Reviews Bead Tubes Holder

3M Manual Applicator 400M, 1/case (for 400 mL Sausage Packs)

  • Applies an even layer of mud to inside corners for quick and clean installation of paper-faced corner bead.
  • This is NOT an inside corner finisher. It is for applying mud for corner bead installation..
  • Attaches via spring clip to all brands of Angle Box, Mudrunner, TapeTech Mud Tubes and Columbia Compound Tubes.
  • Heavy-duty plastic construction reduces weight and friction, and promotes smooth application.
  • Works with nearly all shapes of inside paper-faced corner bead.
Check Stock

Motion Pro 08-0471 Bead Buddy II

  • Improves on the original Bead Buddy with durable 6061 aluminum construction, a blue anodized finish and a laser engraved logo.
  • Used to push the tire bead down into the drop center of the rim on off-road wheels while using tire tools to change tires.
  • Hooks over spoke and pushes bead down on opposite side of tire from tire irons.
Check Stock

2 Pack - Tube & Rim Strips 27 x 1-1/4 32mm Schrader Valve Sunlite

  • 2 Tubes: 27" x 1-1/4", Schrader Valve, 32mm.
  • 2 Rim Strips: Rubber 27" x 1-1/4" x 12mm wide.
  • 2 Tubes and 2 Rim Strips, each in their own box..
  • Be sure the tire bead is seated evenly all around the rim by first adding a little air to the tire, checking the bead on both sides and if beaded properly continue filling air to the correct pressure as stated on the tire..
  • For the health of your tire and tube always maintain the proper air pressure. See the side of your tire for minimum and maximum pressures..
Check Stock

Neutec Tubliss The Tubeliss-Core - 21in. Kit TU21

  • It's not about going tubeless for the sake of eliminating tubes..
  • It's all about the countless benefits of going TUbliss® that makes every rider and racer better, faster, and more in control..
  • TUbliss® is, essentially, a high pressure rim lock and seal that secures the entire tire bead to the rim, completely eliminating the use of a conventional tube..
  • TUbliss® allows you to run a low tire pressure (as low as 10 PSI) which dramatically improves traction.
  • especially important for Enduro and Baja racing..
  • Since there's no conventional tube, the days of pinched tubes and flats are over! Even if you get a tire puncture, the bead stays seated to the rim..
Check Stock

2 Pack - Tube, 16 x 1.50-1.95 32mm Reg Schrader Valve, Sunlite, Stroller, Youth Bike, Toddler Bike, Trailer.

  • Stroller, Trailer, Jogger, Kids Bike, Youth, Recumbent bike or any tire with the same dimensions..
  • Be sure the tire bead is seated evenly all around the rim by first adding a little air to the tire, checking the bead on both sides and if beaded properly continue filling air to the correct pressure as stated on the tire. For the health of your tire and tube always maintain the proper air pressure. See the side of your tire for minimum and maximum pressures..
Check Stock

The Beadsmith Wooden Bead Loom, 11” x 7” x 3”, Includes Assembly Instructions, Use to Create Bracelets, Necklaces, Belts, and More

  • METAL BEAD LOOM & QUALITY COMPONENTS: 1 x metal bead loom, 20 x slide clasp tubes, 1 x roll plastic crystal wire, 2 x beading needles, 2 x bead tray, 1 x bead pad, 1 x instructions and 1 pack of mixed color beads.
  • GREAT SIZE & DESIGN: Bead loom measures 11.6 x 2.7 x 3.5 inches, right size for an entry-level project, stable in structure, can control the tension, wire won't slip.
  • 2 LARGE EYE BEADING NEEDLES: Eye opening can be adjusted, fit different sizes thread. Needle is very slim, can fit small glass seed bead. Good ductility, can be bent without breaking when stringing.
  • SLIDER CLASP TUBE EASY TO FINISH THE BRAIDING: Add a clasp to your beading creations, simply end to your beading projects. Slider clasp durable and sturdy, lead and nickel free.
  • COME WITH INSTRUCTIONS, GREAT FOR BEGINNERS: Make it easier for you to can make bracelets, necklaces, earrings, friendship, bracelets, rings, belts, headbands, key chains and more. More weaving patterns and techniques can be found on YouTube.
Check Stock

12 Glass Test Tubes with Bamboo Wooden Rack for Party Shot Glass, Spice, Candy

  • Test Tubes with Rack: This test tube holder features a classic design with small handle inserts on the side for easy carrying.
  • the tubes feature a transparent color and included top corks.
  • Versatile: Use these as candy tubes for a birthday party, as shot glasses, for salts, dried flowers, or loose craft materials.
  • Reliable Quality: The test tube holder is made with a high-quality bamboo wood material, and the tubes are made with a clear glass material.
  • The Perfect Size: Each tube holder measures approximately 8 x 4.5 x 3.3 inches.
  • vials are designed to fit perfectly in the wood rack, each empty round spice jars sets' capacity is 1.7 oz..
  • What’s Included: You’ll receive 1 bamboo test tube rack and 12 clear vials.
Check Stock

EuTengHao Glass Crystal Beads for Jewelry Making 1062Pcs Spacer Beads Faceted Glass Beads Kit with Pendant Jewelrt Findings String for Bracelet Necklaces Earrings Jewelry Making Supplies

  • [2 In 1 Multifunctional]: As a bead spinner, it can quickly connect beads into strings. Fill the bowl at least 1/4 with your seed beads. Place your string on a curved needle, angle your needle into the beading bowl and spin the spindle, the beads will jump right onto the string. As a yarn holder, just put the yarn ball on the holder and pull the yarn, the ball of yarn will rotate with it, and the yarn will no longer be tangled when you knit..
  • [Information For Size]: The complete bead spinner is approx 17.5 cm/ 6.9 inches in height and 9.5 cm/ 3.7 inches in width. There is a gap between the beading bowl and the base, which can rotate freely without noise. Beading needles measure approximately 15.5 cm/ 6.1 inches in total length, the curved design makes it easy to string beads..
  • [Kit Includes]: The beading kit includes a bead spinner, an elastic cord, 2 stainless steel curved needles and seed beads with 12 different kinds of colors. The wooden bead spinner is easy to use, greatly improves the speed of bead string, it is a great pick to work on some fun DIY projects..
Check Stock

LAERDAL Thomas ENDOTRACHEAL Tube Holder - OD Green

  • Hold tubing in place quickly and easily with the Thomas Tube Holder. As the only tube holder with a quick set screw, the Thomas Tube Holder removes the need for tape that can cause irritation and allergic reactions..
  • The Thomas Tube Holder accommodates multiple size endotracheal tubes, as well as Combi Tubes and LMA’s..
  • The hook and loop fastener that straps around the patient's head conveniently fits quickly into place and fastens securely. The Thomas Tube Holder is completely disposable..
Check Stock

Fenix 700 x 25c/28c Thorn Resistant 60mm Presta Valve Bicycle Tube

  • Be sure the tire bead is seated evenly all around the rim by first adding a little air to the tire, checking the bead on both sides and if beaded properly continue filling air to the correct pressure as stated on the tire. For the health of your tire and tube always maintain the proper air pressure. See the side of your tire for minimum and maximum pressures..
Check Stock

Plastic Test Tubes with Rack for Parties and Plant Propagation (1.5 oz, 4 Pack)

  • Assorted Color Plastic Tubes: These colored test tubes are a great way to add fun and practicality to your science party or home garden.
  • Multi-Use: The sturdy black test tube holder and plastic test tubes can easily display drinks at a party, be used for your child’s science-themed activities, or even be used as a propagate station.
  • Material: The propagating tubes and test tube holder rack are made of high-quality polystyrene (PS) material that’s durable and crafted for long term use.
  • Dimensions: Each colorful clear plastic test tube can hold up to 1.5 ounces of liquid, measuring 1 inch in diameter and 7 inches in height.
  • this is a pack of 4 racks and 6 colorful test tubes for propagation or science parties.
Check Stock

BIKEHAND Bike Bicycle Tire Lever Cycling Repair Tool Spoon - Install Difficult Wire Bead and Stubborn Tires - Tire Bead Jack Changing Mounting Seating Tools

  • EASY TO USE: This Bikehand tire fitting tool makes light work of tight tire beads.
  • simply position the slotted jaw onto the opposing rim and place the hook under the stubborn bead, then roll the bead over the rim into place..
  • APPLICATION: Great tool for installing MTB tires and road bikes tires. This tool will NOT damage the the rim edges because the pressing force is from the top to the bottom. Unlike traditional tire levers' leverage to install a tire will damage those weak rim edges such as carbon wheels..
  • PROTECTING INNER TUBES: Fits up to 3" tires. The special bear jack tool will NOT puncture any inner tube. Save time and effort! Length: 23cm or 9". Weight: 120g or 4.25 oz..
  • STRONG: The jack is made of strong nylon plastic which prevents scratching rims and puncturing inner tubes..
  • ORDER NOW, WORRY FREE! We're so confident about our product quality that we can provide a life time warranty! Made in Taiwan..
Check Stock

Fenix 20 x 2.125 /2.35 /2.40 Thorn Resistant 33mm Schrader Valve Bicycle Tube

  • Be sure the tire bead is seated evenly all around the rim by first adding a little air to the tire, checking the bead on both sides and if beaded properly continue filling air to the correct pressure as stated on the tire. For the health of your tire and tube always maintain the proper air pressure. See the side of your tire for minimum and maximum pressures..
Check Stock