Reviews Backwash Pumps

Danner Pondmaster Clearguard Pond Filter 5500 with 18W UV

  • Not Included - Backwash Air Kit Needed: SMALL (Item #15660 w/AP-40).
Check Stock

Aqua Ultraviolet Ultima II 6000 Koi Pond Bead Filter with Free Floating Pond Thermometer - 2 inch Valve A50007

Check Stock

Aqua Ultraviolet Ultima II 2000 Koi Pond Bead Filter with FREE Floating Pond Thermometer - 1.5 inch Valve A50019

Check Stock

PneumaticPlus RED EPDM synthetic Rubber Air & Water Hose 1/4\ ID x 0.53\ OD with 1/4\ NPT Male Fitting Connections (6 FT)

  • ...ial reinforced with high tensile strength polyester yarn, 3" Female Type C Coupler x 3" Male Type E Connector is installed on both ends of hose by stainless steel clamps, high pressure, sturdy and durable, abrasion resistance, anti-aging, chemical resistance, you can use for a long time..
  • 003c/b003e[SIZE]:003c/b003e Backwash pump hose, standard 3 inch diameter, Flat width 4.85 inch.
  • 3 in Aluminum cam lock fittings type C, type E and extra TYPE A adapter. Length: 50 feet.
  • Temperature Range: 23°F to 149°F (-5°C to 65°C).
  • 003c/b003e[NO LEAK]:003c/b003e Pool Backwash hose doesn’t leak or burst within 90 psi working pressure. Because the delivery hose body adopts fine double-sided coating and fiber reinforcement. The camlock coupling shank is special multi-section structure and added black rubber ring and sealant at the connection..
  • 003c/b003e[WIDELY USED]:003c/b003e Ideal for draining swimming pools, backwash pool filter, sewage pump, sump pump, trash pump, pool drain and sand filter pumps etc.
  • widely used in household, mine, factory, agriculture, and architectural engineering.
  • This drain hose can adapt to most outdoor conditions and all seasons..
  • 003c/b003e[EASILY USE]:003c/b003e It can be easily connected, after Type A is....
Check Stock

Hayward RC9990CUB TigerShark Robotic Pool Vacuum (Automatic Pool Cleaner)

  • The Tiger Shark QC offers a fast 90-minute Quick Clean cycle.
  • In-ground residential pools up to 20 x 40 feet.Runs separately from the pool’s filtration system reducing the frequency of filter backwash cycles.
  • No extra hoses, hookups or pumps required.
  • Unique cartridge filter system makes emptying easy, just open the cleaner, remove the cartridge and rinse with a hose.
  • Built with an efficient 24-volt motor designed to use less energy and lower cost.
Check Stock

2' x 50ft PVC Lay Flat Discharge Hose With Aluminum Camlock C & E Fittings, Cam Lock Fitting Type A included, Heavy Duty Reinforced Pump Backwash Hose Assembly

  • ...is made of PVC material reinforced with high tensile strength polyester yarn, 2" Female Type C Coupler x 2" Male Type E Connector is installed on both ends of hose by stainless steel clamps, high pressure, sturdy and durable, abrasion resistance, anti-aging, chemical resistance, you can use for a long time..
  • [SIZE]: Backwash pump hose, standard 2 inch diameter, Flat width 3.4 inch.
  • 2 in Aluminum cam lock fittings type C, type E and extra TYPE A adapter. Length: 50 feet.
  • Temperature Range: 23°F to 149°F (-5°C to 65°C).
  • [TYPE A FITTINGS]: The item include a type A (male adapter x female NPT threaded ) cam and groove hose fitting, you can directly screw onto pump male threaded outlet, then realize quick connect or disconnect between discharge hose assembly with pump..
  • [NO LEAK]: Pool Backwash hose doesn’t leak or burst within 90 psi working pressure. Because the delivery hose body adopts fine double-sided coating and fiber reinforcement. The camlock coupling shank is special multi-section structure and added black rubber ring and sealant at the connection..
  • [WIDELY USED]: Ideal for draining swimming pools, backwash pool filter, sewage pump, sump pump, trash pump, pool drain and sand filter pumps etc.
Check Stock

2' x 50ft PVC Lay Flat Discharge Hose With Aluminum Camlock C & E Fittings, Cam Lock Fitting Type F included, Heavy Duty Reinforced Pump Backwash Hose Assembly

  • ...is made of PVC material reinforced with high tensile strength polyester yarn, 2" Female Type C Coupler x 2" Male Type E Connector is installed on both ends of hose by stainless steel clamps, high pressure, sturdy and durable, abrasion resistance, anti-aging, chemical resistance, you can use for a long time..
  • [SIZE]: Backwash pump hose, standard 2 inch diameter, Flat width 3.4 inch.
  • 2 in Aluminum cam lock fittings type C, type E and extra TYPE F adapter. Length: 50 feet.
  • Temperature Range: 23°F to 149°F (-5°C to 65°C).
  • [TYPE F FITTINGS]: The item include a type F (male adapter x male NPT threaded ) cam and groove hose fitting, you can directly screw onto pump female threaded outlet, then realize quick connect or disconnect between discharge hose assembly with pump..
  • [NO LEAK]: Pool Backwash hose doesn’t leak or burst within 90 psi working pressure. Because the delivery hose body adopts fine double-sided coating and fiber reinforcement. The camlock coupling shank is special multi-section structure and added black rubber ring and sealant at the connection..
  • [WIDELY USED]: Ideal for draining swimming pools, backwash pool filter, sewage pump, sump pump, trash pump, pool drain and sand filter pumps etc.
Check Stock

Hayward RC9740CUB SharkVac Robotic Pool Vacuum (Automatic Pool Cleaner)

  • Uses smart steering technology that provides an efficient cleaning pattern, scouring pool floors and coves in just about 2 hours.
  • Runs separately from the pool’s filtration system reducing the frequency of filter backwash cycles.
  • Top-access filter allows quick debris removal and easy cleanup.
  • No extra hoses, hookups or pumps required.
  • 2 fine porosity filter elements – just remove and rinse with garden hose, no need to turn cleaner over to empty.
  • Top-access cartridge filter allows quick debris removal and easy cleanup.
Check Stock

Beauty Salon Equipment Furniture Salon Package Massage Shampoo Backwash Unit with Reclining Backrest Adjustable Electrical Footrest and Salon Styling Chairs with Chrome Armrest

  • HIGH DENSITY MEMORY, HIGH GRADE FAUX LEATHER. REINFORCED SOLID STEEL FRAME SUPPORTS CHAIR AND BASIN.
  • 1 YEAR WARRANTY ON ALL PRODUCTS w/ 2 YEARS WARRANTY ON PUMPS AND 3 YEARS ON CHAIR BASES.
Check Stock

LAGarden 16\ Above Inground Swimming Pool Sand Filter System with 6 Way Valve and Stand Fit 1/2HP 3/4HP Water Pump

  • [Application & Compatibility]: 16" Sand filter is designed for separating the suspended substance such as impurity & micropollutant from the water by filtering sand and discharging clean water for above-ground or in-ground swimming pools and fish ponds.
  • compatible with 0.75 to 1HP pumps, also applicable to our pump model YES0493, any inquiry is welcome.
  • [Multifunctional Valve]: 7-Way controlling valve with operation panel not only can offer "Filter" function, but also can set "Backwash.
Check Stock

Summer Waves P53ST1100 Universal 10 Inch Sand Filter Pump Pool Cleaning System with 6 Function Handle for Above Ground Swimming Pool

  • 10-INCH POOL PUMP: 10-inch sand filter pump keeps your pool sparkling and clean during pool season.
  • SAND FILTRATION SYSTEM: Efficient and cost-saving filter system uses natural sand to clean pool water.
  • 6-FUNCTION HANDLE: Features easy-to-use 6-function handle including backwash, rinse, filter, drain, recirculate, closed position.
  • LOW-MAINTENANCE: Filter sand only needs to be replaced every 5 years.
  • UNIVERSAL DESIGN: Suitable use for all above-ground pools and fits all pumps with 1.5-inch hose fittings.
Check Stock

Summer Waves P53ST1600 Universal 12 Inch Sand Filter Pump Pool Cleaning System with 6 Function Handle for Above Ground Swimming Pool

  • 12-INCH POOL PUMP: 12-inch sand filter pump keeps your pool sparkling and clean during pool season.
  • SAND FILTRATION SYSTEM: Efficient and cost-saving filter system uses natural sand to clean pool water.
  • 6-FUNCTION HANDLE: Features easy-to-use 6-function handle including backwash, rinse, filter, drain, recirculate, closed position.
  • LOW-MAINTENANCE: Filter sand only needs to be replaced every 5 years.
  • UNIVERSAL DESIGN: Suitable use for all above-ground pools and fits all pumps with 1.5-inch hose fittings.
Check Stock

Audio Recorder X

  • SHAMPOO BACKWASH UNIT: This professional shampoo chair and bowl is a complete hair washing station, ideal for hair salons and barber shops..
  • SLEEK DESIGN: The backwash station features smooth lines with gently rounded arms and back in classic grey vinyl, finished with a clean white bowl to complement any modern salon..
  • EXTRA WIDE SEAT: The comfortable seat features high density foam padding giving the extra wide chair a cushioned finish, while a kick-out leg rest allows clients to find their perfect position..
  • TILTING BOWL: The tilting porcelain backwash bowl is finished with a custom fitting neck rest, and is supplied with all hardware including a single handed faucet, black shampoo hose and vacuum breaker..
  • 1 YEAR WARRANTY: We understand the needs of the busy professional salon.
  • your Buy-Rite Lexus salon backwash unit comes with a 1-year warranty for complete peace of mind..
Check Stock