Reviews Barn Door Hardware Harbor Freights

SKYSEN 6FT Sliding barn Door Hardware kit, Barn Door Track, 1/4” Thick Material- Combination Track- Smooth and Quiet- Easy to Install- Black (J Shape-5)

  • [SUPER QUALITY RAW MATERIAL] Barn door hardware kit are made of 1/4” thick carbon steel (Maximum load 265lbs). Barn door wheel are made of POM (Stronger than plastic or nylon). Barn door spacer is also made of carbon steel (More stable than other plastic spacer). The bolts and leg screws are 8.8 grade (Keep the barn door hardware system last for long). The surface is spray black powder coat (Anti-rust, Looks smooth)..
  • [EASY TO INSTALL] Barn door track pre-drilled hole space is 16", Step by Step Instruction included. Our Instruction is listing every step for installation from A to Z. You can finish the installation of barn door hardware kit in half an hour if you get 2 workers. In case you get any problem or missing parts during installation, please free feel to contact us via amazon..
  • [IF MY BARN DOOR FIT THIS SIZE] 6FT Barn door hardware kit fit for door panel width up to 36”, Fit for door thickness from 1-3/8" to 1-3/4"(If you your barn door panel is too thin, then you can using the 5mm black spacer pad inside package, if your barn door is too thick, then you need to buy longer bolt extra). If you have a door way trim, then you need to buy an extra trim board to install the barn door track or just remove your trim..
Check Stock

SKYSEN 6FT Barn Door Hardware Kit, Sliding Barn Door Hardware Kit, Barn Door Track, Combination Track- Smooth and Quiet- Easy to Install- Manual Included- Lite Version- Black (J-Lite-5)

  • ✅[INNOVATION DESIGN-LIGHT VERSION] By using the light version carbon steel for barn door hardware system(lighter but hold maximum 265lbs, More stronger and stable), The barn door track will be easy to lift up during installation. Low clearance barn door hardware, Less space required, The barn door roller is shorter, Which make the space required from top of barn door to ceiling will be only 5"..
  • ✅[PREMIUM RAW MATERIAL] Barn door hardware kit are made of premium quality carbon steel in thickness of 5/32", Which make the barn door kit system more sturdy and stable durability. The wheel part are made of POM(better than steel, few scratch to barn door track), 2 pcs Bearings in side wheel, All these ensure the sliding will be smoothly and quietly..
  • ✅[REASONS FOR CHOOSING US] Get super quality barn door hardware kit from us ,All the barn door hardware kit have been inspected in factory before delivery，Passed 100,000 times opening and closing test.Get barn door hardware kit with a manufacturer price,why not ? In case you got any confustions on installation or missing parts after got the package ,kindly feel free to contact us via amazon directly ,we will ....
Check Stock

SANKEYTEW 6FT Barn Door Hardware Kit, lite Version- Combination Track- Easy to Install- Manual Included- Black (J-L-5)

  • ✅[UPGRADE DESIGN-LITE VERSION] Adapt the new type carbon steel instead of the standard one(lighter but load maximum 265lbs, More sturdy and stable), Make it easy to hold up the barn door track during installation. Low clearance barn door hardware system, Less space required above the doorway, only 5" required from top of barn door to ceiling ..
  • ✅[HIGH STANDARD RAW MATERIAL] Barn door hardware kit are made of Super quality steel in 5/32" thickness, Ensure barn door system will be more sturdy and stable durability. The wheel part are pom made with 2 pcs Bearings inside(more function than steel, less scratch to barn door rail), All these making the sliding smoothly and quietly..
  • ✅[WHY US] Get high quality barn door hardware kit from us ,All the barn door track had inspected in factory before delivery，Passed more than 100,000 times opening and closing test. Barn door hardware kit with a manufacturer price,why not ? In case you got any confustions on installation or missing parts after got the package ,kindly feel free to contact us via amazon directly ,we will get back to you in 24 hours ,thank you ..
  • ✅[DO MY BARN DOOR FIT] 6ft Barn door hardware kit hold up to 265 lbs, Fit for door panel width up to 36", Fit for door panel thickness from 1-3/8" t....
Check Stock

DaAzHai 6 Ft Sliding Barn Door Hardware:Easy to Install -Smoothly and Quietly Barn Door Hardware One-Piece Rail Low Ceiling Barn Door Track

  • At DaAzHai , all of our barn door hardware is made from quality materials and is handcrafted by skilled artisans.Low clearance barn door hardware, Less space required because of barn door hardware kit are made of premium quality carbon steel. Attention: the steel bar is in pieces that have to be assembled..
  • DaAzHai sliding barn door hardware use the light version carbon steel for barn door track system. Our barn door hardware kit is lighter but hold more stronger and stable. Fit door weight capacity: 245lbs.
  • Fit door panel thickness: 1-5/8" to 1-3/4''. If the door is thicker , please add a piece of spacer we provided to increase the distance between track and wall. Perfect for indoor decoration in kitchen, bedroom, dressing room, club, pub and so on..
  • DaAzHai barn door hardware comes complete and ready for you to install yourself. We provide simple instructions so you can quickly install your barn door hardware stress-free. Our instruction explains every step with words and picture and all data is measured in inch. It is very easy for you to take a reference during the installation..
  • DaAzHai barn door hardware kit includes (2)Steel Hanger, (5) Flat Track, (9) Adjustable Spacer, (1) Floor guide, (9) Fastener Screw, (2) Doo....
Check Stock

DaAzHai 5 Ft Sliding Door Hardware:Easy to Install -Smoothly and Quietly Sliding Barn Door Hardware Kit Single Door Track Low Ceiling Barn Door Hardware Kit, Modular Track with Stable Connection

  • At DaAzHai, all of our low clearance barn door hardware is made from quality materials and is handcrafted by skilled artisans. Low clearance barn door hardware, less space required because of low profile barn door hardware are made of premium quality carbon steel. Attention: the steel bar is in pieces that have to be assembled..
  • DaAzHai sliding barn door hardware use the light version carbon steel for barn door track system. Our barn door hardware kit is lighter but hold more stronger and stable. Fit door weight capacity: 265 lb.
  • Fit door panel thickness: 1-5/8" to 1-3/4". If the door is thicker , please add a piece of spacer we provided to increase the distance between track and wall. Perfect for indoor decoration in kitchen, bedroom, dressing room, club, pub and so on..
  • DaAzHai sliding closet door hardware comes completely and get ready for you to install by yourself. We provide simple instructions so you can quickly install your sliding barn door with hardware kit included stress-free. Our instruction explains every step with words and picture and all data is measured in inch. It is very easy for you to take a r....
Check Stock

HOMCOM 6' Rustic Interior Sliding Barn Door Mounting Hardware Kit, White

  • 2-Door Hanging Rail: Industrial sliding barn door hardware kit will change the traditional barn door into a sliding door, that is useful and practical. Fits for two barn doors with a thickness of 35-45mm and 40-45mm.
  • Security Assurance: This barn door hardware kit is made of quality carbon steel for strength, which can hold a maximum of 220 lbs..
  • Space Saver: Saving space is a piece of cake with this classic sliding barn door. Multiple rooms can be opened without the hassle of swinging doors..
  • Package included: Instruction and hardware included to help you solve most installation problems. DOOR NOT INCLUDED..
  • Simple Assembly: There are pre-drilled holes in the barn door track, and step-by-step instruction is included. 2 workers can complete the installation of barn door hardware in half an hour..
Check Stock

WINSOON 4FT-16FT Metal Sliding Bypass Barn Wood Door Hardware Kit System Bending Design Wall Mount Bracket Fit Double Wooden Doors (4FT)

  • [HARDWARE MATERIAL] - WINSOON barn door hardware is made using premium carbon steel. High quality steel with frosted black surface makes it heavier than other sliding barn door hardwares amd fire proof, water proof and rust proof. It also allows you to install your barn doors interior and exterior..
  • [EASY TO INSTALL] - This hardware requires at max 2 people. Super detailed installation manual included that the measurements are all in inches. All tracks can be connected with other tracks with a junction plate. Professional customer service team help you solve all installation problems in time, accept custom-made barn door hardware. THE CLEARANCE from the top of your door to the ceiling should be at least 8 inch to install the bypass barn door hardware..
  • [PACKAGE INCLUDED] - A Barn Door Hardware Kit (2x 4FT Rails,4x Hangers,6x Rail Supports,3x U Brackets,4x Door Stops,4x Anti-jump Pas, 4x End Caps,2x Floor Guides,1x Hex Key. The rail is pre-drilled holes for 16 inches wall studs. Rail and hanger arms are 1-9/16" wide and 1/5"thick. All other necessary hardware are included as you see in the pictures. * DOOR NOT INCLUDED.
  • [DOOR WEIGHT CAPACITY] - Max 230 lbs per door. This 4FT bypass barn door hardware can be used for two 20"-24" wide doors. Fit 1-3/8" to ....
Check Stock

WINSOON 4FT-16FT Metal Sliding Bypass Barn Wood Door Hardware Kit System Bending Design Wall Mount Bracket Fit Double Wooden Doors (5FT)

  • [HARDWARE MATERIAL] - WINSOON barn door hardware is made using premium carbon steel. High quality steel with frosted black surface makes it heavier than other sliding barn door hardwares amd fire proof, water proof and rust proof. It also allows you to install your barn doors interior and exterior..
  • [EASY TO INSTALL] - This hardware requires at max 2 people. Super detailed installation manual included that the measurements are all in inches. All tracks can be connected with other tracks with a junction plate. Professional customer service team help you solve all installation problems in time, accept custom-made barn door hardware. THE CLEARANCE from the top of your door to the ceiling should be at least 8 inch to install the bypass barn door hardware..
  • [PACKAGE INCLUDED] - A Barn Door Hardware Kit (2x 5FT Rails,4x Hangers,8x Rail Supports,4x U Brackets,4x Door Stops,4x Anti-jump Pas, 4x End Caps,2x Floor Guides,1x Hex Key. The rail is pre-drilled holes for 16 inches wall studs. Rail and hanger arms are 1-9/16" wide and 1/5"thick. All other necessary hardware are included as you see in the pictures. * DOOR NOT INCLUDED.
  • [DOOR WEIGHT CAPACITY] - Max 230 lbs per door. This 5FT bypass barn door hardware can be used for two 26"-30" wide doors. Fit 1-3/8" to ....
Check Stock

WINSOON New Bending Room Wall Mount Bypass Double Black Sliding Wood Door Roller Hardware Track Pulley Folding Steel Kit (6FT / Two Door Set)

  • [HARDWARE MATERIAL] - WINSOON barn door hardware is made using premium carbon steel. High quality steel with frosted black surface makes it heavier than other sliding barn door hardwares amd fire proof, water proof and rust proof. It also allows you to install your barn doors interior and exterior..
  • [EASY TO INSTALL] - This hardware requires at max 2 people. Super detailed installation manual included that the measurements are all in inches. All tracks can be connected with other tracks with a junction plate. Professional customer service team help you solve all installation problems in time, accept custom-made barn door hardware. THE CLEARANCE from the top of your door to the ceiling should be at least 8 inch to install the bypass barn door hardware..
  • [PACKAGE INCLUDED] - A Barn Door Hardware Kit (2x 6FT Rails,4x Hangers,10x Rail Supports,5x U Brackets,4x Door Stops,4x Anti-jump Pas, 4x End Caps,2x Floor Guides,1x Hex Key. The rail is pre-drilled holes for 16 inches wall studs. Rail and hanger arms are 1-9/16" wide and 1/5"thick. All other necessary hardware are included as you see in the pictures. * DOOR NOT INCLUDED.
  • [DOOR WEIGHT CAPACITY] - Max 230 lbs per door. This 6FT bypass barn door hardware can be used for two 32"-36" wide doors. Fit 1-3/8" to....
Check Stock

Winsoon 16FT Sliding Bypass Barn Door Hardware Kit for Double Wooden Doors, Low Profile, Overlapping Tracks, Heavy Duty, 5-16FT for Choose

  • [HARDWARE MATERIAL] - WINSOON barn door hardware is made using premium carbon steel. High quality steel with frosted black surface makes it heavier than other sliding barn door hardwares amd fire proof, water proof and rust proof. It also allows you to install your barn doors interior and exterior..
  • [EASY TO INSTALL] - This hardware requires at max 2 people. Super detailed installation manual included that the measurements are all in inches. All tracks can be connected with other tracks with a junction plate. Professional customer service team help you solve all installation problems in time, accept custom-made barn door hardware. THE CLEARANCE from the top of your door to the ceiling should be at least 8 inch to install the bypass barn door hardware..
  • [PACKAGE INCLUDED] - A Barn Door Hardware Kit (4x 5FT+2x 6FT Rails,4x Junction Plate,4x Hangers,26x Rail Supports,13x U Brackets,4x Door Stops,4x Anti-jump Pas, 4x End Caps,2x Floor Guides,1x Hex Key. The rail is pre-drilled holes for 16 inches wall studs. Rail and hanger arms are 1-9/16" wide and 1/5"thick. All other necessary hardware are included as you see in the pictures. * DOOR NOT INCLUDED.
  • [DOOR WEIGHT CAPACITY] - Max 230 lbs per door. This 16FT bypass barn door hardware can be used for two 92"-96....
Check Stock

WINSOON Sliding Double Track Bypass Barn Door Hardware，U-Shape Bracket Low Ceiling，J Shape Hanger，Rustic Heavy Duty Interior Exterior (9FT Track Bypass kit)

  • [HARDWARE MATERIAL] - WINSOON barn door hardware is made using premium carbon steel. High quality steel with frosted black surface makes it heavier than other sliding barn door hardwares amd fire proof, water proof and rust proof. It also allows you to install your barn doors interior and exterior..
  • [EASY TO INSTALL] - This hardware requires at max 2 people. Super detailed installation manual included that the measurements are all in inches. All tracks can be connected with other tracks with a junction plate. Professional customer service team help you solve all installation problems in time, accept custom-made barn door hardware. THE CLEARANCE from the top of your door to the ceiling should be at least 8 inch to install the bypass barn door hardware..
  • [PACKAGE INCLUDED] - A Barn Door Hardware Kit (4x 4.5FT Rails,2x Junction Plate,4x Hangers,12x Rail Supports,6x U Brackets,4x Door Stops,4x Anti-jump Pas, 4x End Caps,2x Floor Guides,1x Hex Key. The rail is pre-drilled holes for 16 inches wall studs. Rail and hanger arms are 1-9/16" wide and 1/5"thick. All other necessary hardware are included as you see in the pictures. * DOOR NOT INCLUDED.
  • [DOOR WEIGHT CAPACITY] - Max 230 lbs per door. This 9FT bypass barn door hardware can be used for two 50"-54" wide ....
Check Stock

TSMST 6FT Sliding Barn Door Hardware Kit, Top Mount Stainless Steel Heavy Duty Sturdy Barn Door Track for Single Wood Door, Slide Smoothly Quietly (T Style)

  • ❤️High Quality Material: For those who want to make their sliding door more attractive, TSMST's barn door hardware kit is the answer. Made of high-quality stainless steel, professional anti-corrosion operation, it's sturdy and durable..
  • ❤️Right Choice to Your Door: This barn door hardware kit fits 1 3/16"- 1 5/8" thickness door.
  • The 6FT sliding door hardware kit accommodates the maximum door width: 36"..
  • ❤️Packages Included: 1 set barn door hardware kit [1x Spliced 6ft Rail, 2xRoller, 2xDoor Stop,1xFloor Guide.
  • All other necessary hardware is included as you see in the pictures.] Door panel is not contained..
  • ❤️Easy to Install: TSMST - Barn Door Hardware Kit is an outstanding barn door hardware kit that is easy to install. It has the ability to slide effortlessly on its track. These barn door hardware kits are the perfect way to add a rustic and unique touch to your home..
  • ❤️Reliable Serivice: Through rigorous quality-control, meticulously packed to avoid scratches on shipping.
  • The professional customer support team helps you solve any questions in time..
Check Stock

TSMST 6.6FT Sliding Barn Door Hardware Kit, Top Mount Stainless Steel Heavy Duty Sturdy Barn Door Track for Single Wood Door, Slide Smoothly Quietly (T Style)

  • ❤️High Quality Material: For those who want to make their sliding door more attractive, TSMST's barn door hardware kit is the answer. Made of high-quality stainless steel, professional anti-corrosion operation, it's sturdy and durable..
  • ❤️Right Choice to Your Door: This barn door hardware kit fits 1 3/16"- 1 5/8" thickness door.
  • The 6.6FT sliding door hardware kit accommodates the maximum door width: 39"..
  • ❤️Packages Included: 1 set barn door hardware kit [1x Spliced 6.6ft Rail, 2xRoller, 2xDoor Stop,1xFloor Guide.
  • All other necessary hardware is included as you see in the pictures.] Door panel is not contained..
  • ❤️Easy to Install: TSMST - Barn Door Hardware Kit is an outstanding barn door hardware kit that is easy to install. It has the ability to slide effortlessly on its track. These barn door hardware kits are the perfect way to add a rustic and unique touch to your home..
  • ❤️Reliable Serivice: Through rigorous quality-control, meticulously packed to avoid scratches on shipping.
  • The professional customer support team helps you solve any questions in time..
Check Stock