Reviews Barbed Swivel Connectors

FERRODAY 5/16 Disconnects Set 7/16-20UNF Flared Gas In and Liquid Out Swivel Nut Stems for Cornelius Keg Swivel Nuts for Corny Keg - 2 PCS

  • Makes it possible to attach your 5/16" tubing, works with Pin Lock and Ball Lock MFL Connectors.
  • Use this setup to easily connect/ disconnect your line from a home brew keg coupler.
  • 5/16" Barb to 7/16-20 UNF Flare Swivel Nut is used to connect most keg connected lines..
  • Kegging Essentials, brew kits and accessories, great for home or commercial draft beer system.
Check Stock

300Pcs Barbed Connectors Irrigation Fittings Kit HOINCO Drip Irrigation Barbed Connectors for 1/4 Inch Tube for Flower Pot Garden Lawn Elbows End Plug Straight Barbs Tees 4-Way Coupling

  • 【Barbed Connectors Irrigation Fittings Kit】：300Pcs irrigation kits total, including 100Pcs straight barbs, 80Pcs tees, 40Pcs oblique barbed elbows fittings, 40Pcs end plug, 40Pcs 4-way coupling. Drip irrigation connectors can save the water needed for irrigation in an efficient way and easily pass water to anywhere, bringing more convenience for your life..
  • 【Drip Irrigation Barbed Connectors 】：Drip irrigation barbed connectors are made of high-strength plastic, which has a long service life and is not easy to fold and deform. The sufficient quantity is enough for your daily use and replacement..
  • 【Suitable Size】：These irrigation kits are designed with barbs and can be used to connect 1/4 inch drip irrigation pipes. (Suitable for 4mm ID 7mm OD tube). Our drip irrigation accessories help to build a practical and useful irrigation system. Please check the size carefully before purchasing..
  • 【Easy to Install】：Directly insert the irrigation fittings kit at the end of the pipe, without tools or glue, making gardening more convenient and efficiently. If convenient, you can also use a heat gun or hair dryer to soften the end of the tubing before inserting..
  • 【Wide Applications】：Suitable for gardens, patio, lawn, flower beds, terra....
Check Stock

BEADNOVA Drip Irrigation Parts 10 Pcs 1/2 Inch Barbed End Plugs Goof Plugs Drip Irrigation Fittings Drip Line Connectors for 1/2 Inch Irrigation Tubing Garden Watering System 10pcs

  • PACKAGE INCLUDES: Includes in a pack 10 pcs end plug barbed connectors, approximately 1.7” or 40mm long. Drip irrigation barded suitable for 1/2 Inch irrigation tubing..
  • STRONG MATERIAL: This end plug is made of high grade plastic which is strong and good for both indoor and outdoor use..
  • EASY INSTALLATION: Connect irrigation tubing by simply insert this barbed connector at the ends of the tube. No tools or glue required. Push the tube firmly into the irrigation barbed to avoid leakage. Soften the end of tube with blower if you find the tube is too stiff before inserting..
  • WIDE APPLICATIONS: These irrigation fittings are essential for watering system, drip system and sprinkle system in vegetable gardens, flower beds, greenhouse and patio. Use irrigation barbed to build yourself a minimal maintenance watering system, save water and energy..
  • COME WITH STORAGE BAG: Barded connectors are packed into a plastic bag for easy storage..
Check Stock

50 Pcs Drip Irrigation Coupling Fittings 1/4 Drip Irrigation Tubing Straight Coupling/Single Barbed Connectors for Universal 1/4 Inch Irrigation Tubing

  • ✔【High Quality】: Made of high-impact, high-strength plastic material, Durable, strong, water resistant.
  • ✔【Fits 1/4 inch irrigation hose】: This irrigation straight coupling connectors connect two sections of any brand 1/4" drip irrigation tubing in a straight line. Two barbed ends makes the connection more strong and firm. Kindly Note:Please check the size carefully before purchasing..
  • ✔【Easy to Install】: This coupling fittings for 1/4 inch irrigation tubing is easy to be installed without glue, tools, or clamps. Push the tubing firmly over the tee fitting.Tips:Put the tubing end into 75°~80° hot water for 30 seconds before pushing them..
  • ✔【Wide Application】:This drip irrigation single barbed connector for 1/4 inch irrigation tubing helps to build a maintenance-free irrigation system, it is ideal to be applied for garden, greenhouse, flower bed, patio and other agricultural watering system..
  • ✔【 Package Included】: 50 pieces of 1/4 inch barbed straight coupling fittings connectors are included in..
Check Stock

Keg Disconnect Ball Lock MFL Ball Lock Fittings Keg Connectors – Keg Coupler Stainless Ball Lock Keg Fittings 12-Piece

  • ... YOUR FAVORITE BEVERAGES: Use the G. Francis Ball Lock Keg Fitting Ball Locks 12-Piece Ball Lock Quick Disconnect Set with Liquid & Gas Disconnects, Swivel Nuts, & Hose Clamps to ferment and dispense craft cocktails, soda, and other beverages from your existing keg.
  • USE YOUR KEG: Each of the ball lock keg connectors (fittings) have an approximate 2.2-inch height and 1.3-inch outside diameter (5.6cm x 3.3cm) and is compatible with ball lock Cornelius (Corny) kegs and keg couple adapters for homebrewing.
  • Hose clamps have 0.2-inch to 0.5-inch (6-12mm) diameter while the barbed swivel nuts have 5/16-inch outside diameter (OD) fitted for 1/4-inch or 3/16-inch inside diameter (ID) hoses on your 3, 5, or 10 gallon keg.
  • BUILT TO LAST: Keg ball lock quick disconnects and hose clamp wings constructed from ABS plastic that resists rust and corrosion.
  • Swivel nuts and clamps constructed from food-grade stainless steel for maximum strength and longevity.
  • INSTALL EASILY: Tighten the swivel nut connecting the flare fitting before use.
  • Ensure correct fittings are installed on input and output posts – Light gray disconnect for gas inlet and black disconnect for fluid outlet.
  • To install fittings, pull up lever on ball ....
Check Stock

PVC Barbed Tee Fitting - 3/4 PVC Tee Barb Fitting - 3/4 Inch Barbed Insert Tee - Hose Barb Fittings for Tubing Hose Water Line - SCH 40 Barbed Hose Tee Fitting – Barbed Tee PVC Fitting

  • TOP QUALITY: The water line barbed fitting tees are carefully manufactured under strict quality guidelines and in full compliance with ASTM. Only the highest-grade PVC materials are used offering you the best durability.
  • MEASUREMENTS: 3/4 Inch barbed Insert x 3/4 Inch barbed Insert x 3/4 Inch barbed Insert barbed tee. Pipe Fitting Class is Sch 40 with Max. Temp of 140 F. Max Pressure 200 psi @ 72 Degrees F. Tee Fitting Connection Type is Insert x Insert x Insert.
  • WIDE APPLICATION: PVC Barb Tee Fitting can be used for running water lines as flexible tube and hose fittings at home, RV or any commercial plumbing systems.
  • EASY TO INSTALL: PVC tee hose fittings are lightweight and require no professional knowledge. The fitting process is simple and effortless. PVC can be cut, shaped, welded and joined easily.
  • MADE IN USA: Our PVC hose connectors are produced in US and have clear environmental advantages over traditional materials - 100% recyclable with increased wear resistance.
Check Stock

Xtenzi Car Radio Antenna Adapter Kit XT3234 Compatible with GM, Kia, Hummer, Matrix, Isuzu, Chevrolet Select 86-08

  • Xtenzi antenna adapters Kit XT3234 ,For adding CD FM modulator,Barbed Antenna Adapter Kit,.
  • Compatible with select 88-06 GM vehicles equipped with barbed antenna connectors,.
  • Factory Radio with Flat Connector to Aftermarket Antenna.
  • Function and compatibility with 40-GM30, BAA3,BAA4.
  • Manufactured to the Highest Quality Available , Meets the standard of excellence..
Check Stock

JOYPRO 60 Pieces Drip Irrigation 1/4 Barbed Elbow Fittings Barbed Connectors for 1/4 Inch Irrigation Tubing Drip Line Elbow for Drip Sprinkler Garden Lawn Systems

  • 【PERFECT MATCH 1/4 INCH IRRIGATION TUBING】JOYPRO 1/4 inch irrigation elbow fittings can connect to most of the standard 1/4" drip irrigation tubing. (Note: Please check the size of tubing carefully before purchasing.).
  • 【MADE OF DURABLE PLASTIC MATERIAL】JORPRO drip line elbows are made of high quality engineering plastics, so our irrigation elbow connectors are durable, strong, water resistant, chemical-resistant and long-lasting than others..
  • 【EASY TO INSTALL】It is easy to install without any glue, tools or clamps. Directly insert this irrigation tubing elbow at the ends of the water pipe, the barbed ends can grab 1/4" tubing tightly for a secure leak-proof connection..
  • 【PACKAGE LIST】It comes with 60 pieces barbed elbow connectors, which let you connect your irrigation systems as you wish..
  • 【WIDE APPLICATION】These elbow fittings for 1/4 inch sprinkler hose is ideal for garden, flower bed, greenhouse, farm, lawn, patio and other agricultural watering system..
Check Stock

Fence Stretcher Splicer,Fence Wire Tighten Tools, Wire Fence Tightener, Iron Metal Barbed Wire Fence Fixer Stretcher Tool, Fence Barb Wire Repair Tool

  • tighten any fence such as high tensile, barbed wire, or smooth wire.
  • easy to use, ratchet action , easily swivel for left and right handed operation..
  • Heavy-duty Carbon Steel Structure，Strong Pulling Power.
  • If you have any problem about it, please feel free to contact us.
  • Fence Stretcher Splicer,Fence Wire Tighten Tools, Wire Fence Tightener, Iron Metal Barbed Wire Fence Fixer Stretcher Tool, Fence Barb Wire Repair Tool.
Check Stock

Gardrip 60 Pieces Drip Irrigation Elbow Fittings for 1/4 Inch Drip Tubing Barbed Elbow Corner 90 Connectors for Irrigation or Sprinkler Systems

  • 【Package Quantity】: Package includes 60 pieces of elbow hose connectors, which let you connect your irrigation systems as you wish.
  • 【Barbed Design】: The barbed ends grab tubing, which makes the tube connection more firm, and not easy to fall off, ensure a secure leak-proof connection..
  • 【Material】: The drip line elbows are made of high quality engineering plastics, solid and durable, ensure years of using..
  • 【Easy to Install】: It is easy to install without any glue, tools or clamps. Simply push the tubing firmly over the barbs for a very tight fit that won't leak..
  • 【Wide Application】: These elbow fittings are suitable for garden, lawn, greenhouse, patio and other watering drip irrigation system..
Check Stock

LitKiwi Draft Beer Line with Connectors,Part of Kegerator Kit,5 Feet-Clear Vinyl Tubing Hose 5/16'ID 7/16' with Stainless Steel Barb Fitting,for Beer Tap Tower Keg Homebrewing

  • ★【Great Marterial】^^The Fitting—made of 304 High quality stainless steel with Swivel Nuts and Clamps which is durable and portable.^^The Tube—made of Food grade Vinyl Line,soft and smooth, durable and anti-kinking, safe and non-toxic..
  • ★【General Size】^^The Fitting—Both are 5/16" barb and the threads both are 5/8" G.Fit for most of the draft beer accessories.^^The Tube—ID:5/16 inch,OD:7/16 inch,Length:5 feet or 10 feet,work with the barb fittings..
  • ★【Wide Application】The tube and fittings kit are ideal for general use such as beer brewing, kegerator, wine making.Can be used with most commercial barbed fittings and connectors.The Beer line gives your beer a reliable connection from the back of your shank right to the keg coupler..
  • ★【Easy & Efficient】This kit ensures a proper connection of your beer lines to your draft system. Installation is easy and can be done within minutes.And two worm clamps will guarantee no beer leaks..
  • ★【Package Include】5' Length of clear 5/16”inside diameter beer line & 1pcs straight fitting & 2pcs clamps..
Check Stock

LitKiwi Draft Beer Line with Connectors,Part of Kegerator Kit,10 Feet-Clear Vinyl Tubing Hose 5/16'ID 7/16' with Stainless Steel Barb Fitting,for Beer Tap Tower Keg Homebrewing

  • ★【Great Marterial】^^The Fitting—made of 304 High quality stainless steel with Swivel Nuts and Clamps which is durable and portable.^^The Tube—made of Food grade Vinyl Line,soft and smooth, durable and anti-kinking, safe and non-toxic..
  • ★【General Size】^^The Fitting—Both are 5/16" barb and the threads both are 5/8" G.Fit for most of the draft beer accessories.^^The Tube—ID:5/16 inch,OD:7/16 inch,Length:5 feet or 10 feet,work with the barb fittings..
  • ★【Wide Application】The tube and fittings kit are ideal for general use such as beer brewing, kegerator, wine making.Can be used with most commercial barbed fittings and connectors.The Beer line gives your beer a reliable connection from the back of your shank right to the keg coupler..
  • ★【Easy & Efficient】This kit ensures a proper connection of your beer lines to your draft system. Installation is easy and can be done within minutes.And two worm clamps will guarantee no beer leaks..
  • ★【Package Include】10' Length of clear 5/16”inside diameter beer line & 1pcs straight fitting & 2pcs clamps..
Check Stock

Seachoice 3-Way Y Fitting, Fits 3/4 in. ID Hose, Black Plastic

  • Perfect for plumbing hard-to-reach areas.
Check Stock