Reviews Ball Joint Washers

WPW10254672 W10254672 Dishwasher Faucet Adapter Compatible With Whirlpool

  • 1.【Snap-on coupling】Dishwasher adapter will connect your portable dishwasher to the sink faucet. It has full water flow capacity that you will need for a dishwasher..
  • 2.【Ball Joint and 360-Degree Swivel】Unique ball joint design makes it swivel in 360-degree and you could swivel it per your need. The adapter is constructed of durable brass to withstand the rigors of everyday use..
  • 3.【Faucet Aerator Function】Without connect with dishwasher, it becomes a faucet aerator with bubble stream function. Aerated stream that saves up to 30% water consumption without sacrificing water force..
  • 4.【Both outside and inside threads】Bottom side is snap-on dishwasher adapter and Top side is faucet adapter with 15/16-27Male outside thread and 55/64-27Female inside thread..
  • 5.【Easy to install】 The dishwasher adapter offers a snap connection to make installation easier. It has a classic look and will match your existing kitchen decor. Rubber Washers included..
Check Stock

Slate River Camera Arm with T-Handle Extension

  • The t handle has a cork screw tip and cnc threads, it starts easily and pulls itself into the tree.
  • The t handle provides a very solid mount minimizing up and down movement of your camera,.
  • Nylon washers at each joint provide a smooth and quite positioning of your camera.
  • Swivel ball rotates 360 degrees and tilts 45 degrees up and down, maximizing camera positions.
  • Depending on the diameter of the tree, the camera arm can rotate up to 270 degrees on the t handle.
Check Stock

OEMTOOLS 25105 Extra Large Ball Joint Press, Heavy Duty Ball Joint Removal Tool, Extended C Frame For Use With Toyota, Chevrolet, Dodge, Ford

  • Extra Large C Frame Press: Essential ball joint tool kit staple for removing press fit parts from pick up trucks.
  • Specialized C clamp makes truck ball joint removal simple.
  • Truck Ball Joint Separator: Ball joint puller tool made for pick up trucks.
  • For use with Toyota Tacoma and Tundra, Chevrolet 2500-3500 and Tahoe, Dodge Ram 2500-3500, and Ford F350-F550.
  • Rugged Frame Strength: Build a stronger master ball joint service kit with this heavy duty forged steel C frame.
  • This extra large ball joint press even removes seized joints.
  • Extended Applications: This heavy duty ball and U joint removal tool features an extended C frame.
  • Compatible with larger ball joint adapters that standard C frame presses won’t fit.
  • Use with Compatible Adaptors: Universal ball joint press does not include ball joint adaptors.
  • Use with OEMTOOLS 37310, 25104, 27023, or 27089 adapters.
Check Stock

Traxxas Stampede 2wd XL-5 VXL MAGNUM 272 GRAY CASE TRANSMISSION w/ STEEL GEARS

  • Make sure this fits. by entering your model number..
  • Magnum 272 Transmission - Gray The Magnum 272 Transmission is assembled with all metal gear internals riding on ultra-smooth sealed ball bearings. Combined with the smooth 48-pitch gears (not included), power is delivered quietly to the telescoping U-joint driveshafts (not included). The sealed gearbox protects the transmission components from dirt and rocks. Includes Gray Transmission Gearbox Halves (Part # 3691A) Input Slipper Shaft (Part # 3793) Six (6) 5x11x4 Ball Bearings.
  • Includes: Gearbox Halves w/Idler Gear Shaft - Gray (Part # 3691A) Input/Slipper Shaft w/ Spring Pin (Part # 3793) 2 Ball Bearings - 5x11x4mm (Part # 5116 x 3) 20 Fiber Washers - 5x8mm (Part # 1985) Planetary Gear Differential & Steel Ring Gear (Part # 2388X) 22T Top Steel Drive Gear (Part # 3195) Steel Idler Gear - 30T (Part # 3696) 6 Button Head Machine Screws - 3x23mm Hex Drive (Part # 2591) 6 Button Head Machine Screws - 3x20mm Hex Drive (Part # 2580) 6 Flat Head Hex Dri.
  • Part number(s) included (in factory packaging): 3691A 3793 5116 1985 2388X 3195 3696 2591 2580 3931.
Check Stock

OEMTOOLS 27308 Ball Joint Separator Adjusts from 1-1/8 Inches to 2-1/8 Inches Fits Common Ball Joint Sizes Steel Separator Mechanism with Black Oxide Pins

  • FITS MOST PASSENGER VEHICLES: Our ball joint separator tool separates ball joints from the spindle arm on domestic and import front wheel drive....
  • EASY TO USE: The ball joint removal tool works with a 3/4-inch socket and grease for quick and easy removal of ball joints.
  • HEAVY DUTY BALL JOINT REMOVER: This ball joint removal kit features a strong steel construction and pins with black oxide coating for all the strength....
  • CONVENIENT STORAGE: Our ball joint kit comes in a sturdy blow mold carrying case for safe keeping and easy portability.
  • FULL SPECIFICATIONS: Adjustable for different ball joint sizes.
  • Max. opening range: 1-1/8 inches to 2-1/8 inch.
Check Stock

Sleepyheads (Classic Board Books)

  • Dual shower heads: Brushed Nickel Body + Grey Face shower heads with handheld spray, fixed shower head with two spray settings. NO shower arm included in the packaging.
  • EASY TOOL-FREE CONNECTION: No need to call a plumber - installs in minutes with just three hand-tighten connections. Fits any standard shower arm.
  • Durable and flexible 5 ft stainless steel shower hose in beautiful brushed nickel finishing, anti twist conical nut connecting with the handheld shower head.
  • Heat resistant solid full body ABS construction which comes with solid ABS Mount with Brass Ball joint.
  • Rain shower heads combo is packaged in strong box, perfect as a gift to friends. Package includes: 1*Rain shower head, 1*Handheld shower, 1*60 Inches stainless steel shower hose, 1*Teflon thread seal tape. Please note Washers are pre-assembled.
Check Stock

TOMMARS 3 pc Ball Joint Puller Set Ball Joint Separator and Tie Rod Puller for Front End Service

  • For removal of most types of pitman arms, tie rods and ball joints found on automotive and light truck applications..
  • Press type ball joint separator allows for ball joint removal without damage to joint and other parts..
  • Adjustable Ball Joint Separator-Press Type:Jaw Depth:1.18''- 1.96'' (30 - 50mm), Jaw Opening : 0.78''- 0.86''(20-22 mm)..
  • Ball Joint Splitter: 0.78''(20mm)Jaw opening adjustable up to 1.96'' (50mm). Conical Pitman Arm Puller: Jaw Opening: 0.7''(18mm)..
  • ATTENTION:Please measure your ball joint of size before purchasing, and check the specifications of the Ball Joint Separator, whether it is suitable....
Check Stock

Belleville Washers Conical Disc Spring Cup Washers 18-8 Stainless Steel 1/2 Qty 25

  • Also referred to as Belleville Washers, Disc Springs, Spring Washers, Conical Washers, Cupped Spring Washers, or Conical Spring Washers.
  • Used to apply a flexible pre-load to a bolted joint or bearing - Can be used in a stack below the bolt head to apply a greater pre-load.
  • Corrosion resistant 18-8 stainless steel.
  • Variety of uses including vibration reduction and pressure indicators.
  • Commonly used in automotive applications, aerospace, vehicles and general machinery.
Check Stock

Belleville Washers Conical Disc Spring Cup Washers 18-8 Stainless Steel 3/8 Qty 250

  • Also referred to as Belleville Washers, Disc Springs, Spring Washers, Conical Washers, Cupped Spring Washers, or Conical Spring Washers.
  • Used to apply a flexible pre-load to a bolted joint or bearing - Can be used in a stack below the bolt head to apply a greater pre-load.
  • Corrosion resistant 18-8 stainless steel.
  • Variety of uses including vibration reduction and pressure indicators.
  • Commonly used in automotive applications, aerospace, vehicles and general machinery.
Check Stock

Belleville Washers Conical Disc Spring Cup Washers 18-8 Stainless Steel 3/8 Qty 100

  • Also referred to as Belleville Washers, Disc Springs, Spring Washers, Conical Washers, Cupped Spring Washers, or Conical Spring Washers.
  • Used to apply a flexible pre-load to a bolted joint or bearing - Can be used in a stack below the bolt head to apply a greater pre-load.
  • Corrosion resistant 18-8 stainless steel.
  • Variety of uses including vibration reduction and pressure indicators.
  • Commonly used in automotive applications, aerospace, vehicles and general machinery.
Check Stock

Belleville Washers Conical Disc Spring Cup Washers 18-8 Stainless Steel 5/8 Qty 25

  • Also referred to as Belleville Washers, Disc Springs, Spring Washers, Conical Washers, Cupped Spring Washers, or Conical Spring Washers.
  • Used to apply a flexible pre-load to a bolted joint or bearing - Can be used in a stack below the bolt head to apply a greater pre-load.
  • Corrosion resistant 18-8 stainless steel.
  • Variety of uses including vibration reduction and pressure indicators.
  • Commonly used in automotive applications, aerospace, vehicles and general machinery.
Check Stock

OEMTOOLS 25104 21 Piece Master Ball Joint Press Kit Installs and Removes Ball Joints U-Joints and Brake Anchor Pins Designed for 2WD and 4WD Vehicles

  • BALL JOINT REMOVAL KIT: Our ball joint tool kit installs and removes press-fit upper and lower ball joints on 2-wheel drive and 4-wheel drive....
  • WORKS WITH VARIOUS MODELS: This ball joint puller tool includes adapters for removing upper and lower ball joints on GM, Ford, and Chrysler 2-wheel....
  • MANEUVERS AROUND OBJECTS: The adapters in this ball joint remover kit feature specialized cut-outs that are designed to fit or maneuver around....
  • HEAVY DUTY BALL JOINT PRESS: Our ball joint separator kit has a C-frame that is constructed with a durable steel alloy for the toughest ball press....
  • CONVENIENT STORAGE: This ball joint kit comes in a sturdy blow-molded case for secure storage in your garage or auto shop until you need it.
Check Stock

ABN Extra Large Ball Joint Press Kit Wheel Bearing Press Kit - Universal Ball Joint Separator Tool and Removal Adapters

  • [Easily Service Your Vehicle]: Keep your suspension system running smoothly by replacing worn or rusted ball joints with the ABN Ball Joint Removal Tool Set.
  • Use as ball joint puller kit, control arm bushing tools, U joint press kit, or tie rod and track pin press set.
  • [Fits Your Project]: Ball joint press kit heavy duty 4x4 U joint removal tool kit fits most 2 and 4 wheel-drive domestic and imported cars, pickup trucks, and SUVs with press-fit type ball joints.
  • Ball joint compressor control arm bushing press kit may even fit your tractor.
  • [Built To Last]: Professional-grade forged steel provides maximum strength and durability while the black oxide finish resists elemental damage and wear.
  • Ball joint kit will endure years of heavy use.
  • [Contents]: 11.5-inch (29.2cm) tall extra large ball joint press tool C-frame has 2 interchangeable pressure screws and a 3.5-inch (8.9cm) pressure screw head adapter.
  • Two 3-inch (7.6cm) wide stepped automotive press adapters fit the 10 and 6.5-inch (25.4 and 16.5cm) pressure screws.
  • [Convenient Storage]: 14.5 by 10.3-inch (36.8 x 26.2cm) plastic bl....
Check Stock