40" Tubular Aluminum Shaft Axle, (2) Racing Slick Tires with Aluminum Wheels (11x6.00-5), (1) Sprocket (54T), (1) Sprocket Hub Adapter Plate, (1) Chain (#420), (2) Bearing Hangers, (4) Bearing Flangettes, (2) Aluminum Race Hubs with 1 1/4" Bore, (1) Clutch with 3/4" Bore (10T, #420), (2) Axle Bearings, (4) Lock Collars, (3) Key Stocks, (6) Axle Nuts, (6) Bolts, (6) Nuts & (2) Snap Rings.
- This kit is used for many Drift Trike Bikes.
- Please be sure to check your part or model number to ensure this is the correct shaft axle wheel kit for your unit. Also, please note this may replace multiple part numbers.
Check StockSouthwest Wheel R30484X 84 Spindle & 6-5.5\ Bolt Circle Trailer Hub
- Round R40842X 42 Spindle & 6-5.5" Bolt Circle Trailer Hub..
- 6 studs 5.5" Bolt circle using 25580 inner and 15123 outer bearing hub..
- Includes Hub, inner bearing, outer bearing, seal, grease cap & lug nuts..
- 42 Spindle, Spindle width =2" Spindle length=8" Overall length =13" Capacity (pair) 4,000 lbs..
Check StockELSOON Bearing Buddy Wheel Bearing Grease Bearing Buddy Caps Trailer Wheel Bearing Protectors Dust Covers - Grey and Chrome 1.98-Inch 1 Pair
- Hot-Dipped Galvanized Hub. This makes it excellent for boat trailers to protect against the harsh saltwater environment..
- Outer bearing 44643 -- 1 , Inner bearing 44643 -- 1.
- Seal inside diameter 1.25 and 1.5, Seal outer diameter 1.983.
- Package Including: Hub, Inner bearing, Outer bearing, Seal, Cotter pin, Lug Nuts and Dust Cap.
- 1 year warranty, support replace, return and refund service.
Check Stock#NA 1 inch Skateboard Hardware Bolts Bag Packing (Green)
- The package includes: you will get 16 skateboard truck nuts and 16 axle washers, enough to assemble 4 skateboards to meet your long-term needs.
- Perform well: the skateboard truck hardware keeps wheels and skateboard trucks tight, axle washers can reduce friction between the bearing and axle nut and hangar, thereby extending the life of the skateboard.
- Standard size: the skateboard truck axle washers set is suitable for every truck with standard 8 mm axle size, suitable for most skateboards and longboards.
- Quality materials: skateboard truck nuts and skateboard axle washers are made of quality metal, tough and wear-resistant, well-made, skateboard truck nuts have non-slip rubber rings to avoid falling offPlastic box included: these hardware skateboard truck nuts and axle washers are placed in a transparent plastic box, lightweight and compact in size, easy to carry and store.
- Plastic box included: these hardware skateboard truck nuts and axle washers are placed in a transparent plastic box, lightweight and compact in size, easy to carry and store.
Check StockSOUTHWEST WHEEL 5-Hole, 4.5\ Bolt Circle Idler Hub for 2,000 lb. Axles (BT8 Spindle) 1\ Spindle
- Round R30484X 84 Spindle & 6-5.5" Bolt Circle Trailer Hub..
- 6 studs 5.5" Bolt circle using L68149 inner and L44649 outer bearing hub..
- Includes Hub, inner bearing, outer bearing, seal, grease cap & lug nuts..
- 84 Spindle, Spindle width =1 3/4" Spindle length=4" Overall length =8 7/8" Capacity (pair) 3,000 lbs..
Check StockAlveyTech 11x7.10-5 PVC Plastic Tire Sleeve for Drift Trikes & Go-Karts
- The ROP Shop replacement 36 Inch Shaft Kit for Trike Drift Bikes includes (2) Go Kart Tires 11x6.00-5.
- Specs - Shaft Size: 36". Chain Type: #420. Wheel Size: 11 x 6.00 x 5. Maximum Weight Limit: 330 lbs. Refer to images 2 & 3 for more information.
- Includes - (1) 36" Tubular Aluminum Shaft Axle, (2) Racing Slick Tires with Aluminum Wheels (11x6.00-5), (1) Sprocket (54T), (1) Sprocket Hub Adapter Plate, (1) Chain (#420), (2) Bearing Hangers, (4) Bearing Flangettes, (2) Aluminum Race Hubs with 1 1/4" Bore, (1) Clutch with 3/4" Bore (10T, #420), (2) Axle Bearings, (4) Lock Collars, (3) Key Stocks, (6) Axle Nuts, (6) Bolts, (6) Nuts & (2) Snap Rings.
- This kit is used for many Drift Trike Bikes.
- Please be sure to check your part or model number to ensure this is the correct shaft axle wheel kit for your unit. Also, please note this may replace multiple part numbers.
Check StockRigid Hitch Trailer Hub Kit - for 1-3/8\ Inner / 1-1/16\ Outer Tapered Spindle - 5 Bolt on 4-1/2\ Bolt Circle
- Round R30484X 84 Spindle & 5-4.5" Bolt Circle Trailer Hub.
- 5 studs 4.5" Bolt circle using L68149 inner and L44649 outer bearing hub.
- Includes Hub, inner bearing, outer bearing, seal, grease cap & lug nuts.
- 84 Spindle, Spindle width =1 3/4" Spindle length=4" Overall length =8 7/8" Capacity (pair) 3,000 lbs.
Check Stock