Reviews Bar Hole Tool

YG-1 P15202 Spade Drill Straight Shank Holder, Straight Flute, 0.318\ Shank Diameter, 31/32\-1-3/8\ Drill Insert Range

  • ☞This product is the main accessory of coordinate boring machine, horizontal boring machine, ordinary boring and milling machine, boring and milling CNC machine tools. It can be used for boring, boring outer circle, boring end face, boring stepped hole, boring inner hole end face, cutting inner hole and ring groove on outer circle, etc..
  • ☞Precise control and free adjustment: The scale of the dial is clear, and the circle is divided into 100 equal parts. The movement of each scale is 0.005mm, the diameter is 0.01mm, and the operation is simple..
  • ☞Select material with high hardness. Using 40CrMo material, it has strong rigidity, special surface treatment, high hardness, good seismic performance, suitable for high speed, and guarantees the density of hole processing..
  • ☞The boring range of the complete set of boring tools: 10-150mm, and the diameter of the boring tool bar is 50mm. Precision fine-tuning: 0.01mm (one revolution of 0.02mm), adjustable stroke 20mm. The boring bar easily and directly enters the boring head hole..
  • ☞The refined boring bar is made of alloy steel, which has strength and toughness, good hardenability, and no obvious temper brittleness. After quenching and tempering, it has obvious impact resistance. The taper design of the b....
Check Stock

Gerber Barbill Wallet - Silver [30-001571]

  • 8-in-1 multi tool: Pry bar, nail puller, wire stripper, small flat head screwdriver, large flathead driver, bottle opener, standard utility blade, cord cut notch and lanyard hole.
  • Utility knife uses full sized replaceable utility blades with locking feature to protect when not in use.
  • Dual ended design with pry bar and pocket knife to cut through rope or twine.
  • Compact and slim multi tool fits great in a pocket or tool box. Makes a perfect companion for any work job site and for the around the house projects.
  • Overall length 4.25 inches, weight: 4.2 ounces.
Check Stock

Dibble Bar with Foot Pedal, Stainless Steel Pole T-Handle Tree Planting Bar Tool, Long Dibble Planting Tool Transplanting Spade Flat

  • ...forestry. If you want to plant a lot of bare root seedlings, the dibble will be the best tool for you..
  • EFFICIENT DIGGING BAR FOR TREE SEEDLING PLANTING: First you need to step the dibble down wiggle back and forth, withdraw, then drop the saplings in the wedge shaped hole, at last, you can fill the soil. The tool can penetrate soil cleanly and easily, allowing less dirt to fall in the planting hole..
  • DETACHABLE & EASY TO INSTALL: The dibble tree planting bar tool is detachable, which makes it portable and convenient to carry for outdoor use. It is super easy to install. Put the foot pedal on the rod and connect the rods with attached accessories and tools. Please note that maybe you need some strength to connect these rods. Tight connectors will keep the tool from shaking in use..
Check Stock

Portable Excavator 33cc 2 Stroke Planting Shovel Garden Tree Digger Machine Handheld Digger Digging Machine, Post Hole Digger for Garden Farm and Home

  • ...forestry. If you want to plant a lot of bare root seedlings, the dibble will be the best tool for you..
  • EFFICIENT DIGGING BAR FOR TREE SEEDLING PLANTING: First you need to step the dibble down wiggle back and forth, withdraw, then drop the saplings in the wedge shaped hole, at last, you can fill the soil. The tool can penetrate soil cleanly and easily, allowing less dirt to fall in the planting hole..
  • DETACHABLE & EASY TO INSTALL: The dibble tree planting bar tool is detachable, which makes it portable and convenient to carry for outdoor use. It is super easy to install. Put the foot pedal on the rod and connect the rods with attached accessories and tools. Please note that maybe you need some strength to connect these rods. Tight connectors will keep the tool from shaking in use..
Check Stock

OSCARBIDE 1/2 Round Shank 4 Pieces/Set Boring Bar Set,90 Degree with Indexable Carbide Inserts TCMT21.51 TCMT110204

  • OSCARBIDE Boring Bar Set ,1-1/4”to 2-1/2”Boring Depth ,7/16” to 1/2”Min Bore ,1-3/4” to 4” Overall length,Bar holders are made of high quality steel with coated, inserts with Tin-coated are made of carbide,for moistureproof, rust-proof,for long time use.
  • Allow the operator to set positve or negative rake,chip breaker eliminates long stringer chips.
  • Carbide Inserts can be indexed, when it is dull use another sided,It is not necessary to remove tool from chuck or tool post.
  • Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • Replacement insert for this kit ,please search the Asin of this item: B07Q2HNGVF to buy it.
Check Stock

ABN Power Punch Heavy Duty Hole Punch Set – Metal Hole Punch, Heavy Duty Hole Puncher Hand Punch 3/32in to 9/32in

  • PUNCH HOLES IN YOUR PROJECT: The ABN Hole Punch Tool is a heavy duty punch and dies kit that has a high-leverage design and comfortable grips that allow you to manually create clean holes through sheet metals up to US 16 gauge.
  • For mild sheet steel, aluminum, brass, polyurethane, plastic, canvas, cardboard, paper, shoe.
  • Additionally use as a leather punch, belt hole puncher, metal hole punch for jewelry, and watch hole puncher.
  • Not recommended for stainless steel such as silverware and utensils.
  • PERFECT SIZE: Creates holes that are from 3/32-inch to 9/32-inch in diameter and includes a stop gauge for consistent spacing.
  • 7 sizes of punches and dies include 3/32-inch (2mm), 1/8-inch (3mm), 5/32-inch (4mm), 3/16-inch (4.5mm), 7/32-inch (5.5mm), 1/4-inch (6mm), 9/32-inch (7mm).
  • 1.75-inch (4.4cm) throat depth to punch holes as close as 1.75 inches away from material edge.
  • EASY TO USE: This sheet metal punch uses interchangeable heads to pierce holes in a material of your choosing.
  • Select a proper size punch and die, remove nut near handle using die adjustment tool, move connection bar, place punch on the head of hand punch, rotate nut by again using the adjustment tool to adjust caliper, and set distance between the edge and the hole.
Check Stock

2 Stroke 52cc Gas Powered Excavator Tree Sapling Planting Shovel Drilling Machine Air-Cooled Single Cylinder Hand-held Garden Shovels Tree Digger Digging Machine (US Stock)

  • ...forestry. If you want to plant a lot of bare root seedlings, the dibble will be the best tool for you..
  • EFFICIENT DIGGING BAR FOR TREE SEEDLING PLANTING: First you need to step the dibble down wiggle back and forth, withdraw, then drop the saplings in the wedge shaped hole, at last, you can fill the soil. The tool can penetrate soil cleanly and easily, allowing less dirt to fall in the planting hole..
  • DETACHABLE & EASY TO INSTALL: The dibble tree planting bar tool is detachable, which makes it portable and convenient to carry for outdoor use. It is super easy to install. Put the foot pedal on the rod and connect the rods with attached accessories and tools. Please note that maybe you need some strength to connect these rods. Tight connectors will keep the tool from shaking in use..
Check Stock

Metal Magery Stainless Steel Hawthorne Strainer 4-Prong Cocktail Bar Strainer Pack of 3

  • ...Steel: Forged from Durable Stainless Steel, these bar strainers are built to withstand years of use. Naturally resistant to rust and corrosion so cleaning this bartending strainer is very easy as well..
  • Hawthorne Strainer: Perfect for recipes with fresh ingredients, this strainer's tightly wound coils and perforated holes keep ice and other large ingredients out of your guests' drinks, promising a smooth, refreshing cocktail every time. Whether you're creating a crisp martini or a warm, classic old-fashioned, this bar staple is the perfect tool for the perfect drink!.
  • Cocktail Strainer: Adding to the benefits of this bar utensil, the four-prong design makes this strainer easy to balance on the rim of your glass or cocktail shaker, lessening the chance for slips or spills and ensuring a clean, professional product every time! When not in use, a convenient hole in the handle can be used to store it up off the bar and out of the way, while still ensuring it is within close reach..
  • Dimensions: 5.75" Long | Material: Stainless Steel | Quantity: 3.
Check Stock

KINGLAKE Beekeepers Polished Stainless Steel Hive Scraper Tool Beekeeping Equipment Tool Silver

  • Hive tool is the "must have" tool for the beekeeper..
  • Made of stainless steel material will not bend easily..
  • Color:sillver Length:10 inch ,buy with confidence..
  • A very useful beekeeping equipment tool with a hanging hole..
  • The hive tool is a mini crow bar that is used to pry apart hive bodies and supers..
Check Stock

Complete Coconut Opener and Scraper Tool Set | Coconut Easy Hammer Kit Removal Tool and Coconut Knife Opener for Fresh Young and Thai Coconuts | Easily Break Open Coconuts and Scoop the Meat

  • Effective Mallet and Coconut Opener Tool: This extra-large coconut round opening tool with hammer makes it so simple to pop a hole right into the....
  • The Coconut Removal Knife: Simply use the mallet as a breaker tool, then rotate this curved knife inside the husk to spoon out large chunks of meat....
  • Top of the Line Craftsmanship: Each tool is crafted with high quality materials, made to last. Use this coconut breaker and remover tool kit for....
  • Purchase this all-in-one coconut tool pack for your kitchen or bar and plan your tropical party.
Check Stock

EDC Titanium Pry Bar Pocket Pry Bar Multifunction Pry Tool with Pocket Clip

  • [High-quality material]: Titanium pry bar is made of TC4 titanium alloy with precision processing, which has the characteristics of high strength and corrosion resistance, strong and durable..
  • [Specifications]: The pocket EDC pry bar weight is 1.76 ounces, the length is 4.92 inches, the width is 0.57 inches, and the thickness is 0.29 inches..
  • [Good workmanship]: The edc pry tool is cut from the whole piece of titanium alloy by tight processing. The chamfer is rounded, which is safe and convenient to use..
  • [Multi-function]: The main functions of this EDC pry tool include a pry bar, a flat-blade screwdriver and a box opener. With a screwdriver bit insertion slot, it can be matched with screwdriver bits of different specifications..
  • [Portable]: The titanium pry bar has a pocket clip and a lanyard hole for easy carrying. The pocket clip is detachable and can be removed or installed as needed..
Check Stock

OSCARBIDE 3/4 Shank 8 Pieces/Set Indexable Boring Bars,90 Degree Round Shank Boring Bars with Indexable Carbide Inserts 4 Pieces TCMT21.51 & 4 Pieces TCMT221

  • OSCARBIDE Boring Bar Set ,Bar holders are made of high quality steel with coated, inserts with Tin-coated are made of carbide,for moistureproof, rust-proof,for long time use.
  • Round shanks allow the operator to set positve or negative rake,chip breaker eliminates long stringer chips.
  • Carbide Inserts can be indexed, when it is dull use another sided,It is not necessary to remove tool from chuck or tool post.
  • Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • Replacement insert for this kit ,please search the Asin of item: B07Q2HNGVF & B07R6M1F3H.
Check Stock

4PCS Blacksmith Anvil Hardy Tool Set 1 inch - Creasing Stake Tool, Hot Cut Tool, Bottom Fuller &Turning Bending Scrolling Fork

  • 【APPLICATION】-- This Blacksmith Anvil Forge Hardy Tool Set fits in a 1 inch Hardy hole in a anvil or can be used in a vise.Square shanks fit the square hole in the anvil and prevent rotation..
  • 【Turning Bending Scrolling Fork】This is a really handy tool for making S hooks or other basic turning/scrolling shapes. This tool allows you to get leverage for bending metal by hand, with a hammer, or with a bending wrench..
  • 【Bottom Fuller Tool】Bottom fuller hardy tools are used in the anvil or clamped in a vise to form metal. Use a hammer to work from the top, while the hardy tool works from the bottom. This gives you different anvil surfaces and edges to work with..
  • 【Creasing Stake Tool】Two piece of bar stock weld it together on a stand. This is used for doing creases in metal. You can put the metal on the tool and use a chisel to drop the metal down into the slot..
  • 【Hot Cut Tool】This plate stands straight up with a Hand Forged, hardened and Sharpened edge along the top. To place orange/red hot steel over edge and strike with hammer. Cuts through hot steel pretty quick..
Check Stock