Reviews Barbed Fitting

iMopo 70 Pack Drip Irrigation Universal 1/4 Barbed End Plug Fittings Barbed Connectors for Drip or Sprinkler System

  • 【Great Value】：Comes with 70 pieces barbed end plug fittings in total,enough to meet your daily use..
  • 【DURABLE MATERIAL】：Made of high-impact,UV-resistant and chemical-resistant materials,durable and reliable to assure a long life using time..
  • 【BARBED DESIGN】：Barbed end plug fittings tight fits universal 1/4" drip tubing,barbed design ensures the tubing will not slip and leak..
  • 【EASY TO INSTALL】:Barbed end plug fitting is easy to be installed without glue, tools, or clamps.Push the tubing firmly over the end plug fitting.Warm tips:Put the tubing end into 75°~85° hot water 10 seconds before pushing them..
  • 【FOR WIDE APPLICATIONS】:Barbed end plug fittings are Great for use with raised garden beds,lawn,greenhouse gardening and agricultural watering applications..
Check Stock

2 Pack 1/2 barb Hose Home Brewing 304 Stainless Steel Female Quick Disconnect Mash Tun wort chiller Beer Brewing Connector brewing equipment 1/2 female barb

  • 【304 Stainless Steel 】 The FPT quick disconnect is made of top quality 304SS that will last a lifetime. The internal o-ring is food grade....
  • 【Quickly Switch Lines Between Equipment】 1/2 NPT thread quick disconnect can attach to any 1/2 male thread fitting（ball valve,wort chillers,beer....
  • 【Push-On Hose Fittings 】Firstly you need to push a lever on barbed quick disconnect .And then take the Female fitting into the barbed quick....
  • 【No Leaks】The barbed quick disconnect has a red silicone gasket inside.It will create liquid & gas tight seals between FPT fitting and the barbed....
  • 【Connection Made Easy】This quick disconnect set can take one hand to take on or off. Their parts fit together very well . The FPT quick disconnect....
Check Stock

Mudder 100 Pieces 1/4 Inch Straight Barbed Connectors Fitting Drip Irrigation Barbed Coupling Single Barbed Connector for Irrigation Tubing System and Garden

  • Wide range of applications: drip irrigation single barbed connector works well in connecting 2 sections of 1/4 inch mm tubing to direct water to another location, which can be applied for drip irrigation tubing system, flower beds, vegetable gardens, herbs gardens.
  • How to install: just easily install the barbed coupling fitting by push the tubing firmly over the barbed part for a tight fit, not easy to fall off, which has strong holding power with barbed ends, making the connection more firm.
  • No need for glues or tools: after fully inserting straight barbed connectors at the ends of the water pipe, you don't have to use any glue, tools, or clamps to fix the drippers or nozzles, garden work can be much easier and more relaxing.
  • Long term to use: made of quality plastic, this drip irrigation barbed coupling is water and rust resistant, not easy to fade or deform, sturdy and durable to use, which can work as practical fitting for your drip irrigation tubing system for a long time.
  • Sufficient quantity: 1 package comes with 100 pieces of 1/4 inch single barbed connectors, sufficient quantity to use or take as backup, sharing some with close people in your life will also be nice, they are practical fittings for tubing.
Check Stock

Raindrip 63100UB Professional Hole Punch

  • Punch holes in supply tubing for easier insertion of ¼ in. barbed fittings and emitters with ¼ in. barbed inserts.
  • Works anywhere along the length of supply tubing where you want to insert a micro fitting or dripper.
  • The Hole Punch Tool punches a hole in supply tubing to insert fittings to connect tubing or drippers with barbed inserts.
  • Holds ½ in., 5/8 in., and 0.710 in. supply tubing to punch holes to fit ¼ in. barbed fittings and emitters with ¼ in. barbed inserts.
  • Use with ½ in., 5/8 in., or 0.710 in. Supply Tubing to punch holes.
  • Hand-held tool is designed with a comfortable pistol grip for strain-free use.
  • Metal hole punch tip penetrates tubing wall when handgrip is pressed.
  • Sliding shelf on tubing rest slides out to accommodate larger sized tubing.
  • Comes with one Pistol Grip Hole Punch Tool.
Check Stock

FERRODAY Stainless Steel Quick Disconnect Set 1/2 NPT Female Disconnect 1/2 Barb Brewing Quick Disconnect For Wort Pumps for Wort Chiller Connectors for Ball Valve Hose Fitting & O-rings

  • 【304 Stainless Steel 】 The FPT quick disconnect is made of top quality 304SS that will last a lifetime. The internal o-ring is food grade....
  • 【Quickly Switch Lines Between Equipment】 1/2 NPT thread quick disconnect can attach to any 1/2 male thread fitting（ball valve, wort chillers,....
  • 【Push-On Hose Fittings 】Firstly you need to pull up the collar on the barbed quick disconnect, then put the Female fitting into the barbed quick....
  • 【No Leaks】The barbed quick disconnect has a red silicone gasket inside. It will create a tight seal for liquid & gas between FPT fitting and the....
  • 【Connection Easily】This quick disconnect set allows one hand operation of take on/ take off. All parts fit together very well . The FPT quick....
Check Stock

JoyTube 5 Pcs Hose Barb Fittings 3/8 Barb to 1/2 NPT Male Thread Brass Metals Adapter Connector with Hose Clamp

  • Brass barbed hose fitting is for connecting 3/8" barb hoses, NPT male end used to connect 1/2" NPT female pipes fitting..
  • Made of high quality solid brass, firm and durable, providing high resistance to abrasion and corrosion, low magnetic permeability, ductility at high temperatures, which can withstand up to -40 to +160 degrees F..
  • When used with a hose clamp or crimp sleeve or ferrule, the hose barb fitting can creates a better tight seal..
  • Brass barbed fitting kits can be used with PVC, PU, Rubber hose or tubing, Which can apply to water, gas, oil and fuel as well as air tools..
Check Stock

Well water pump 12 V / 24 V DC solar water pump with solar cell alternative energy 70 m

  • Design: 3-Chamber Positive Displacement Diaphragm Pump.
  • Inlet Screen: 50 Micron Stainless Steel Inlet Screen.
  • Dimensions L x W x H (in.): 4.09" x 4.09"....
  • Material: High Strength Engineered Plastic.
  • Quick disconnect with "Watertight-Gland" Design Pat Pend.
  • Internal Bypass: 105-110 PSI Max. (7.2-7.5 BARS).
  • Outlet Port: 1/2" (12.7mm) Barbed Fitting.
Check Stock

uxcell PVC Barb Hose Fitting Connector Adapter 16mm or 5/8

  • APPLICATION.The adapter’s barbed fitting creates a tight seal on flexible PE pipe when used with a hose clamp (sold separately)..
  • ADVANTAGE.An O-ring is delivered to the end of each joint thread, eliminating the need for a sealant or raw tape.
  • HIGH QUALITY MATERIAL. made of PVC ,have Alkali resistance, high temperature resistance, corrosion resistance, strong anti-aging, high strength, no break..
  • -30 degree to 100 degree F temperature range..
  • BARB HOSE FITTING.has a male National Pipe Thread (G) thread on one end and a barbed insert on the other.
  • Size: 16mm or 5/8″ Barb x 3/4″ G Male.
Check Stock

60 Pieces Drip Irrigation 1/4 Barbed Tubing End Plugs,Barbed Connectors End Cap for Drip or Sprinkler Systems

  • 【Great Value】：Comes with 60 pieces barbed end plug fittings in total,enough to meet your daily use..
  • 【DURABLE MATERIAL】：Made of high-impact,UV-resistant and chemical-resistant materials,durable and reliable to assure a long life using time..
  • 【BARBED DESIGN】：drip irrigation plugs tight fits universal 1/4" drip tubing,barbed design ensures the tubing will not slip and leak..
  • 【EASY TO INSTALL】:barbed hose end plug is easy to be installed without glue, tools, or clamps.Push the tubing firmly over the end plug fitting.Warm tips:Put the tubing end into 75°~85° hot water 10 seconds before pushing them..
  • 【FOR WIDE APPLICATIONS】:closure goof hole plugs are Great for use with raised garden beds,lawn,greenhouse gardening and agricultural watering applications..
Check Stock

RV Plumbing Fitting 1/2 Swivel to 1/2 Barb | Barb Straight Wingnut Swivel Adapter 2-Pack

  • This barb fitting is a 1/2” fitting. NSF certified and durable, it is safe for water and meant to last..
  • Connecting the strainer to the PEX or pressurized tubing, this barbed fitting is not one to ignore. If you’re wanting your water system to work as best as it can, you’ll need all of the pieces and parts that make that happen..
  • The black connector and clear barb fitting fit in well with the rest of your water system, creating a smooth connection..
Check Stock

Mars 11917

  • Panel-mounted, barbed fitting allows tube connection on the side of a barrier.
  • Fitting connects to tubing on one end and a female connector on the other.
  • Acetal copolymer plastic for low moisture absorption and high tensile and flexural strength.
  • Buna-N O-ring elastomer seal for long cycle life and repeatable, leak-free connection.
  • Single-barb for increased pull-off resistance compared to three-barb styles.
Check Stock

Hamilton 35032 Barbed Fitting for Manual Plug Valves, 1.5mm Port Diameter, HV, HVD or HVP

  • Barbed fitting for Hamilton HV, HVD, or HVP manual plug valve (sold separately).
Check Stock

Thogus Nylon Tube Fitting, Tee, White, 5/8\ Barbed (Pack of 10)

  • Nylon for strength, flexibility, and resistance to abrasion, crushing, and cracking.
  • 200 series barbed fitting creates a secure seal with flexible tubing in high-pressure applications.
  • Meets standards set by RoHS for hazardous materials.
Check Stock