Reviews Back Pressure Check Valve

EVIL ENERGY 1/2 12mm Non Return One Way Check Valve for Fuel Line Oil Petrol Diesel Aluminium Silver Pack of 2

  • Function: The basic design of a one way check valve inhibits back flow in a line. Arrow marked on valve, showing fluid flow direction, preventing fuel....
  • Feature: The non return check valve body is made of high quality aluminum alloy can use longer than plastic one. Stable characteristics, high....
  • One-way Check valve installs in many diesel / bio fuel systems / Carburetors and low pressure fuel systems where you desire fuel to only flow one way.....
  • Easy installation and replacement. According to the little arrow on the valve, connect the fuel line. You can use some hose clamps which can make sure....
  • The minimum upstream pressure required to operate the aluminum one-way check valve is 2.9psi (0.2 bar). Working pressure:2.9-87 psi (0.2-6bar)....
Check Stock

Wilkins 115-975XL2 1.5-Inch Lead Free Reduced Pressure Backflow Preventer

  • Reduced pressure principle backflow preventer consisting of a pressure differential relief valve located between twoindependently operated spring-loaded center guided check valves, “Y” pattern body.
  • Complete with two full port resilient seated ball valves for shut-off and four resilient seated ball valve test cocks.
  • Pre-plumbed backflow station. Assembly can be of the reduced pressure principle or of the double check type.
Check Stock

GAS Air Compressor Pilot check valve unloader valve combo 145-175 NG7

  • 【Versatile】This 3-Port Brass Female Threaded Air Compressor Check Valve excellent replacement for the old or broken check valve of your air compressor.
  • 【Easy to install】Easy to install with the thread connecting ends, the three male thread connectors are respectively for tube connecting, air pressure tank and compressor piston pump.
  • 【Package Content】 1 x Air Compressor Check Valve.
  • 10mm Female Thread Tube Connector Air Compressor Check Valve, Male Thread : 16mm Hex Head Size : 18mm.
  • 【After-sale Service】Each Compressor Check Valve is quality checked, we provide 30-day money back service or exchange for customers, just feel Free to contact us if you have any problem with the product, we will solve for you within 12 Hours.
Check Stock

JoyTube 5 Packs Check Valve 1/8” 3MM One-Way PVDF Plastic Hose Barb for Fuel Gas Liquid Air

  • One way inline Check valve can connect with hose barb in both sides.
  • Barb hose check valve’s Opening pressure: 0.5 Kpa, Maximum back pressure: 300Kpa.
  • PVDF wear resistant check valve’s inside is designed with a pagoda-shaped card slot, non-slip and non-toxic, with good airtightness and good adsorption performance.
  • Perfect for the hydraulic system to prevent reverse flow of material, or compressed air for pneumatic system to prevent.
  • Made of PVDF, sturdy, wear-resistant and durable for long service.
Check Stock

EZ-FLO 20405LF Brass In-Line Check Valve

  • ✅DESIGN- The valve features a stainless steel to prevent water from traveling back to the source to avoid contamination..
  • ✅QUALITY- Made of from heavy-duty brass for extra durability and strength during every use..
  • ✅FUNCTIONALITY- The working pressure of the check valve is 200 PSI with a minimum of 5 PSI to open the spring..
  • ✅MEASUREMENT- The in-line check valve is equipped with a 1 inch female iron pipe (FIP) threaded connection for a maintenance free operation..
  • ✅SAFETY- The EZ-FLO in-line check valve is compliant with the Safe Drinking Water Act..
Check Stock

ANPTGHT One Way Check Valve 1/8 3MM Hose Barb Non Return Ozone Resistance Plastic Valve for Water Fuel Oil Air Gas Pack of 3

  • 【Material】 Plastic barb connector, made of high-quality PVED material.
  • 【Size】 1/8" OD One Way Check Valve，Can fit 1/8" hose ID.
  • 【Function】The check valves are applicable for fluid systems to prevent countercurrent liquids, or for pneumatic systems to prevent reverse flow of compressed air..
  • 【Performance】Hose barb check valve’s Opening pressure: 0.5 Kpa, Maximum back pressure: 300Kpa. Normal performance under 25 ℃ to 60 ℃,Strong resistance to acid, alkali, salt corrosion ability.
  • 【Design】The check valve is designed with a non-slip card slot inside, which has strong adsorption performance, prevents falling off, non-toxic, and has air tightness..
Check Stock

Leadrise 12V Electric Fuel Pump Universal Inline Fuel Pump Universal Low Pressure Gas Diesel Fuel Pump 2.5-4psi HEP-02A

  • ★【SPECIFICATIONS: 】 Inline Fuel Pump, Output Pressure : 2.5-4 psi, Voltage : 12 Volt, Flow Rate : 30 GPH, Hose Size : 8 mm ( 5/16 inch ).
  • ★【Electric Fuel Pump Performance:】 Low Pressure Fuel Pump, build-in check valve design to prevent back flow, light-weight and small size, Using a plunger-type of fuel supply way, suction stronger, oil supply more stable..
  • ★【12 Volt Fuel Pump: 】Upgrade check valve provides optimum traffic, reducing the noise of the pump so we can operate quietly. The Oil Absorption Capacity is Strong Enough to Ensure the Supply of Fuel.
  • ★【Easy to Install:】Universal Electric Fuel Pump 2 bolt fixing, 2 wires design, build-in check valve designed to prevent back flow. It can be used as booster, standby unit or as a completely independent fuel pump installation and mounted anywhere..
  • ★【WIDE APPLICATION:】Electric fuel pump Fit all 12 Volt Cars such as Toyota, Ford, Honda, Mazda, and any other suitable car Trucks , Boats & Generators..
Check Stock

Galaxy's Edge Star Wars Legacy Lightsaber (26' Lightsaber Blade)

  • Pack of 2 premium inflatable swords. Luke / Yoda green single blade design..
  • New design: Longer, stronger, and better fight action! Great for high-energy low-impact battle..
  • Customize stiffness and impact level by adjusting air pressure. These sabers can be inflated extra-firm to ridged with an air pump, or compressor. They will swell in diameter with over inflation, so try to keep the air pressure at a minimum to achieve the desired firmness, but maintain the original shape. *For the perfect air pump, no batteries required, and excellent sanitary choice for inflating these, go with Amazon’s ASIN: B091NDVVP3.
  • Easy inflation: One-way check valve incorporated in Inlet to help prevent air from escaping while inflating. For best results: Press back of inlet to help establish the seal prior to initial inflation. Inflate, and hold finger over inlet for a few seconds. This gives the check valve time to rest and seal, and helps maintain air between breaths. Close valve, wait a minute or so for the plastic to relax, and inflate further to desired firmness..
  • To deflate: pinch base of valve. This opens valve and allows air to escape..
Check Stock

4 Way Gas Distribution Co2 Distributor Manifold With 5/16 inch Barb/Stem Splitter Beer Integrated Check Valves for Homebrew Beer Making Brewing Tool

  • ???? Gas Manifold, Machined from a single piece of aluminum with built-in check valve protects your shunt and prevents gas backflow..
  • ???? Designed with a 2-point screw hole on the top for easy installation to other equipment. 5/16″ threaded ports barbed inlet and 5/16″ barbed outlets..
  • ???? The distributor allows you to split the gas supply into multiple lines. Each line has its own shutoff valve. Chrome Plated valves with spring loaded Ball check valve. Run with 4 lines from one CO2 source..
  • ???? Due to the one-way valve mechanism, the pressure drop between the ball valves in these manifolds is approximately 2 psi. You will need to set the pressure on the regulator to 2 psi above the pressure required in the keg.).
  • ???? Made of prime aluminum, brass and stainless steel material, which is extremely durable. MONEY-BACK GUARANTEE -customer satisfaction is our #1 policy!. If you are not satisfied with our product or if you experience any issues, Please contact us.
Check Stock

Aquarium DIY CO2 Generator System Kit CO2 Generator System with Solenoid Valve Bubble Counter Check Bubble Diffuser Carbon Dioxide Reactor Kit for Plants Aquarium

  • ✪【Be made of aluminum alloy】It is strong, durable and efficient. Well-sealed caps and pipes, leak-proof, non-deformed, never loose. Professional pressure guage for pressure watching. Cheap, simple to create pure CO2 constantly by chemical reactions..
  • ✪【Solenoid valve】To control the on and off of CO2 generator system using with a timer(not included). Bubble counter with check valve: Flow-rate of CO2 gas indication device and prevent water flow back into the bottle..
  • ✪【Equipped with a safety valve】The pressure is greater than 4kg pressure will relief automatically, carbonated beverage bottle pressure is 8kg, safety is ensured..
  • ✪【The safety valve supports manual pressure relief】When the pressure is below 4kg, it can be manually relieved by pull the ring of the safety valve. It is very safe..
  • ✪【Come with a bubble diffuser】Refine the bubbles and make it easy to dissolve in water and be absorbed by plants. Inject to your aquarium with CO2 quickly and easily..
Check Stock

2 PCS 1/4" 6mm Non Return One Way Check Valve for Fuel Line Oil Petrol Diesel Aluminium Silver

  • 【High Quality】This check valve made of premium aluminum alloy can use longer than the plastic one. Stable characteristics, high reliability..
  • 【Features】The push-lock design of the connector stop the hose from sliding off and easy to connect. it prevents fuel from returning back to the tank and keeps it in the line..
  • 【Application】This inline check valve is suitable for petrol, diesel, water, oil. Great for water pressure pumps and galley pumps which are not self-priming. Ideal for marine, automotive, caravans/RV, and agriculture..
  • 【Easy Installation】Arrow marked on the valve, refer to the arrow while connecting the fuel line. Opening pressure: 0.2 bar, Working pressure range: 0.2 - 6 bar, Operating temperature range: -30°C - 130°C..
  • 【Service】100% satisfaction guarantee, If you have any issues with the part, simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you..
Check Stock

Electric Fuel Pump 12v Universal - Low Pressure 2.5-4 PSI Inline Fuel Pump for Lawn Mower Carburetor Gas Diesel Engine HEP-02A

  • Inlet and Outlet diameter: 8mm (5/16 inch)..
  • Electric Fuel Pump 12v Universal, fits for lawn mower marine motorcycle carburetor, all 12 volt cars, trucks, boats & generators with gas diesel gasoline petrol engine.
  • Fuel Transfer Pump, 2 bolt fixing, 2 wires design, build-in check valve designed to prevent back flow..
  • Low Pressure Fuel Pump, build-in check valve design to prevent back flow, light-weight and small size, plunger-type fuel supply, suction stronger, more stable oil supply.12 Volt Fuel Pump, two-wire design, can be used as booster, standby unit or as a completely independent fuel pump installation and mounted anywhere..
  • 1-Year-Warranty, made of High Quality & Durable Material, manufactured in ISO 9000 / ISO 9001 / ISO 9002 Certified Facilities and 100% mechanically tested ensures optimal performance and enhanced durability.
Check Stock

X AUTOHAUX 4 Pcs 39mm Screw-on Valve Cap Stem Extension Wheel Tire Cap Extender Adapter for Auto Car Truck Chrome Plated Brass

  • [Durable Performance] The chrome plated brass surface is durable and waterproof, which prolongs the service life of the original tire valve screws..
  • [Screw-on Design] This extension valve cap is screwed on instead of the original valve cap and doesn't need to be removed to check air pressure or to....
  • [Easy Installation] Easy to install, simply screw onto current tire stem, no additional dust cap required..
  • [Increase Tire Life Span] This screw-on valve cap stem extension will increase tire life span, lower fuel consumption and increase driving safety..
  • [Easy to Check Pressure] It is very easy to check tire pressure without losing your valve caps and effectively prevent gradual loss of air..
Check Stock