Reviews Ball Joint Extractor
8629 Wheel Hub Removal Tool & 6007 Lower Control Arm Prying Tool & Brake Caliper Hooks
- The wishbone extractor tool is for pushing down the wishbone and other suspension parts for example during the disassembly of the drive shaft or during the replacement or exchange of the wheel bearing..
- After loosening the ball joint the wishbone must in most cases be pushed down against the bush or stabiliser tension in order to pull the joint from the support..
- The joint wedges again in the cone after it was pressed down only briefly with a tyre lever.
- The ball joint or gaiter gets damaged, the mechanic injures himself or damages suspension parts when the tyre lever slips away..
- With this lever tool the work can be accomplished safely and comfortably by one person (no mauling on your own making it safe and simple to use)..
Check StockFreeTec Ball Joint Remover/Puller/Separator Tool Tie Rod End Separator Remover Puller 20-30mm
- Enable operator to select correct jaw size without taking entire extractor to the vehicle.
Check Stock
OEMTOOLS 25105 Extra Large Ball Joint Press, Heavy Duty Ball Joint Removal Tool, Extended C Frame For Use With Toyota, Chevrolet, Dodge, Ford
- Extra Large C Frame Press: Essential ball joint tool kit staple for removing press fit parts from pick up trucks.
- Specialized C clamp makes truck ball joint removal simple.
- Truck Ball Joint Separator: Ball joint puller tool made for pick up trucks.
- For use with Toyota Tacoma and Tundra, Chevrolet 2500-3500 and Tahoe, Dodge Ram 2500-3500, and Ford F350-F550.
- Rugged Frame Strength: Build a stronger master ball joint service kit with this heavy duty forged steel C frame.
- This extra large ball joint press even removes seized joints.
- Extended Applications: This heavy duty ball and U joint removal tool features an extended C frame.
- Compatible with larger ball joint adapters that standard C frame presses won’t fit.
- Use with Compatible Adaptors: Universal ball joint press does not include ball joint adaptors.
- Use with OEMTOOLS 37310, 25104, 27023, or 27089 adapters.
Check StockOEMTOOLS 27308 Ball Joint Separator Adjusts from 1-1/8 Inches to 2-1/8 Inches Fits Common Ball Joint Sizes Steel Separator Mechanism with Black Oxide Pins
- FITS MOST PASSENGER VEHICLES: Our ball joint separator tool separates ball joints from the spindle arm on domestic and import front wheel drive....
- EASY TO USE: The ball joint removal tool works with a 3/4-inch socket and grease for quick and easy removal of ball joints.
- HEAVY DUTY BALL JOINT REMOVER: This ball joint removal kit features a strong steel construction and pins with black oxide coating for all the strength....
- CONVENIENT STORAGE: Our ball joint kit comes in a sturdy blow mold carrying case for safe keeping and easy portability.
- FULL SPECIFICATIONS: Adjustable for different ball joint sizes.
- Max. opening range: 1-1/8 inches to 2-1/8 inch.
Check StockTOMMARS 3 pc Ball Joint Puller Set Ball Joint Separator and Tie Rod Puller for Front End Service
- For removal of most types of pitman arms, tie rods and ball joints found on automotive and light truck applications..
- Press type ball joint separator allows for ball joint removal without damage to joint and other parts..
- Adjustable Ball Joint Separator-Press Type:Jaw Depth:1.18''- 1.96'' (30 - 50mm), Jaw Opening : 0.78''- 0.86''(20-22 mm)..
- Ball Joint Splitter: 0.78''(20mm)Jaw opening adjustable up to 1.96'' (50mm). Conical Pitman Arm Puller: Jaw Opening: 0.7''(18mm)..
- ATTENTION:Please measure your ball joint of size before purchasing, and check the specifications of the Ball Joint Separator, whether it is suitable....
Check StockOEMTOOLS 25104 21 Piece Master Ball Joint Press Kit Installs and Removes Ball Joints U-Joints and Brake Anchor Pins Designed for 2WD and 4WD Vehicles
- BALL JOINT REMOVAL KIT: Our ball joint tool kit installs and removes press-fit upper and lower ball joints on 2-wheel drive and 4-wheel drive....
- WORKS WITH VARIOUS MODELS: This ball joint puller tool includes adapters for removing upper and lower ball joints on GM, Ford, and Chrysler 2-wheel....
- MANEUVERS AROUND OBJECTS: The adapters in this ball joint remover kit feature specialized cut-outs that are designed to fit or maneuver around....
- HEAVY DUTY BALL JOINT PRESS: Our ball joint separator kit has a C-frame that is constructed with a durable steel alloy for the toughest ball press....
- CONVENIENT STORAGE: This ball joint kit comes in a sturdy blow-molded case for secure storage in your garage or auto shop until you need it.
Check Stock
ABN Extra Large Ball Joint Press Kit Wheel Bearing Press Kit - Universal Ball Joint Separator Tool and Removal Adapters
- [Easily Service Your Vehicle]: Keep your suspension system running smoothly by replacing worn or rusted ball joints with the ABN Ball Joint Removal Tool Set.
- Use as ball joint puller kit, control arm bushing tools, U joint press kit, or tie rod and track pin press set.
- [Fits Your Project]: Ball joint press kit heavy duty 4x4 U joint removal tool kit fits most 2 and 4 wheel-drive domestic and imported cars, pickup trucks, and SUVs with press-fit type ball joints.
- Ball joint compressor control arm bushing press kit may even fit your tractor.
- [Built To Last]: Professional-grade forged steel provides maximum strength and durability while the black oxide finish resists elemental damage and wear.
- Ball joint kit will endure years of heavy use.
- [Contents]: 11.5-inch (29.2cm) tall extra large ball joint press tool C-frame has 2 interchangeable pressure screws and a 3.5-inch (8.9cm) pressure screw head adapter.
- Two 3-inch (7.6cm) wide stepped automotive press adapters fit the 10 and 6.5-inch (25.4 and 16.5cm) pressure screws.
- [Convenient Storage]: 14.5 by 10.3-inch (36.8 x 26.2cm) plastic bl....
Check Stock
UYECOVE 15Pcs Bolt Extractor Set, Stripped Broken Screw Easy Out Bolt Extractor Set for Removing Lug Nuts, Damaged, Frozen, Rusted, Rounded-Off Bolts, Nuts & Screws.
- ★ Diverse Sizes – 15 pieces nuts or bolts extractor set. Included 13 pcs nut extractors: 1/4″, 5/16″(8mm), 3/8″, 10mm, 7/16″(11mm), 12mm, 1/2″, 13mm, 9/16″(14mm), 5/8″(16mm), 17mm, 11/16″, 3/4″(19mm).1 Pcs 1/4″ extractor extension(6.5cm) and 1 Pcs Extractor Rod(9cm). Which you can do the work with more flexibility and ease..
- ★ Durability: Made of high hardness Cr-Mo (chrome-molybdenum) steel, providing excellent durability and long life, corrosion resistance, and not easily damaged. The peeled bolt extractor is clearly laser etched for easy identification and use..
- ★ Professional Sleeve Spiral Design: With six contact points and internal reverse spiral. The spiral pattern design can provide sufficient gripping force to facilitate removal. The more you rotate, the tighter the sleeve clips. No more slippage, no joint breakage..
- ★ Easy to Removal: The easy out bolt extractor set for lug nut, bolts, nuts & screws parts tools. It will allow you to easily remove damaged, peeled, rusted, rounded-off, or frozen all types of fasteners. Well worth having!.
- ★ Warranty Service – Professional quality and offer two-year warranty. Each product is fully tested for accuracy before shipment. We are so confident about our high-quality....
Check StockOEMTOOLS 37089 Ball Joint and U Joint Press Set Forged Steel U Joint Removal Tool Ball Joint Separator Rust-Resistant Coated Ball Joint Removal Tool
- RELIABLE BALL JOINT PRESS KIT: Don’t let removing and installing ball joints be complicated.
- Remove ball joints quickly and easily with our ball....
- VERSTAILE BALL JOINT PRESS: Maintain the health of your suspension system.
- Our ball joint tool kit works on U joints, brake anchor pins, and more.
- DURABLE DIY TOOL: Get a ball joint puller kit that pays for itself.
- Easy to use, our ball joints press kit is excellent for saving on the expense of....
- PRACTICAL JOINT PRESS: Remove and install ball and U joints with ball joint puller set's selection of adapters.
- EFFECTIVE PRESS KIT: Don’t rely on makeshift methods and lesser C-clamps to do a heavy duty job.
- Our ball joints kit system is the best way to....
Check Stock
YSTOOL Front End Service Tool Set with Automotive Ball Joint Separator Tie Rod End Puller Pitman Arm Remover 5 PCS Removal Splitter Kit for Car SUV Light Truck Pickup
- ...th high-strength and deformation resistance features, can stand high intensity extrusion. The stout forcing bolts surface adopts black oxidation treatment to prevent rust, grease the bolts up before using for smooth operation and protect the bolt thread, grease them up after using for better preservation..
- This ball joint puller kit includes 1x ball joint separator, 1x tie rod end and ball joint remover, 1x conical pitman arm puller, 1x pitman arm and tie rod end puller, 1x pitman arm puller, and all the 5 tools are organized in a red blow molding case for easy storage and transportation. The 5PCS remove tools use C-shape, jaw shape and teardrop shape design, very simple, but can seat on the ball joint position tightly and provide very effective grip to fix the pullers..
- According to your ball joint choose the compatible puller, insert the puller into the ball joint opening, aim the bolt at the ball joint, turn the bolt by using the right size ratchet wrench, squeeze the ball joint out. These ball joint pullers can easily remove the stubborn ball joint, pitman arm, idler arm, tie rod end, steering linkages and steering boxes on front suspension and steering system, and will not damage boot/sleeve and other parts..
Check Stock
DASBET 4 in1 Ball Joint Service Auto Tool Kit 2WD & 4WD Car Repair Remover Installer
- Function: The ball joint press removal tool with four wheel drive adapter allows easy removal of crimped parts including ball joints, universal joints, brake fixing pins, etc. You don't need to remove the control arm from the vehicle at all during operation, improving work efficiency..
- Durable Structure: The ball point press kit is made of heavy forged steel with black oxide finish adapters.The ball joint service auto tool kit has great strength and service life, while rust and corrosion resistant.And the ball joint separator tool can withstand long-term and massive use..
- Easy to Operate: The ball joint service auto tool kit is ideal for removing/installing vehicle parts. You can remove all lock ring retainers from the brake anchor pins, then place the C-frame press on the brake spider, and tighten the forcing screws until the mounting pins are removed. .
- Wide Compatibility: The ball joint press & U joint removal tool kit is suitable for most two wheel drive (2WD) and four whee....
Check StockOEMTOOLS 25112 Ball Joint Separator for Cars, Trucks, and SUVs, Ball Joint Removal Tool, Adjustable Ball Joint Puller Extends Up to 2 3/8 Inches
- For Cars, Trucks, and SUVs: Efficiently separates the ball joint from the spindle support arm on most newer domestic and import front wheel drive vehicles, including trucks and SUVs.
- Extended Range: In order to fit the variety of vehicles this near universal tool can service, it adjusts up to 2 3/8 inches for various ball joints.
- Designed With Care: This ball joint splitter tool carries less risk of damaging the boot than a pickle fork joint remover and a hammer.
- Low Profile: Give yourself plenty of room to work.
- This ball joint separator is designed to access tight access where most ball joint separators won’t fit.
- Easy to Use: This ball joint removing tool is designed to be the easiest means to replace top of the line ball joints.
- Simply twist the removable nut until the joint pops out.
Check Stock
DPTOOL Ball Joint Separator Kit Heavy Duty Control Arms Steering Knuckles Tie Rod Ends Remover Tool 22mm 24mm 27mm 31mm 36mm Compatible with BMW/Benz/Land Rover
- Application: Compatible with BMW E38, E39, E52, E60, E61, E70, E83, E90, E91, E92, R50, R52, R53, RR1, RR2, X5. compatible with Mercedes W211, W219, W220, and W230. Compatible with Porsche 996 Carrera. Compatible with Audi A4, A6 lower suspension ball joint.
- Efficient Removal Ball Joint: Specially for quick and easy removing the ball joint connections, removal of tie rod ends, steering knuckles, and lower control arms to replace a ball joint. If you are doing any type of suspension work, this is a essential too. It makes separating ball joints as easy as a snap.
- Not Damage Ball Joint Boot : Use this tool instead of the pickle fork. This tool is quieter, takes less effort, and most important of all, it does not damage the ball join boot. A must have if you are working on the suspension and have to separate the ball joint but are not planning on replacing it.
- Easy To Use: lubricated the threads on this separator and applied turns slowly to the driver screw. the ball joint will violently popped out of the steering knuckle.
Check Stock
