Reviews Battery Terminal Puller

ATPEAM Battery Terminal and Wiper Arm Puller Remove Tool Heavy-Duty Arm Bearing Remover Puller Repair Tool Kit 6-28 mm

  • Great Material: Made of 45 # carbon steel, strong metal with special heat treatment process, high hardness, corrosion-resistant forged and heat treated steel jaws, can serve for long time.
  • Size: Jaw opening: 1/16" - 1-1/16" (6-28mm).
  • Easy to Use: Tighten knurled cone to force jaws under the cable clamp, turn center screw to lift clamp off terminal, the puller screw pad is designed to fit the top of the spline post for easy pulling..
  • Multifunction: Windshield Wiper Removal Tool is also can be used to remove bolted-on windshield wiper arms that fit over a tapered spline..
  • Package Included: 1 x Wiper Arm and Battery Terminal Bearing Remover Puller Tool.
Check Stock

OTUAYAUTO Battery Terminal and Wiper Arm Puller

  • This Puller designed for professionally dual-purpose use.
  • Easy and safely to remove the stuck on the rear wiper arm.
  • Use to remove battery terminal clamp without damage to cause battery post.
  • Tighten knurled cone to force jaws under the cable clamp. Also removes bolted on windshield wiper arms that fit over a tapered spline.
Check Stock

The Real Lisle 65700 Broken Plug Remover Kit for Ford 3V Engine

  • A Three Step Kit for Removing Spark Plugs that have Seized in the Engine Head and Broken..
  • Includes a unique Porcelain Puller Tool that snaps onto the terminal of a broken spark plug to pull the porcelain out..
  • Also includes a Porcelain Pusher for when the porcelain breaks off in the spark plug tip and a Self-Tapping Puller to remove the seized metal tip..
  • Comes in a blow molded plastic case for storage..
  • Includes a unique Porcelain Puller Tool that snaps onto the terminal of a broken spark plug to pull the porcelain out.
Check Stock

Mekar Broken Spark Plug Remover Kit Compatible with Ford 3V Engine

  • Unique porcelain puller tool can be stuck on the terminal of the broken plug to pull out the porcelain.
  • Three Step Kit for removing Plugs that have seized in the Engine Head and broken.
  • Including a porcelain pusher used when the tip of the porcelain is broken and a self-tapping nail puller used to pull out the stuck metal tip.
  • Includes a unique porcelain puller tool that can be stuck on the terminal of a broken plug to pull the porcelain out.
  • It also includes a porcelain push rod (used to break the porcelain plug at the tip) and a self-tapping tool to remove the stuck metal....
Check Stock

Firweland 65700 Broken Spark Plug Remover Kit Compatible with Fo-rd 3V Engine

  • Fit for Following Vehicles: Fo-rd 3V Engine.
  • Function: for removing Spark Plugs that have seized in the Engine Head and broken, Unique Porcelain Puller Tool that snaps onto the terminal of a....
  • This Broken Spark Plug Remover Includes: A Porcelain Pusher, A Self-Tapping Puller and A Unique Porcelain Puller Tool..
  • If you have any other questions that you do not understand, please feel free to contact us, we are glad to answer your questions..
Check Stock

Vignee 82 Pcs Terminal Removal Key Tool, Terminal Pins Puller Repair Removal Tools for Car Pin Extractor Electrical Wiring Crimp Connectors and Most Connector Terminal with a Protective Bag

  • Terminal Removal Key Tool, with a Protective Bag.Terminal Pins Puller Repair Removal Tools for Car Pin Extractor Electrical Wiring Crimp Connectors and Most Connector Terminal..
  • Effortless Terminal Removal: The Terminal tool no need to pry the terminals! just insert our tool, push and pull the terminal pins for removal. Our tool provides extra leverage so you can easily remove the wire.The terminal pin back set is the most convenient line inspection and removal kit..
  • High Quality：The Pin extractor tool made of premium steel spring plate + plastic. It is flexible and durable.The width of the pin can be manually changed and it would restore its original shape..
  • Easy and Safe to Use: It is easy to remove the terminal wire from the harness connector and add a new wire without any damage.Easy to use, you can maintain the factory original harness and plug in your own electronic device without any destroying..
  • Wide Compatibility: These terminals removal tools are common tools for most connector terminals, suitable for most cars, such as:motorcycles and other electronic devices like household appliances..
Check Stock

2PCS Battery Terminal Connectors 4 Way Quick Release Disconnect Battery Terminals Positive Negative Battery Cable Ends for SAE/JIS Type A Posts by ZONBANG Copper

  • 【4 WAY BATTERY TERMINAL】There are 4 posts for wire connection in the battery terminal connectors which are mainly used for SAE / JIS Type A car battery. The purpose of the design is for multiple cable connections..
  • 【EXCELLENT QUALITY】With superior corrosion resistance and electrical conductivity, the tinned copper quick release battery terminal also can reduce voltage distortion and transmission loss..
  • 【EASY TO IDENTIFY】With the signs of positive “+” and negative “-”, the quick disconnect battery terminal is easy to identify. And the battery terminal works great for replacing worn out and corroded terminals. Tip: Make sure to choose the correct terminal for the correct polarity..
  • 【PACKAGE INCLUDE】You will receive 2PCS battery terminal connectors(positive and negative), 2PCS anti-corrosion fiber washers and an allen wrench..
  • 【WIDE APPLICATION】The battery terminal connectors can be used for Trailer, Winch, Truck, Tractor, Jeep, RV, Cars, Vans, Caravan, Boat, etc..
Check Stock

Battery Terminal Connectors(1 pair), Positive & Negative Auto Battery Cable Terminal Top Post With plastic bottoms(Copper Tinned),Fit For Nissan 243407F000,243407F001 Altima Murano etc

  • Specifications:Positive Battery terminal hole dia: 0.71 IN.Negative battery terminal hole dia:0.63 IN..
  • Product Quality:The battery terminal connector is made of high quality copper.The has a galvanised surface to give it better corrosion resistance. There is a plastic bottom and the screws are made of iron..
  • Fitment: Compatible with Many Vehicles This Battery Terminal Set Fit For: Nissan Altima Murano Pathfinder Maxima Quest Rogue Titan Versa etc. Replaces part # 243407F000 243407F001.
  • Package List: 1 Pair Battery Terminals. 1 PCS Battery Terminal Cleaning Brush. 1 Pair Battery Terminal Anti Corrosion Washers.
  • SATISFACTION&GUARANTEED:Purchase this Car Battery Cable Terminal Clamps Connectors with a 6 Month Warranty. We provide carefree return, If you have any issues with your order, contact us and we will make it right..
Check Stock

Battery Cutoff Switch Top Post Battery Disconnect Switch Rustproof Safe Brass Stable Current Good Electrical Conductivity Battery Terminal Link Quick Switch for 6V 12V Car RV ATV

  • Wide Application: This battery terminal cutoff switch has wide range of uses, and is compatible with 6V 12V cars, vans, large trucks, pickups, buses, etc..
  • Strong Function: The battery terminal isolator switch is used for battery to isolate and secure the electrical system, and can eliminate any power draw from the battery when vehicle or boat is not in use, disconnects the battery safely..
  • Good Electrical Conductivity: The battery terminal isolator switch can be installed on the negative terminal of the battery, which can stable current, and protect the battery, and prevent leakage..
  • Brass Material: This top post battery disconnect switch is made of brass material, which is rust resistant, good electrical conductivity, durable and safe to use..
  • High Reliability: The battery terminal isolator switch is professionally manufactured, and battery terminal link quick switch has high performance, strong reliability, making sure use..
Check Stock

TKDMR 2Pairs Car Battery Cable Terminal Clamps-Connectors - Battery Terminal with Plastice Cover,Good Contact,Corrosion Resistance,Applicated in Car,Van.

  • √【Package Includes】: Our kit includes 2 pair of Negative and Positive Battery Cable Terminal Clamps Connectors and 4 pieces Pure Copper Wire Lugs Battery Cable Ends Copper Eyelets Tubular Ring Terminal Connectors..
  • √【High Quality】: Our Wire Lugs Eyelets Tubular Ring Terminal all are made of pure copper.And the Battery Terminals connectors has plastic cover, which is connected better than zinc alloy and has better corrosion-resistance..
  • √【Size】: Positive Battery Terminal Connectors:11/16"(17mm).
  • Positive Battery Terminal Connectors: 5/8"(16mm).
  • √【Applicated Scene】: It is used for automobiles, trucks and caravan battery terminal connector..
  • √【Quality Guarantee】: We are manufacturers. So don't worry about quality. We are highly confident with our products.you won't regret it if you got it! Buy it now!.
Check Stock

LotFancy Battery Terminal Connectors Tinned Brass 4PCS Quick Release Disconnect Car Battery Terminal 4 Way Positive Negative for SAE/JIS Type A Posts

  • 【4 Way Battery Terminal】Pack of 4. This battery terminal connector has 4 post for wire connection. Designed for multiple cable connections. The provided Alan wrenches make for easy installation. Wiring is easy to modify. Convenient wiring and firm connection. Fits on round post auto batteries SAE/JIS Type A posts. NOTE: Do not overtighten the screws.
  • 【Dimension】For wires diameters 4.1 – 8.2mm (AWG gauges 0 – 16) or section 13.5 – 53.5mm². Minimum wire size: 16mm (5/8"). Max wire clamp: 9.5mm/0.37in, Mini wire clamp: 6.5mm/0.25in. After installing battery, connects to the battery posts by pressing down the lever, so no tools needed.
  • 【Positive & Negative Labeled】 Positive (17.5mm-19.1mm) Battery Terminal Connector + Negative (15.9mm-17.5mm) Battery Terminal Connector. The Positive Negative Battery Terminal Clamp is Suitable for Most Battery models. Works great for replacing worn out and corroded terminals.
  • 【Sturdy & Durable】The battery terminals are made of tinned brass, with good electrical conductivity and corrosion resistance, which can reduce voltage distortion and transmission loss.
  • 【Wide Application】These battery terminal connectors can be used for Cars, Vans, Caravan, Motorhomes, Truck Batteries, Car Audio, etc. Ju....
Check Stock

Spurtar Battery Terminal Connectors 0/4/8/10 Gauge AWG Heavy Duty Top Post AMP Battery Terminal Auto Car Audio Battery Terminal Cable Ends Replacement Positive & Negative with 2 Clear Covers and Shims

  • Secure & Stable: Spurtar battery terminals are perfect for car battery terminals to make a tight and secure connection without any hassle with complex installation. It's the perfect tool to help protect the battery terminal ends in daily use..
  • 2/4/8/10 AWG Gauge Inputs: Battery terminal connectors have 4 different sizes of a wiring outlet for easy wiring modification. Includes Positive (19mm) Battery Terminal Connector + Negative (17mm) Battery Terminal Connector.
  • Quality Material: Battery connectors are made of zinc alloy and copper material for strong electrical conductivity to help reduce current transmission loss. Also, it can protect the battery post against corrosion to prolong the lifespan.
  • Universal Fit: Spurtar Car battery terminal clamps is the best solution to organize and connect multiple cables together. Suitable for most models of car Audio battery and it works great to replace the worn out and corroded terminals.
  • NOTE: The hole of the Positive Terminal is 19mm while the Negative Terminal is 17mm. The Positive is Bigger than The Negative, please check before purchasing.
Check Stock

LotFancy Battery Terminal Connectors, Tinned Brass, 2PCS Quick Release Disconnect Car Battery Terminal, Positive Negative for SAE/JIS Type A Posts

  • 【4 Way Battery Terminal】This battery terminal connector has 4 post for wire connection. Designed for multiple cable connections. The provided Alan wrenches make for easy installation. Wiring is easy to modify. Convenient wiring and firm connection. Fits on round post auto batteries SAE/JIS Type A posts. NOTE: Do not overtighten the screws.
  • 【Dimension】For wires diameters 5.2 - 7.4mm (AWG gauges 1 - 4) or section 16 - 35mm. Minimum wire size: 16mm (5/8 inch ). Max wire clamp: 9.5mm/0.37in, Mini wire clamp: 6.5mm/0.25in. After installing battery, connects to the battery posts by pressing down the lever, so no tools needed.
  • 【Positive & Negative Labeled】 Positive (17.5mm-19.1mm) Battery Terminal Connector + Negative (15.9mm-17.5mm) Battery Terminal Connector. The Positive Negative Battery Terminal Clamp is Suitable for Most Battery models. Works great for replacing worn out and corroded terminals.
  • 【Sturdy & Durable】The battery terminals are made of tinned brass. Tinned brass is brass coated by a base alloy such as solder better known as tin. It strengthens the brass's natural properties, making it better equipped to resist humidity, high temperatures and wet environments.
  • 【Wide Application】These battery terminal connectors can be used for ....
Check Stock