Reviews Bearing Lm300849

30206 Tapered Roller Bearings, Single Row 30x62x17.25 mm Same Day Shipping

  • Tapered Roller Bearing Set (Cup and Cone).
  • Bearing ID: 1.25” (31.750mm) Cone Width: .6600” (16.764mm) Bearing Width: .6250” (15.875 mm).
  • Cup OD: 1.7810” / 45.237mm Cup Width: .4750” / 12.065mm.
Check Stock

Bearing Buddy Chrome Bearing Protectors (1.781\ Diameter) With Bras - Pair

  • To determine the correct size, measure the outside diameter of the dust cap or the inside diameter of the hub with calipers. If it measures 1.781" then this is the correct size for your bearing.
  • Measure the outside diameter of the dust cap or the inside diameter of your hub with calipers. If it measures 1.781" then this is the correct Bearing Buddy size for you. If not, refer to the sizing images to find the correct size.
  • For use with 1.781 inches (49.99 mm) hub bore, Outer Bearing Cup: LM-11949, Outer Bearing Cup (race): LM-11910,.
  • Please see measurement instructions (secondary picture) to confirm correct sizing.
Check Stock

Imdinnogo BCZAMD V2 Aluminum Y Carriage Plate Upgrade for Prus i3 Style Heatbed Hotbed Reprap DIY 3D Printer Parts Black

  • Prus i3 V2 board size: 219mmx219mmx3mm. Suitable for Prusa i3 style 3d printer, MK1/2/A/B heated bed..
  • With 2 additional preparation holes for 3-point horizontal adjustment of the block surface..
  • Allows for 3 x linear bearing configurations as well as 4 x bearing configurations. Made of hard, tempered aluminum alloy with brushed and anodized....
  • Skeleton is similar in design to the original Prusa i3 Y model. This helps with Y-motor cleaning when you use LM8UUs on the shoulder straps..
  • Linear bearing mounting options: LM8UUUUa (M3x12 screws and M3 nuts), SC8UUUU (M4x10 screws) and SCV8UUUU (M4x10 screws)..
Check Stock

uxcell LM8UU Linear Ball Bearings 8mmx15mmx24mm Carbon Steel for CNC Machine 3D Printer 10pcs

  • Quantity & Size - These linear motion bearings have a total of 10 bearings for different projects, size about 12 x 20 x 30mm: 12mm inner diameter, 20mm outer diameter, 30mm height.
  • LM12UU Bearings - Linear motion ball bearing is made of high quality bearing steel for low noise and long service life.
  • Excellent Rotating Accuracy - Prevent tilt friction between the roller of roller.
  • Double sealed to avoid contaminants entering and save lubricant.
  • Smooth Running - Moment of inertia is low, low starting torque, easy to control the angle degree, runs smooth on rods.
  • These ball bearings are great for small hobby 12mm shaft or rod projects.
  • Widely Used - LM12uu linear bearing is widely used in automation equipment / Electronics / Instrument / Robot / Food machinery / Packaging machinery / CNC machinery.
Check Stock

uxcell SCS12UU Linear Ball Bearing Slide Block Units, 12mm Bore Dia (Pack of 4)

  • Model: SCS12UU (Bearing No.: LM12UU, Nominal Shaft Diamter (dr): 12mm).
  • Aluminium Alloy Linear Ball Bearing Slide Block Units.
  • Light-weight housing and Chromium Steel bearing ball, good abrasion resistance, high precision and good strength.
  • Smooth moving, low friction, high rigidity and long working life.
  • Suitalbe for kinds of electronic equipment/guide bar, and pillar.
Check Stock

uxcell 4pcs SK20 Aluminum Linear Motion Rail Clamping Guide Support for 20mm Dia Shaft

  • Model: LM3UU, Bore Diamter (dr): 3mm, Outer Diameter (D): 7mm, Total Length (L): 10mm. Metric Double Seal Linear Bearing.
  • Made of high quality bearing steel for low noise and long service life.
  • Linear bearings are part of linear motion systems, used on 3D printers and CNC machines. These bearings have proven to be long lasting and provide precise low friction linear movement..
  • it can cooperate with linear bearing to ensure excellent sports performance under high load or long stroke occasions..
  • Smooth moving, low friction, high rigidity and long life. Bearing various parts of the size is standardized, interchangeable, no worry if replacement of worn..
Check Stock

HABA Kullerbu Expansion Set - Columns - 10 Piece Set for Creating Higher Ball Track Layouts

  • When your Kullerbu set is ready to grow upwards or in length then you generally need additional "construction material" in the form of columns, straight sections, curves and connecting elements..
  • The columns bring height into play and are each provided with height indicators ... both as numbers and as dots. This set includes two 3's, two 4's, one 5 and one 6. Columns are made in Germany..
  • Two 3's combined with a plastic sleeve is the same as one 6. Adding a 5 and a 6 makes 11..and so on. Children are weaving early math skills and problem solving into their building patterns..
  • Intended for use with Kullerbu Base and Connectors #300849 and any Kullerbu track pieces and ramps (all sold separately)..
  • Younger children will usually need some help with the assembly, while older children can experiment by themselves with the various pieces and heights. Suitable for ages 2-8..
Check Stock

Brian Tooley LS1 Rocker Arm Trunion & Bolt Kit 4.8 5.3 5.7 6.0 6.2 Trunnion BTR

  • Brian Tooley LS Rocker Arm Upgrade Trunion Kit Includes Allen Head Bolts.
  • These LS Series retrofit trunion kits are designed to convert stock LS Series rocker arms into captured roller bearing rocker arms. The factory bearings are a known failure on the LS Engines. When they fail they send small bearings through the entire engine. The upgraded trunions use a captured roller bearing allowing for a reliable smooth rotation..
  • The upgraded trunions also give more stability at higher RPM. We use these trunion kits in anything from stock 4.8's all they way up to 1,000+hp turbo motors.The stock factory LS rocker arms are very strong and very light. Once you upgrade the bearings and trunions the rocker arms handle similar to very expensive roller rocker arms (at a fraction of the cost)..
  • These are a must have for anyone installing a aftermarket Cam, Supercharger, Turbo or Nitrous..
  • Used on all LS style rocker arms including the following: LS1 LS2 LS3 LS6 L99, LS4, LS9 LSA LQ4 LQ9 L76 L92 LR4 LM7 L59 LM4 L33 L98 L77 LY6 LFA LZ1 LY2 L20 LMF LH6 LY5 LMG LC9 LH8 LS4 4.8 5.3 5.7 6.0 6.2.
Check Stock

4PCS SBR16UU SBR Linear Ball Bearing Slide Block for SBR16 Linear Rail Guide

  • Model: LM8UU (Nominal Shaft Diamter (dr): 8mm, Outer Diameter (D): 15mm, Total Length (L): 45mm).
  • Round Flange Linear Motion Ball Bearing Bushing Sealed on Both Side.
  • Chromium Steel shell and bearing ball, good abrasion resistance, high precision and good strength.
  • Smooth moving, low friction, high rigidity and long working life.
  • Suitalbe for kinds of electronic equipment/guide bar, and pillar.
Check Stock

Michigan Motorsports LS1 Rocker Arms and Bolts with Trunion Kit Installed FITS LS2 LS6 LQ4 LQ9 LM7 4.8 5.3 5.7 6.0

  • Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with a true roller bearing setup is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo and are the same rockers we utilize on our 1,000 hp Turbo Motor..
  • We utilize LS rocker arms and install new LS1 rocker arm retro-fit trunion kit that replaces the cageless, loose OEM needle bearings and powdered metal trunion with a premium 8620 steel alloy trunion and caged roller bearings for added durability. The caged roller bearings that greatly reduce the possibility of the bearing failure experienced with stock LS1 needle bearings, which can send loose needles throughout the engine upon failure..
  • LS1 style allen head bolts are included for installation. Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with a true roller bearing setup is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo and are the same rockers we utilize on our 1,000 hp Turbo Motor.
  • This kit includes: 16 LS Series Rocker Arms 16 rocker arm trunnions- LS-type retrofit 32 rocker arm bearin....
Check Stock

Brian Tooley LS1 Rocker Arm Trunion Kit 4.8 5.3 5.7 6.0 6.2 Trunnion – No bolts

  • Brian Tooley LS Rocker Arm Upgrade Trunion Kit Doesn’t include upgraded bolts – stock bolts can be used..
  • These LS Series retrofit trunion kits are designed to convert stock LS Series rocker arms into captured roller bearing rocker arms. The factory bearings are a known failure on the LS Engines. When they fail they send small bearings through the entire engine. The upgraded trunions use a captured roller bearing allowing for a reliable smooth rotation..
  • The upgraded trunions also give more stability at higher RPM. We use these trunion kits in anything from stock 4.8’s all they way up to 1,000+hp turbo motors.The stock factory LS rocker arms are very strong and very light. Once you upgrade the bearings and trunions the rocker arms handle similar to very expensive roller rocker arms (at a fraction of the cost)..
  • These are a must have for anyone installing a aftermarket Cam, Supercharger, Turbo or Nitrous..
  • Used on all LS style rocker arms including the following: LS1 LS2 LS3 LS6 L99, LS4, LS9 LSA LQ4 LQ9 L76 L92 LR4 LM7 L59 LM4 L33 L98 L77 LY6 LFA LZ1 LY2 L20 LMF LH6 LY5 LMG LC9 LH8 LS4 4.8 5.3 5.7 6.0 6.2.
Check Stock

uxcell LM16UU Round Flange Linear Ball Bearings, 16mm Bore Dia, 28mm OD, 37mm Length(Pack of 2)

  • Model: LM16UU (Nominal Shaft Diamter (dr): 16mm, Outer Diameter (D): 28mm, Total Length (L): 37mm).
  • Round Flange Linear Motion Ball Bearing Bushing Sealed on Both Side.
  • Chromium Steel shell and bearing ball, good abrasion resistance, high precision and good strength.
  • Smooth moving, low friction, high rigidity and long working life.
  • Suitalbe for kinds of electronic equipment/guide bar, and pillar.
Check Stock

Aexit LM8UU 8mmx15mmx24mm Bearings & Bit-Repair Parts Linear Motion Bushing Ball Bearing Silver Bearings Tone 10pcs

  • Package Content: 10pcs x Linear Ball Bearing.
Check Stock