Reviews Banjo Nipple Fittings- BestItemr.com

OBPFY 4 Set 12mm & 14mm Diameter Banjo Hose Barb Bolt Fittings,Metric Thread Banjo Bolt Brake Fitting Adapter with Copper Washers for Motorcycle Car

【Excellent Fittings】* 2 In 1 Set，12mm & 14mm Banjo Barb Bolt Fittings,Designed for excellent engine system fittings.Each component is precision-machined to exact tolerances for trouble-free performance. Long lasting durability,easy installation..
【Application】* Works for Banjo Bolt Inter Diameter 12mm / 14mm. Suitable for Brake System， Air and Fuel Delivery ，Engine..
【14mm Banjo Fittings & Bolt】* Banjo Internal Diameter: 14mm / 0.55".
【12mm Banjo Fittings & Bolt】* Banjo Internal Diameter : 12mm / 0.47".
【Package】* 2 Sets 12mm Banjo Hose Barb Bolt Fittings + 2 Sets 14mm Banjo Hose Barb Bolt Fittings(with 4 X M14 copper spacer + 4 X M12 copper spacer).

70"/175mm Hydraulic Brake Oil Line ATV Quad Go Kart Scooter Cable Hose With 10mm Banjo Ends.
70" long --from top to end ,10mm banjo nut fittings.
Made with high quality heavy duty braided stainless steel.
Hydraulic Brake Master Cylinder Hose Line Pipeline.

Includes the fittings and gauge needed to check fuel pressure fuel volume and fuel restrictions from the delivery pump to the injection pump.
Kit includes special quick-disconnect banjo fitting two fuel injection quick-coupler adapters quick-disconnect banjo fitting gauge assembly and fuel volume test adapter.
Also includes a diesel fuel inlet restriction test adapter for 1988-98 Dodge pickups and vans with 5.9L 12-valve and 1998-1/2-newer 5.9L 24-valve Cummins diesel engines.

Reducer Adapter: Premium solid brass with thicker wall, more durable than iron and iron galvanized pipe fittings, 1/4" NPT male pipe x 3/8" NPT female....
Reducing Hex Nipple: Reducing hex nipple for connecting two threaded pipes with different diameters. Male National Pipe Taper (NPT) threads for....
Hex Bushing: Has a 3/8” male NPT threaded on one end and a 1/4” female NPT threaded on the other for connecting a female and a male pipe or....
These fittings are not allowed to be installed for potable water,NPT thread size does not actual diameter, it is only nominal pipe size..

Long nipple for connecting two threaded pipes and extending pipe length.
1/8" Male National Pipe Taper (NPT) threads for connecting to 1/8" female threaded pipes.
Legines pipe fittings are made of CA360 or CA377 brass, not ordinary copper alloy, and meet SAE standard, have dryseal threads, forgings & extruded..
Operating pressure of our fittings is up to 1200psi, more higher than other general fittings. Temperatures range from -53 to 121 degrees C (-65 to 250 degrees F).
These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..

Feature a one-piece aluminum backing plate/carb support bracket.
Eliminate the need for banjo Fittings, Hoses and filter.
Breather passages exit at the mouth of the carburetor/throttle body, creating a virtually closed-loop system.
Stage I kit Includes a high-flow filter and accepts 93-15 oval or round OEM outer cover (unless noted).
Stage II kit Includes a 20% larger high-flow filter and accepts an 8" round ness or 8" round OEM outer cover.

【Size】1/2" Male x 1/2" Male Thread. Tapered thread. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of pipe..
【High Quality Material &Threads】Made of quality stainless steel 304, durable and sturdy corrosion resistance, ductility at high temperatures, and low magnetic permeability. High quality and deep threads allow the fittings to bite better, tight threads, not easy to slip..
【Hex Nipple】The hex nipple fitting is a short length of pipe with threaded ends for connecting threaded pipes, and it has a hexagonal section in the middle for an increased bearing surface when adjusting the fitting with a wrench..
【Operating temperature range】Temperature rating: -65 to 250 degrees F.
【Widely Applications】Male threads for connecting to female threaded pipes, this premium pipe fitting can be used to connect various pipes, such as air pipe, fuel pipe, water pipe as well as air tools.
it can also be used with grease, fuels, LP and natural gas, refrigeration, instrumentation and hydraulic systems in low and medium pressure pipe line connections..

Wastegate provide a means to control the boost pressure of the turbo charged engine..
High Strength Cast Steel Body,Fits any 38mm V-Band Wastegate Port.
Anodized Aluminum Top Finish Weldable Flange V-Band Flange for Dump Pipe.
Stainless Steel V-Band Flanges and Sealing Rings.
Barbed / Banjo Fittings,14 PSI Spring Included.

The Practical Banjo Chord Chart of Banjo Learning System, Fantastic Banjo Chart Fit for All 5 Strings Acoustic Banjo and Electric Banjo.
Each Key Starts Out Showing You How to Play The Banjo Chords of Major, Minor, Dominant 6th, Dominant 7th, Minor 7th, Diminished, Augmented of Banjo Chords.
Contain Banjo 1st to 18th Banjo Fret Notes, The Circle of Fifths, Great Learning Tool for Beginning & Intermediate Banjo Players.
1mm Thickness 8 x 11 Inch Suitable for Most Music Folders and Suitable for Sheet Music Stand, You Can also Put it in Banjo Bag, Take it to a Place with Musical Inspiration.
Great Banjo Chart for Banjo Beginners Adult or Kid, Help Yourself to Learn Banjo or Teach Banjo Music Theory.

Features a one-piece aluminum backing plate/carb support bracket with patented hidden Breather technology and radius air inlet.
Eliminates the need for banjo Fittings, Hoses and filter.
Breather passages exit at the mouth of the carburetor/throttle body, creating a virtually closed-loop system.
Kit Includes high-performance filter, backing plate and Steel outer cover.
All necessary hardware and instructions are included with each kit.