Reviews Barbed Hose Fittings

PVC Barbed Tee Fitting - 3/4 PVC Tee Barb Fitting - 3/4 Inch Barbed Insert Tee - Hose Barb Fittings for Tubing Hose Water Line - SCH 40 Barbed Hose Tee Fitting – Barbed Tee PVC Fitting

  • TOP QUALITY: The water line barbed fitting tees are carefully manufactured under strict quality guidelines and in full compliance with ASTM. Only the highest-grade PVC materials are used offering you the best durability.
  • MEASUREMENTS: 3/4 Inch barbed Insert x 3/4 Inch barbed Insert x 3/4 Inch barbed Insert barbed tee. Pipe Fitting Class is Sch 40 with Max. Temp of 140 F. Max Pressure 200 psi @ 72 Degrees F. Tee Fitting Connection Type is Insert x Insert x Insert.
  • WIDE APPLICATION: PVC Barb Tee Fitting can be used for running water lines as flexible tube and hose fittings at home, RV or any commercial plumbing systems.
  • EASY TO INSTALL: PVC tee hose fittings are lightweight and require no professional knowledge. The fitting process is simple and effortless. PVC can be cut, shaped, welded and joined easily.
  • MADE IN USA: Our PVC hose connectors are produced in US and have clear environmental advantages over traditional materials - 100% recyclable with increased wear resistance.
Check Stock

Northern Brewer - Silver Serpent Stainless Steel Immersion Wort Chiller

  • A simple tweak, adding barbed fittings and a drop-angle to our favorite immersion chiller, spawns a new best-in-class product. Introducing Silver....
  • Simply drop your clean chiller into the kettle a few minutes before the end of the boil and it will be ready to go..
  • Brew with peace of mind like never before. Drop-angle connections keep surprise leaks outside your kettle and away from cooling wort..
  • Standard garden hose connection allows for brewing outside or connects to a laundry sink faucet as your chilling water source..
  • Comes fully assembled with tubing, barbed fittings, and hose clamps..
Check Stock

Little Giant SPDK Sump Pump Discharge Hose Kit, 1-1/4” Hose – 1-1/2” & 1-1/4” Adaptors, 24-Feet

  • SUMP PUMP HOSE: Sump Pump Discharge kit includes 1-1/4" and 1-1/2" NPT barbed adapters.
  • DISCHARGE HOSE: It is Ideal for discharging water out of a basement sump pit to a safe location outside of the home. Kit includes 24' corrugated polyethylene hose.
  • COMPATIBLE HOSE: It is compatible with sump pumps with 1-1/4 inch FNPT or 1-1/2 inch FNPT discharge. It includes ABS thread x barbed adapter and galvanized steel clamps. IT IS NOT COMPATIBLE WITH GARDEN HOSE FITTINGS.
  • WATER PUMP HOSE DIMENSION: The sump pump discharge hose kit is of opening size 20 x 17 x 5.5 inches.
Check Stock

Dixon Valve BPM2 Brass Fitting, Plug, 1/4\ Push-On Hose ID Mender

  • Push-on fittings are intended for use with Lok-On (push-on style) hose only.
  • Lok-On fittings will properly grip Lok-On hose only when pushed all the way in, with the cut end of the hose completely concealed by the plastic cap.
  • Size: 1/2" NPTF male x 1/2" hose ID barbed.
Check Stock

Plastic Hose Barb Fitting Hose Fitting Adapter for Air Water Fuel 3/16 x 3/16 1/4 x 1/4 3/8 x 3/8 1/2 x 1/2 5/8 x 5/8 8Pcs

  • 【Package Included】 8 pieces Plastic barb connector in total, including 2pcs 3/16" x 3/16", 2pcs 1/2" x 1/2", 2pcs 5/8" x 5/8", 1pcs 1/4" x 1/4", 1pcs 3/8" x 3/8".
  • 【Material】 Barbed hose fittings made of 100% PP polypropylene plastic that is durable, strong, water resistant, chemical-resistant materials to assure long life.
  • 【Working Temperature & Pressure】 The plastic hose fittings temperature range from -9 °F to 175 °F, but hose splicer is not resistant to oil.
  • 【Easy Installation】 Barb hose easy to install without glue, or other tools required. Barbed ends grab 5/8" tubing tightly that won't leak.
  • If necessary, you can use a heat gun or blower to soften the end of the tube before inserting it, after cooling, the tube will remain tight.
  • 【Wide Application】 Pipe connectors Suitable for applications in pharmaceutical, food and beverage, laboratory, chemical processing and others.
Check Stock

Anderson Metals - 57002-0604 Brass Hose Fitting, Connector, 3/8\ Barb x 1/4\ Female Pipe

  • Adapter for connecting pipes or fittings of different types.
  • Fitting connects to hose on one end and has an NPT female connector on the other.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Barbed fitting creates a tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule (sold separately).
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

Kalolary 150 Pieces 1/4’’ Straight Barbed Connectors Fitting Drip Irrigation Fitting Drip Irrigation Barbed Coupling Single Barbed Connector for Irrigation Tubing System and Garden

  • 【Package Includes】150 pieces of 1/4 inch irrigation straight coupling connectors are included in 1 set. Sufficient quantity to use or take as backup,they are practical fittings for tubing..
  • 【Fits 1/4 inch irrigation hose】This barbed coupling fittings connect two sections of any brand 1/4" drip irrigation tubing in a straight line. Two barbed ends makes the connection more strong and firm. Note:Please check the size carefully before purchasing..
  • 【Long-lasting】Made of high quality engineering plastics, durable, strong, water resistant, chemical-resistant materials to assure long life..
  • 【Easy to Insatll】Directly insert this irrigation coupling at the ends of the water pipe, there is no need of any glue or tools, making garden work more convenient and much easier. Tips: Heat the end of hose to help it slide on this coupling..
  • 【Wide range of applications:】This coupling fittings for 1/4 inch irrigation tubing helps to build a maintenance-free irrigation system, it is ideal to be applied for garden, greenhouse, flower bed, patio and other agricultural watering system..
Check Stock

Victor 0384-2101 Journeyman Edge 2.0 540/510, 90° Plus Outfit

  • Includes 2 barbed hose splicers and 4 hose ferrules.
  • Common USA torch inlet and regulator outlet connections.
  • Low pressure, less than 200 psig gas service.
  • Repair your 1/4-Inch hose in the field, (ferrule crimper not included).
Check Stock

SUNGATOR 3 Pack Barbed Brass Hose Fittings 1/2 Barb to 1/2 NPT Male Threaded End Fittings Hose Connector Adapter with Sealing Tape and Hose Clamps

  • 【SIZE AND PACKAGING】: 1/2"barb X 1/2"NPT male pipe, package includes 3 hose barb fittings, 1 sealing tape, 3 hose clamps.
  • 【DURABLE】: Made of High quality solid brass, not a cast product and has a thick wall, this hose barb fitting is firm and durable, and provides high resistance to abrasion and corrosion, longer service life than iron and iron galvanized pipe fittings.
  • 【SUPERIOR THREADS】: Deeper and smoother threads with barbed edges provide effective and tight connection, not easy to slip.
  • 【OPERATING TEMPERATURES】: Solid brass can withstand up to 100 °C (212 °F).
  • 【FUNCTION】: Barb head for connecting hoses, NPT male end used to connect NPT pipes, the hose barb fittings can apply to gas, oil and fuel as well as air tools.
Check Stock

Good Sealing Compression Ferrule Connector Tee Effective Sealing Tee Equal Diameter 316 for Natural Gas for Complicated Pipeline for Solar Energy(Ф3)

  • Simple push in design for connecting to the tube and provide secure connection, requires no extra sealing..
  • This straight connector has barbed ends to create a tight seal on a hose when used with a hose clamp or crimp sleeve or ferrule (not included)..
  • - Hose fittings connect, control, change the direction of, and terminate the flow in piping and hose systems..
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability..
  • Hose fittings are used in systems such as air compressors, automatic manufacturing operations, aircraft controls, and tire installation in industries including agriculture, mining, road construction, firefighting, and aviation..
Check Stock

SUNGATOR Brass Barbed Hose Fittings 1 Barb to 1 NPT Male Threaded End Hose Barb Pipe Fittings Hose Adapter Connector with Sealing Tape and Hose Clamps 2 Pack

  • 【SIZE AND PACKAGING】: 1"barb X 1"NPT male pipe, package includes 2 hose barb fittings, 1 sealing tape, 2 hose clamps.
  • 【DURABLE】: Made of High quality solid brass, not a cast product and has a thick wall, this hose barb fitting is firm and durable, and provides high resistance to abrasion and corrosion, longer service life than iron and iron galvanized pipe fittings.
  • 【SUPERIOR THREADS】: Deeper and smoother threads with barbed edges provide effective and tight connection, not easy to slip.
  • 【OPERATING TEMPERATURES】: Solid brass can withstand up to 100 °C (212 °F).
  • 【FUNCTION】: Barb head for connecting hoses, NPT male end used to connect NPT pipes, the hose barb fittings can apply to gas, oil and fuel.
Check Stock

50 Pcs Drip Irrigation Coupling Fittings 1/4 Drip Irrigation Tubing Straight Coupling/Single Barbed Connectors for Universal 1/4 Inch Irrigation Tubing

  • ✔【High Quality】: Made of high-impact, high-strength plastic material, Durable, strong, water resistant.
  • ✔【Fits 1/4 inch irrigation hose】: This irrigation straight coupling connectors connect two sections of any brand 1/4" drip irrigation tubing in a straight line. Two barbed ends makes the connection more strong and firm. Kindly Note:Please check the size carefully before purchasing..
  • ✔【Easy to Install】: This coupling fittings for 1/4 inch irrigation tubing is easy to be installed without glue, tools, or clamps. Push the tubing firmly over the tee fitting.Tips:Put the tubing end into 75°~80° hot water for 30 seconds before pushing them..
  • ✔【Wide Application】:This drip irrigation single barbed connector for 1/4 inch irrigation tubing helps to build a maintenance-free irrigation system, it is ideal to be applied for garden, greenhouse, flower bed, patio and other agricultural watering system..
  • ✔【 Package Included】: 50 pieces of 1/4 inch barbed straight coupling fittings connectors are included in..
Check Stock

Keg Disconnect Ball Lock MFL Ball Lock Fittings Keg Connectors – Keg Coupler Stainless Ball Lock Keg Fittings 12-Piece

  • ...TE BEVERAGES: Use the G. Francis Ball Lock Keg Fitting Ball Locks 12-Piece Ball Lock Quick Disconnect Set with Liquid & Gas Disconnects, Swivel Nuts, & Hose Clamps to ferment and dispense craft cocktails, soda, and other beverages from your existing keg.
  • USE YOUR KEG: Each of the ball lock keg connectors (fittings) have an approximate 2.2-inch height and 1.3-inch outside diameter (5.6cm x 3.3cm) and is compatible with ball lock Cornelius (Corny) kegs and keg couple adapters for homebrewing.
  • Hose clamps have 0.2-inch to 0.5-inch (6-12mm) diameter while the barbed swivel nuts have 5/16-inch outside diameter (OD) fitted for 1/4-inch or 3/16-inch inside diameter (ID) hoses on your 3, 5, or 10 gallon keg.
  • BUILT TO LAST: Keg ball lock quick disconnects and hose clamp wings constructed from ABS plastic that resists rust and corrosion.
  • Swivel nuts and clamps constructed from food-grade stainless steel for maximum strength and longevity.
  • INSTALL EASILY: Tighten the swivel nut connecting the flare fitting before use.
  • Ensure correct fittings are installed on input and output posts – Light gray disconnect for gas inlet and black disconnect for fluid outlet.
  • To install fittings, pull up lever on ball lock disconn....
Check Stock