Reviews Balanced Xlr Recorder
Tascam Model 16 All-In-One Mixing Studio
- 16-Track multi-track recorder (WAV, up to 48kHz/24-bit) to SD, SDHC and SDXC cards (Class 10 or higher required).
- Punch in/out capability (up to 8 tracks simultaneously).
- Built-in USB Audio Interface to send/receive (16-in/14-out) audio data to/from DAW.
- 14 inputs (10 monaural XLR/TRS balanced and 2 stereo-paired TRS balanced).
- 10 mic pre-amps utilizing Tascam Ultra-HDDA mic pre-amp technology (Ch 1 thru 8).
Check StockTISINO 3.5mm to XLR Cable Unbalanced Mini Jack 1/8 inch to XLR Male Adapter Microphone Cord - 3.3ft/1m
- Unbalanced 3.5mm(1/8 inch) to XLR Cable connects a Cell phone, MP3 player, tablet, laptop, voice recorder, or any 3.5mm audio output to a mixing console or powered speakers.
- Connect a smartphone with a headphone jack to XLR input.
- Connect a tablet using an instrument App into a mixing console for a performance. (Note: it is used for aux out to xlr in, can not run this cable from an xlr out to a mic in).
- This XLR male to 3.5mm cable combines the left and right stereo signal from a source with 3.5mm stereo output to a single mono feed, This is an Unbalanced cable, the L and R channels are soldered together making a mono signal to XLR Pin 2, the XLR Pin 1 and Pin 3 are shorted to ground, it is not suitable for most "balanced" applications.(Please See Diagram).
- XLR male connector has molded strain relief to support the weight of the cable.
- 24k Gold-plated 3.5mm TRS connector has 360 degree easy-grip treads for frequent unplugging and durability, the step-down design of the 3.5mm connector provides connection to recessed ports..
- 20 AWG 4N OFC Wire, High Density Shielding and Al-foil Shielded to Prevent EMI/RFI Interference ensuring the highest quality audio transfer without static, or popping..
- Heavy Duty Flexible Soft Rubber Jacket provided maximum flexibili....
Check StockShure A85F Transformer; Low Z, Female XLR to High Z 1/4-Inch Phone Plug
- Low- to high-impedance microphone-matching transformer.
- It has balanced female XLR and unbalanced high impedance male 1/4" phone plug connectors.
- Used to connect a balanced low-impedance microphone output to an unbalanced high impedance input on a mixer or recorder..
Check StockTISINO 3.5mm to XLR Cable Unbalanced Mini Jack 1/8 inch to XLR Male Adapter Microphone Cord - 1.6ft/50cm
- Unbalanced 3.5mm(1/8 inch) to XLR Cable connects a Cell phone, MP3 player, tablet, laptop, voice recorder, or any 3.5mm audio output to a mixing console or powered speakers.
- Connect a smartphone with a headphone jack to XLR input.
- Connect a tablet using an instrument App into a mixing console for a performance. (Note: it is used for aux out to xlr in, can not run this cable from an xlr out to a mic in).
- This XLR male to 3.5mm cable combines the left and right stereo signal from a source with 3.5mm stereo output to a single mono feed, This is an Unbalanced cable, the L and R channels are soldered together making a mono signal to XLR Pin 2, the XLR Pin 1 and Pin 3 are shorted to ground, it is not suitable for most "balanced" applications.(Please See Diagram).
- XLR male connector has molded strain relief to support the weight of the cable.
- 24k Gold-plated 3.5mm TRS connector has 360 degree easy-grip treads for frequent unplugging and durability, the step-down design of the 3.5mm connector provides connection to recessed ports..
- 20 AWG 4N OFC Wire, High Density Shielding and Al-foil Shielded to Prevent EMI/RFI Interference ensuring the highest quality audio transfer without static, or popping..
- Heavy Duty Flexible Soft Rubber Jacket provided maximum flexibili....
Check StockTascam DP-03SD 8-Track Digital Portastudio Bundle with Knox Gear Closed-Back Studio Monitor Headphones, XLR Cable (25 Ft.), 1/4\ TRS Cable, & Male-to-Male RCA Cable (5 Items)
- Bundle Includes: Tascam DP-03SD 8-Track Digital Portastudio, Knox Gear TX-100 Closed-Back Studio Monitor Headphones, Hosa HSS-005 Pro Balanced Interconnect REAN 1/4-inch to 1/4-inch TRS Cable, Focus Camera by Kirlin 25-Feet XLR Male to XLR Female Microphone Cable and Monoprice 12-Feet Male to Male RCA Audio Cable.
- Features: The 8-track digital recorder captures your music at CD quality to affordable SD/SDHC cards, and a 4GB card is included with the recorder. With built-in microphones, effects, and mastering, the DP-03SD provides everything musicians need to record and share their music.
- User Friendly Interface: The DP-03SD has a simple body that enjoys intuitive operation similar to a cassette MTR but being able to perform 8-track recording with 2-channel simultaneous input. The XLR terminal supports condenser microphones while the TRS phone terminals enable guitar and keyboard connections. As such, various instruments that are typically used during a band recording session are supported.
- Professionally Mastered Audio: Each track is equipped with level faders, pan knobs, and a controller for sending in-built reverb effects. Independent EQ-specific knobs enable users perform a mix down intuitively. Utilizing mastering effects will result in the creation....
Check StockTASCAM DR-100mkIII 2-Channel Portable Digital Recorder
- Tascam DR-70D Recorder + Pro Headphone + Pair EMB XLR Cables + Gravity Phone Holder Bundle.
- Compact case with tripod mounts designed for use with cameras.
- Four XLR microphone inputs with phantom power.
- Mic preamps feature 64dB of gain with individual controls per channel.
Check StockZoom H6 All Black Six Track Portable Recorder Podcasting Bundle with Zoom Dynamic Mic + Headphones + Accessories
- ... a wider perspective. Just twist the capsules to their premarked positions to switch between the two configurations..
- SIX CHANNELS OF MICROPHONE/LINE INPUTS: Equipped with four XLR-1/4" combo inputs and a 3.5mm stereo mini-jack input (on the X/Y capsule), the H6 All Black can accommodate condenser microphones, +4 dB balanced line-level sources, or signals from unbalanced instruments with active electronics. Turn on 12, 24, or 48 VDC phantom power to the XLR jacks, or 2.5V plug-in power to the mini jack. Whether you plan on recording studio condenser mics, feeds from wireless receivers, or a lavalier and shotgun.
- POWERED VIA AA BATTERIES OR AC ADAPTER: Power the H6 All Black via four included AA batteries, or plug it into a wall outlet with an AD-17 AC adapter (available separately). Alkaline batteries can keep the H6 running for over 20 hours of continuous 16-bit / 44.1 kHz recording using the X/Y mic capsule, or for over 9 hours of nonstop 24-bit / 96 kHz recording using the X/Y mic and the four XLR-1/4" inputs..
Check StockCable Matters Dual RCA to XLR Unbalanced Interconnect Cable 10 ft, 2 RCA to XLR Male Cable (Dual XLR to RCA Cable) - 10 Feet
- Balanced to unbalanced cable converts an unbalanced dual RCA output to balanced XLR input.
- Dual XLR male to dual RCA male connects an AV receiver with RCA line output to a power amplifier with XLR balanced inputs.
- Unbalanced XLR cable is wired with XLR pin 2 connected to the RCA plug tip.
- XLR pins 1 and 3 are connected to the shield of the RCA plug.
- Connect this balanced to unbalanced converter cable from equipment with a dual RCA phono output to a subwoofer with XLR input.
- Shielded RCA to XLR converter with oxygen-free copper (OFC) conductors and braided shielding provides maximum cancellation of hum and noise of an unbalanced audio signal.
- A lifetime warranty is included with this Shielded XLR cable for peace of mind when purchasing.
- Robust construction of this XLR to RCA adapter includes a flexible PVC jacket with gold-plated connectors.
- Shielded XLR male connectors have molded strain relief to support the weight of the cable.
- RCA connectors have easy-grip treads with a split blade housing for a secure connection.
- XLR female input compatible with a subwoofer with XLR input such as the Mackie Subwoofer.
- XLR to RCA adaptor connects to an audio mixer such as the Behringer Mixer.
- Instantly connect a DJ Controller with an RCA phono jack to speakers with XL....
Check StockTascam SD-20M 4-Track Solid-State Recorder - With 2 Pack 5' 8mm XLR Microphone 3 Pin XLR Male to 3 Pin XLR Female Cable
- lascam SD-20M 4-Track Solid-State Recorder - AC Adapter - Rack-Mount Screw Kit - Instruction Manual - Tascam 1 Year Limited Warranty - 2 Pack 5' 8mm XLR Microphone Cable 3 Pin XLR Male to 3 Pin XLR Female.
- XLR/TSR combo microphone inputs on the front panel.
- Four-track recorder capable of simultaneously recording from both the mic inputs and line inputs.
- Dual recording function captures a copy of your audio at a lower level, for a distortion-proof safety track.
- Can record a copy of the audio at a lower level according to the set audio recording level. This allows for a backup recording in case of distortion from unexpected loud noises.
Check StockBlucoil Audio 2-Pack of 20-FT Balanced XLR Cable with 24 AWG Copper Wire and PVC Jacket - 3-Pin Male to Female Microphone Cord for Audio Interfaces Mixers Preamps and Recorders
- MINIMIZES SOUND DISTORTION - The 2-Pack 20-foot Blucoil Balanced XLR Cables feature 92% shielding that makes sure the audio signal coming from your....
- EFFICIENTLY TRANSFERS SIGNALS - The 24 AWG (American Wire Gauge) oxygen-free stranded copper inner core delivers the best possible conductivity,....
- PROVIDES LONG-LASTING DURABILITY - The male-to-female connectors are made with high-quality, Neutrik-equivalent Zinc Alloy materials cast with rugged....
- OFFERS FLEXIBLE CONNECTIVITY - You can virtually connect any 3-pin microphone to an audio interface, mixer, preamp, or recorder via Blucoil Audio....
- COMPATIBLE MICS - The Blucoil XLR Cable is compatible with popular microphones that feature a 3-pin connector such as Audio Technica, MXL, Samson and....
Check StockDISINO 1/4 Inch TRS to XLR Male Balanced Signal Interconnect Cable Quarter inch to XLR Patch Cable - 3.3 Feet
- This Balanced XLR Cable is designed to convert a balanced 1/4" TRS output to a balanced XLR input. These cables are commonly used as speaker leads for active speakers, carrying the audio signal from the mixer to the speaker. They are also widely used as signal cables for stage and studio audio applications..
- High strength aluminum alloy die-cast housing, Gold plated connections, 20 AWG Oxygen-free copper core to deliver pristine sound..
- Constructed with multi-layers of shielding minimize signal interference and ensure the transmission stable,provides maximum cancellation of hum and noise..
- The XLR connector is a high quality metal shielded type with positive locking into the microphone.
- The heavy duty 6.35mm TRS connector has 360 degree easy-grip treads for frequent unplugging and durability..
- XLR pin 1 is connected to the 1/4" plug sleeve, XLR pin 2 is connected to the 1/4" plug tip, XLR pin 3 is connected to the 1/4" plug ring, balanced audio cables utilize impedance balanced lines that reduce EM and RF noise and extend the effective range of the cable run..
Check StockPeavey VSX 48e DSP-based Loudspeaker Management System
- 4 XLR balanced inputs and 8 XLR balanced outputs VSXe 48.
- Maximum input and output level +20 dBu, XLR balanced inputs and outputs.
- Frequency response 20 Hz to 20 kHz +0, -1 dB.
- 5 segment LED meters with limit indication on each output.
Check StockMovo LV4-O2 XLR Phantom Power Omnidirectional Lavalier Microphone Set, with Lapel Mic Clips and Windscreens - Perfect Lapel Microphone for Video Recording, Podcast, Interview, YouTube Production
- PRO AUDIO FOR CREATORS: These lavalier lapel microphones will bring superior audio capture to your next film or video shoot, livestream, or vlog.
- XLR CONNECTIONS: Easily connect via the attached 6 ft XLR cable to any mixing board, recorder, or wireless receiver that supports 48V phantom power. No batteries necessary.
- OMNIDIRECTIONAL PICKUP: Omnidirectional pickup pattern captures clear audio from all direction while reducing unwanted noise, making this a perfect body mic for cameras, live performance and streaming.
- PRODUCTION READY: With two lav mics, mic clips and detachable windscreen included, you’ll be ready to capture pristine, balanced audio for any project.
- 1-YEAR WARRANTY: We’ve got your back. Our products are designed to ease your technical woes, not add to them. Our friendly US-Based support is here to help.
Check Stock