Reviews Balanced Output

Topping A90 Headphone Amplifier 4.4mm XLR Desktop HiFi Full Balanced Amplifier Pre-Amplifier Black

  • Full balanced + SE headphone output---A90 has three output headphone jacks of 4-pin-XLR，4.4 balanced and 6.35 SE to meet different usages..
  • A90 is provided with a wide range of adaptation to headphones.---The SE 25Vpp / balanced 49Vpp high output voltage along with high output current & less than 0.1 Ohm output impedance,.
  • A90 is equipped with three gain settings of -9.5dB/ 0dB / 9.5dB for SE and -35dB / 6.0dB / 15.5dB for balanced. The noise of merely 0. 2uVrms makes A90 easily adapt to all types of headphones from extremely sensitive IEMs to most power demanding full sized over-ears..
  • It's a great companion of active monitors stacked with D90 DAC when A90 work as pre-amp application..
Check Stock

Peavey VSX 48e DSP-based Loudspeaker Management System

  • 4 XLR balanced inputs and 8 XLR balanced outputs VSXe 48.
  • Maximum input and output level +20 dBu, XLR balanced inputs and outputs.
  • Frequency response 20 Hz to 20 kHz +0, -1 dB.
  • 5 segment LED meters with limit indication on each output.
Check Stock

Linsoul Topping D10 Balanced USB DAC with ES9038K2M, XMOS XU208, ASIO Drivers, Balanced TRS/XLR Output, Automatic Power on/Off, Support DSD256 PCM384 (Silver)

  • 【Support DSD256&PCM384 and USB Interface Application】 If you already have a better DAC, you can connect the D10 Balanced's coaxial /optical output to the DAC and let the D10 Balanced serve as the USB interface for your DAC, adding a better USB input to your decoder. When used as an interface, D10 Balanced could output no higher than PCM 24bit 192kHz when served as a USB bridge.
  • 【Wide compatibility and Customized ASIO Drivers】 D10 Balanced has a wide range of compatibility: Windows(above Win10), MAC, and Linux can all be plug and play. D10 Balanced supports professional ASIO applications. When using ASIO in MAC or Linux, it can be set in the music playback software.
  • when using ASIO with Windows, you can use the customized driver from The sycon, for high-resolution files, especially DSDNative support is better..
  • 【Automatic power on/off】 No matter whether the USB interface still has electrical output after the shutdown, D10 Balanced will synchronously power on/off with the PC. Solved part of the USB devices in the computer shutdown still work after the embarrassment..
  • 【Audio format and sampling rate indicator】 D10 Balanced can accurately indicate the audio format(PCM or DSD)and a sampling rate of the playing music. Orange LED is soft and no....
Check Stock

Livewire SPDI Passive Direct Box with Attenuation Pad

  • Livewire SPDI Passive Direct Box with Attenuation Pad.
  • The SPDI passive direct box from Live Wire Solutions features a 1/4" high impedance instrument input and output plus balanced and floating low-impedance XLR output that ignores +48V phantom power..
  • Variable attenuation provides maximum input flexibility, while Lift mode severs ground connection between the input and the XLR output..
  • GND mode leaves ground connection intact between input and XLR output..
  • 1/4" high impedance input and throughput Balanced XLR output.
Check Stock

Rockville REQ215 Dual 15 Band 1/3 Octave Graphic Equalizer with Sub-Output

  • The Rockville REQ215 is a Dual Channel 30 Band (15 bands per channel) rack mountable EQ. Dual channel (15 bands per channel). Switchable 12 Band or 6dB boost/cut range..
  • 80Hz 24dB low cut filter. 2/3 octave filter sets. 25 Hz to 16 kHz effective equalization range. Constant Q filters. Output level LEDs (-12 to +17 dB). Low cut filter switch with status LED..
  • XLR inputs and outputs for balanced operation. Bypass switch with status LED. Balanced XLR input/output. Subwoofer out. Subwoofer X-Over Freq ( 30Hz - 200Hz ) selecting..
  • Connectors : XLR balanced inputs and outputs. Ground lift switch. Frequency Centers : 31.5 Hz, 40 Hz, 63 Hz, 100 Hz, 160 Hz, 250 Hz, 400 Hz, 500Hz, 630 Hz, 800 Hz, 1 kHz, 2 kHz, 4 kHz, 8 kHz, 16 kHz..
  • Input Impedance : 20k ohms. Output Impedance : 1.5k ohms. Maximum Output Level : 11 VAC. Level Control : +/- 12 dB. Signal to Noise : 90 dB. Distortion : 0.03%. Power : 120 Volt..
Check Stock

Fairfield Circuitry The Accountant

  • No integrated circuits in the signal path Transformer-balanced input and output Selectable output transformer loading resistors by an internal T4-style electro-optical attenuator Very simple to operate with only two main controls, Gain and Peak Reduction A big meter shows gain reduction or output level at two different reference levels Hardwire bypass switch for easy comparisons XLR and TRS input and output jacks for flexible connections Link jack and switch for conne.
  • The COMP-3A is a single-channel vintage-style Compressor/Leveler.
  • The signal path uses only discrete components like resistors, capacitors and transistors, and the input and output is transformer balanced using two different transformers, each one optimized for its purpose.
  • This is the way audio components were built before integrated circuits became available.
  • Integrated circuits are small and cheap and widely used in most modern designs.
Check Stock

HIFIMAN EF400 Desktop Balanced Headphone DAC& Amplifier with Himalaya R2R DAC, 3.5/4.4/6.35mm Output for Home Audio

  • ...pment. The HIMALAYA DAC module supports the standard PCM music signal transmitted by the most common IIS (Integrated Interface of Sound) audio interface, with a maximum resolution of 24Bit..
  • Full Balance: The four-channel differential structure features a DAC, buffer and active filter that add up to unbeatable fully balanced output for stunning performance from a Class AB DAC/amplifier. The four-channel fully differential amplifier circuit features a maximum output of 10.7 Vrms (THD.
  • 4-level Function Switch: High Gain NOS, High Gain OS, Low Gain OS, Low Gain NOS ★Headphone Out (Front Panel): 6.35mm Single-ended.
  • XLR 4-Pin Balanced Output. ★Line Out (Rear Panel): CANNON Balanced Output.
  • RCA (Single-ended).★ Input: USB Type C.
Check Stock

Blackmagic Design Mini Converter - Analog to SDI

  • Analog to SDI Conversion: Use this device to convert analog video sources to SDI video output.
  • Embedded Audio: This unit can embed SDI audio from balanced AES/EBU or analog audio inputs.
  • og to SDI Conversion: Use this device to convert og video sources to SDI video output.
  • Embedded Audio: This unit can embed SDI audio from balanced AES/EBU or og audio inputs.
  • It will accept an HD/SD component, NTSC, PAL, or S-video signal and convert it to an SDI output.
Check Stock

Topping D10 Balanced USB Converter TRS/XLR/Opt/Coax Output ES9038Q2M DSD256 HiFi Decoder Digital to Analog Converter Home Audio DAC (Black)

  • ★ The Difference: D10 Balanced is a supplement to D10s, the two are in a coexistence relationship, the method of use is same.
  • D10s is for Single-ended applications, D10 Balanced is for Balanced applications. (NOTE: The balanced output of D10 Balanced does not support any adapter convert to the single-ended.).
  • ★ USB Interface Application: If you already have a better DAC, you can connect D10 Balanced's coaxial/optical output to your DAC,then D10 Balanced serve as a USB bridge..
  • ★ Audio Format & Sampling Rate indicator: D10 Balanced is compatible with 16-32bit/44.1-384KHz and DSD64-DSD256 Native.
  • It can accurately indicate the audio format(PCM or DSD) and sampling rate of the playing music. Orange LED is soft and not dazzling even at night..
  • ★ D10 Balanced supports professional ASIO applications. It can be set in the music playback software.
  • When using ASIO with Windows, you can use the customized driver from Thesycon..
Check Stock

Matched Pair 7-Pin GE JAN 5654W Vacuum Tubes Upgrade for 6AK5/6J1/6Ж1/ EF95/6J1P

  • About Tube + Transistor Hybrid amplifier： Front tube amplifier and rear transistor combine the advantages of two amplifier circuits to achieve the....
  • Tube Amplifier ：Adopt four 6J1 tubes for pre amp, making voice sweet and exquisite..
  • Transistor for Class-A amplifier： Adopt transistors for class A buffer, output power up to 2000mW, can easily drive many kind headphones..
  • XLR and 4. 4mm balanced input/output： It has XLR and 4.4mm balanced input, 4-pin XLR and 4.4mm balanced output, rich and diverse interfaces,....
  • Built-in Mute Circuit： It built-in relay for mute circuit when turn on amplifier to avoid POP noise and make sure the tube is worked at its best....
Check Stock

Rockville RockMix 4 USB Computer Recording Interface/EQ 4-Channel Pro Mixer

  • ... channels 1 & 2 for use with condenser microphones, Channel 1 and Channel 2: XLR and ¼” TRS combo input jacks, Channel 2: mic/instrument level switchable allowing you to connect a mic, instrument, or any other audio device,.
  • Stereo channel 3 and 4 have ¼” inputs (balanced or unbalanced), CH3 & CH4 with GAIN switch and LEVEL control, Independent Level Controls for Main and Headphone/Monitor Outputs, Integrated Plug-and-Play USB Audio Interface for Mac & PC, Operates on USB BUS Power or 5V DC External Power Supply (Included), 3.5mm aux input jack for sound effects or background music, Low power consumption means you can power the mixer from the USB of your laptop or by plugging it into an outlet.
  • Super mini 4-channel mixing console designed for home studio recordings or live broadcast streaming, (2) headphone outputs (¼” and 3.5mm), ¼-inch TRS Stereo Output, ¼” Stereo Monitor Output, Additional 3.5mm mic input allow you to connect an additional microphone to channel 1, Channels 1 and 2 each have a 2-band EQ and Pan controls and gain controls,.
  • TO PC slide switch allows you to select which channels get....
Check Stock

Topping D10 Balanced USB Converter HiFi Converters TRS/XLR/Opt/Coax Output ES9038Q2M XMOS XU208 PCM384KHz DSD256 Digital to Analog Converter Home Audio DAC (Black)

  • ★ The Difference: D10 Balanced is a supplement to D10s, the two are in a coexistence relationship, the method of use is same.
  • D10s is for Single-ended applications, D10 Balanced is for Balanced applications. (NOTE: The balanced output of D10 Balanced does not support conversion to single-ended (RCA) in any way..
  • ★ USB Interface Application: If you already have a better DAC, you can connect D10 Balanced's coaxial/optical output to your DAC,then D10 Balanced serve as a USB bridge..
  • ★ Audio Format & Sampling Rate indicator: D10 Balanced is compatible with 16-32bit/44.1-384KHz and DSD64-DSD256 Native.
  • It can accurately indicate the audio format(PCM or DSD) and sampling rate of the playing music. Orange LED is soft and not dazzling even at night..
  • ★ D10 Balanced supports professional ASIO applications. It can be set in the music playback software.
  • When using ASIO with Windows, you can use the customized driver from Thesycon..
Check Stock

Rockville REQ231 Dual 31 Band 1/3 Octave Graphic Equalizer with Sub-Output, Grey

  • Rockville REQ231 Dual 31 Band 1/3 Octave Graphic Equalizer With Sub-Output. Dual channel (31 bands per channel). Variable stage low and high cut filters..
  • 1/3 octave filter sets (ISO centers). 20 Hz to 20 kHz effective equalization range. Constant Q filters. Selectable 6dB or 12dB cut or boost range. Output level LEDs (-10 to +17 dB)..
  • Bypass switch with status LED. Balanced XLR input/output. Subwoofer out. Channels: 2 (stereo). Connectors: XLR balanced inputs and outputs. Bands: 31 per channel..
  • Frequency Centers: 20 Hz, 25 Hz, 31.5 Hz, 40 Hz, 50 Hz, 63 Hz, 80 Hz, 100 Hz, 125 Hz, 160 Hz, 200 Hz, 250 Hz, 315 Hz, 400 Hz, 500 Hz, 630 Hz, 800 Hz, 1 kHz, 1.25 kHz, 1.5 kHz, 2 kHz, 2.5 kHz.
  • Control Range: Selectable +/-12dB 0r +/-6dB. Input Impedance: 50k ohms. Output Impedance: 600 ohms. Maximum Output Level: +21dBLevel Control: +/- 10 dB. Signal to Noise: 003e93 dB. Distortion: 0.005%..
Check Stock