Reviews Barbed Hose Splicers

PVC Barbed Tee Fitting - 3/4 PVC Tee Barb Fitting - 3/4 Inch Barbed Insert Tee - Hose Barb Fittings for Tubing Hose Water Line - SCH 40 Barbed Hose Tee Fitting – Barbed Tee PVC Fitting

  • TOP QUALITY: The water line barbed fitting tees are carefully manufactured under strict quality guidelines and in full compliance with ASTM. Only the highest-grade PVC materials are used offering you the best durability.
  • MEASUREMENTS: 3/4 Inch barbed Insert x 3/4 Inch barbed Insert x 3/4 Inch barbed Insert barbed tee. Pipe Fitting Class is Sch 40 with Max. Temp of 140 F. Max Pressure 200 psi @ 72 Degrees F. Tee Fitting Connection Type is Insert x Insert x Insert.
  • WIDE APPLICATION: PVC Barb Tee Fitting can be used for running water lines as flexible tube and hose fittings at home, RV or any commercial plumbing systems.
  • EASY TO INSTALL: PVC tee hose fittings are lightweight and require no professional knowledge. The fitting process is simple and effortless. PVC can be cut, shaped, welded and joined easily.
  • MADE IN USA: Our PVC hose connectors are produced in US and have clear environmental advantages over traditional materials - 100% recyclable with increased wear resistance.
Check Stock

Little Giant SPDK Sump Pump Discharge Hose Kit, 1-1/4” Hose – 1-1/2” & 1-1/4” Adaptors, 24-Feet

  • SUMP PUMP HOSE: Sump Pump Discharge kit includes 1-1/4" and 1-1/2" NPT barbed adapters.
  • DISCHARGE HOSE: It is Ideal for discharging water out of a basement sump pit to a safe location outside of the home. Kit includes 24' corrugated polyethylene hose.
  • COMPATIBLE HOSE: It is compatible with sump pumps with 1-1/4 inch FNPT or 1-1/2 inch FNPT discharge. It includes ABS thread x barbed adapter and galvanized steel clamps. IT IS NOT COMPATIBLE WITH GARDEN HOSE FITTINGS.
  • WATER PUMP HOSE DIMENSION: The sump pump discharge hose kit is of opening size 20 x 17 x 5.5 inches.
Check Stock

Air Foot Pedal with 8' long Neoprene Hose & Pressure Switch Combo Set - For Drain Cleaning Machines

  • Fits Ridgid, Spartan, General, Electric Eel and many other Drain Cleaning Machines that use air as an actuator..
  • Package includes: 1 – air foot pedal with 8′ long neoprene air hose, 1 – Pressure Switch Assembly/Air Switch, and 1 – mini hose clamp..
  • Air Foot Pedal: 3/8″ x 8′ long semi-flexible neoprene air hose, Heavy-duty neck on the bulb with a fitted barbed hose fitting insert..
  • Air Switch: Two pole air switch with barbed hose end, 21A 125/250 VAC..
  • Riveted aluminum plate on the bottom of the foot pedal..
Check Stock

Dixon DCP2144B Brass Air Chief Industrial Interchange Quick-Connect Air Hose Fitting, Plug, 1/4\ Coupling x 3/8\ Hose ID Barbed

  • Air Chief industrial interchange quick connect coupler for connecting directly to a hose with barbed hose ID end for a greater hold on the hose.
  • 1/4" Air Chief industrial interchange quick connect plug with a 3/8 "ID barbed hose end.
  • Valveless construction allows flow when disconnected.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Interchanges with MIL-C-4109F/A-A-59439 specifications for quick-disconnect couplings for hoses and portable pneumatic tools, but not water or fluids, at maximum working pressures up to 232 psi (16 bar).
Check Stock

JoyTube 5 Pcs Hose Barb Fittings 3/8 Barb to 1/2 NPT Male Thread Brass Metals Adapter Connector with Hose Clamp

  • Brass barbed hose fitting is for connecting 3/8" barb hoses, NPT male end used to connect 1/2" NPT female pipes fitting..
  • Made of high quality solid brass, firm and durable, providing high resistance to abrasion and corrosion, low magnetic permeability, ductility at high temperatures, which can withstand up to -40 to +160 degrees F..
  • When used with a hose clamp or crimp sleeve or ferrule, the hose barb fitting can creates a better tight seal..
  • Brass barbed fitting kits can be used with PVC, PU, Rubber hose or tubing, Which can apply to water, gas, oil and fuel as well as air tools..
Check Stock

Brass 1/4 Barb X 1/4 NPT Male End Air Hose Pipe Fitting Threaded Connector Adapter Pack of 12

  • ✅ Function -- Barb head for connecting hoses, NPT end used to connect NPT pipes. Air hose pipe can apply to water, gas, oil and fuel as well as air tools..
  • ✅ Premium material -- Brass barbed hose fitting is made of high quality solid brass, firm and durable, providing high resistance to abrasion and corrosion. Solid brass hose barb can withstand up to 100 °C (212 °F)..
  • ✅ Durable -- Air hose fittings is not a cast product and has a thick wall, providing a longer service life than iron and iron galvanized pipe fittings..
  • ✅ Superior threads -- Deeper and smoother threads with barbed edges provide effective connection..
  • ✅ CUSTOMER SERVICE -- Professional factories produce brass air line fittings. Every detail reflects a strong texture performance. Fast Delivery and 30 Days Free Refund..
Check Stock

Northern Brewer - Silver Serpent Stainless Steel Immersion Wort Chiller

  • A simple tweak, adding barbed fittings and a drop-angle to our favorite immersion chiller, spawns a new best-in-class product. Introducing Silver....
  • Simply drop your clean chiller into the kettle a few minutes before the end of the boil and it will be ready to go..
  • Brew with peace of mind like never before. Drop-angle connections keep surprise leaks outside your kettle and away from cooling wort..
  • Standard garden hose connection allows for brewing outside or connects to a laundry sink faucet as your chilling water source..
  • Comes fully assembled with tubing, barbed fittings, and hose clamps..
Check Stock

uxcell PVC Barb Hose Fitting Connector Adapter 16mm or 5/8

  • APPLICATION.The adapter’s barbed fitting creates a tight seal on flexible PE pipe when used with a hose clamp (sold separately)..
  • ADVANTAGE.An O-ring is delivered to the end of each joint thread, eliminating the need for a sealant or raw tape.
  • HIGH QUALITY MATERIAL. made of PVC ,have Alkali resistance, high temperature resistance, corrosion resistance, strong anti-aging, high strength, no break..
  • -30 degree to 100 degree F temperature range..
  • BARB HOSE FITTING.has a male National Pipe Thread (G) thread on one end and a barbed insert on the other.
  • Size: 16mm or 5/8″ Barb x 3/4″ G Male.
Check Stock

60 Pieces Drip Irrigation 1/4 Barbed Tubing End Plugs,Barbed Connectors End Cap for Drip or Sprinkler Systems

  • 【Great Value】：Comes with 60 pieces barbed end plug fittings in total,enough to meet your daily use..
  • 【DURABLE MATERIAL】：Made of high-impact,UV-resistant and chemical-resistant materials,durable and reliable to assure a long life using time..
  • 【BARBED DESIGN】：drip irrigation plugs tight fits universal 1/4" drip tubing,barbed design ensures the tubing will not slip and leak..
  • 【EASY TO INSTALL】:barbed hose end plug is easy to be installed without glue, tools, or clamps.Push the tubing firmly over the end plug fitting.Warm tips:Put the tubing end into 75°~85° hot water 10 seconds before pushing them..
  • 【FOR WIDE APPLICATIONS】:closure goof hole plugs are Great for use with raised garden beds,lawn,greenhouse gardening and agricultural watering applications..
Check Stock

1/4'' Swivel Flare Nut x 3/8'' Barb

  • Brass for corrosion resistance,ductility at high temperatures,and low magnetic permeability..
  • Connections:Hose Barb x Hose Barb x Hose Barb,3/16"x3/8"x3/16".
  • T reducing barbed fitting has three openings for connecting your hoses..
Check Stock

Plastic Hose Barb Fitting Hose Fitting Adapter for Air Water Fuel 3/16 x 3/16 1/4 x 1/4 3/8 x 3/8 1/2 x 1/2 5/8 x 5/8 8Pcs

  • 【Package Included】 8 pieces Plastic barb connector in total, including 2pcs 3/16" x 3/16", 2pcs 1/2" x 1/2", 2pcs 5/8" x 5/8", 1pcs 1/4" x 1/4", 1pcs 3/8" x 3/8".
  • 【Material】 Barbed hose fittings made of 100% PP polypropylene plastic that is durable, strong, water resistant, chemical-resistant materials to assure long life.
  • 【Working Temperature & Pressure】 The plastic hose fittings temperature range from -9 °F to 175 °F, but hose splicer is not resistant to oil.
  • 【Easy Installation】 Barb hose easy to install without glue, or other tools required. Barbed ends grab 5/8" tubing tightly that won't leak.
  • If necessary, you can use a heat gun or blower to soften the end of the tube before inserting it, after cooling, the tube will remain tight.
  • 【Wide Application】 Pipe connectors Suitable for applications in pharmaceutical, food and beverage, laboratory, chemical processing and others.
Check Stock

2 Pack 1/2 barb Hose Home Brewing 304 Stainless Steel Female Quick Disconnect Mash Tun wort chiller Beer Brewing Connector brewing equipment 1/2 female barb

  • 【304 Stainless Steel 】 The FPT quick disconnect is made of top quality 304SS that will last a lifetime. The internal o-ring is food grade....
  • 【Quickly Switch Lines Between Equipment】 1/2 NPT thread quick disconnect can attach to any 1/2 male thread fitting（ball valve,wort chillers,beer....
  • 【Push-On Hose Fittings 】Firstly you need to push a lever on barbed quick disconnect .And then take the Female fitting into the barbed quick....
  • 【No Leaks】The barbed quick disconnect has a red silicone gasket inside.It will create liquid & gas tight seals between FPT fitting and the barbed....
  • 【Connection Made Easy】This quick disconnect set can take one hand to take on or off. Their parts fit together very well . The FPT quick disconnect....
Check Stock

Brass Hose Barb Reducer 1/4 to 3/8 Barb Hose ID Reducing Barb Brabed Fittings Splicer Mender Union Air Gas Water Fuel Line Heater Garden Pond Poly Tubing Adapter Pack of 2

  • ✔ 100% MONEY BACK GUARANTEE: Customer satisfaction is our utmost priority. If you are dissatisfied with Brass Hose Barb Reducer 3/8" x 1/4", drop us a message and we are certain to give you a full refund..
  • ✔ HIGH-QUALITY MATERIAL: Material is brass so you don’t have to worry about any damages because it’s corrosion resistance , ductility at high temperatures and low magnetic permeability.
  • ✔ USAGE APPLICATION: This is a really useful product for connecting a hose to a hose threaded connection of a different diameter. Designed for barbed to barbed, push-to-connect, dry connect. Used in patio, lawn garden hose connect, Irrigation, lawns, air compressors, automatic manufacturing operations, aircraft controls, and tire installation in industries including agriculture, mining, road construction, firefighting, and aviation.
  • ✔ ECONOMICAL: Compared to other types of fitting, this one is considered more economical with high value system component options..
  • ✔ EASY TO USE: This one is easy to install and require little maintenance..
Check Stock