Reviews Axis Pump

SCULPFUN S30 Laser Engraver with Auto Air Assist Pump & Nozzle, Limit Switchs, 5W CNC Laser Cutter, Industrial Grade Accuracy Engraving Machine, 10 Times Longer Laser Service Life

  • ...rom the air-assisted nozzle dramatically increases cutting efficiency, cutting more than 5 times faster than without air assist..
  • Higher Precision Engraving & Cutting: S30 series laser engraving machine adopts extremely sturdy 0.005mm high precision linear slide rail X-axis, and a 0.08mm x 0.06mm ultra-fine compressed spot, making it reach industrial grade engraving accuracy. Achieve detailed and realistic engraved images ..
  • Smooth Edge & Deeper Cutting: Use air to quickly reduce the surface temperature of the cut object to avoid deformation and discoloration caused by high laser temperature, and powerful airflow to blow away the residue, ensure clean surface and smooth cutting edge, speeding up the cutting process and increasing the cutting depth..
  • Expandable Engraving Area for Both XY Axis: The S30 series has an innovative XY axis expandable design. The original engraving area is about 400x400mm, we offer two additional engraving area options: Y-axis extension kit for 935x400mm, or upgraded XY axis expansion kit for 935x905mm(36.8x35.6"), which can help you better handle larger engraving or cutting jobs.....
Check Stock

Seven Master 1189 GPH(4500L/h) Aquarium DC Water Pump with Controller, 30W 11ft Submersible Pump for Fish Tank, Pond, Fountains, Waterfall, Hydroponic

  • ... × 6.6 inches with 3 nozzles(3/5",3/4",1" ID) for you to meet different requirements. Cord length from the pump to controller is 6ft, the power cord length is 6ft..
  • 【DC Controllable Water Pump】Less power consumption with high outpu which compared with other pumps. Special propeller design DC motor with ceramics axis and high quality magnet, achieve low noise operation, high efficiency and energy saving power supply 65%..
  • 【Easy External Controller】The external controller has only four simple buttons and a red LED display, making it easy to operate. There are 12 speed adjustable for flow control and wave maker control, with 10 minutes feeding mode.. Multiple options to match your needs..
  • 【Auto Shut Off】When the pump system is powered on for the first time, it is allowed to run slowly in the air for 5 seconds. During the slow speed period, if water is detected, it will work at the normal speed. When the pump works normally, it will stop immediately if no water is detected and the digital will display as "Err" and repeat the cycle.
  • 【Wide Application】Seven Master aquarium pump can be used in Freshwater or Saltwater. Ideal for fish tank, aquariums, ponds, waterfalls, fountains and water features NOTE: The controller panel is not waterproof, no....
Check Stock

Genmitsu CNC Machine 4040-PRO for Wood Acrylic MDF Nylon Carving Cutting, GRBL Control, 3 Axis CNC Router Machine, Working Area 400 x 400 x 78mm (15.7” x 15.7” x 3.1”)

  • An effective working area of 15.7” x 15.7” x 3.1” is large enough for most daily CNC projects. The redesigned Z-axis carriage makes swapping a spindle easier. Adding more screw holes on the non-all-in-one Z-axis carriage allows you to install the larger spindle higher for extra overfeed height..
  • New Steel HSS Frame - all new redesigned frame structure, each axis is composed of two 16mm Steel HSS linear tubes and a lead screw motion drive, dual Y axis rails, and all metal frame. This new high-rigidity structure ensures the stability and accuracy of the CNC machine..
  • Still based on open-source Grbl v1.1, the 4040-PRO CNC router has stepped up to more powerful but silent Toshiba TB6S109 drivers with 32-bit chips. Upgrades include extended function ports like a dedicated 3 Pin Laser Port, Air Assistance Pump Port, and MPG Port..
  • All main parts are pre-assembled and it just takes about 15 minutes to finish the whole machine assembly. The spoilboard is combined by two pieces of MDF boards. Each MDF board could be replaced individually. You don’t need to replace the whole spoilboard when a panel gets damaged..
Check Stock

SCULPFUN S30 Pro 10W Laser Engraver with Auto Air Assist Pump & Nozzle, Cleaner and Faster Laser Cutter, Higher Accuracy Laser Engraving Machine, 10x Service Life, 36.8"x35.6" Expandable Working Area

  • ...rom the air-assisted nozzle dramatically increases cutting efficiency, cutting more than 5 times faster than without air assist..
  • Higher Precision Engraving & Cutting: S30 series laser engraving machine adopts extremely sturdy 0.005mm high precision linear slide rail X-axis, and a 0.08mm x 0.06mm ultra-fine compressed spot, making it reach industrial grade engraving accuracy. Achieve detailed and realistic engraved images ..
  • Smooth Edge & Deeper Cutting: Use air to quickly reduce the surface temperature of the cut object to avoid deformation and discoloration caused by high laser temperature, and powerful airflow to blow away the residue, ensure clean surface and smooth cutting edge, speeding up the cutting process and increasing the cutting depth..
  • Expandable Engraving Area for Both XY Axis: The S30 series has an innovative XY axis expandable design. The original engraving area is about 400x400mm, we offer two additional engraving area options: Y-axis extension kit for 935x400mm, or upgraded XY axis expansion kit for 935x905mm, which can help you better handle larger engraving or cutting jobs..
Check Stock

ARTHEALTH Folding Bicycle Pedals 9/16\ Inch Bike Pedals Road Bicycles Nylon Folding Bike Pedals

  • Bike pedals durable material: Made of Nylon body, strong and sturdy steel ball axis make it durable for long-time use..
  • ***Only Suitable for normal use,not suitable for off-road,mountain,BMX extreme sports***Easy to put on with bike wrench: Bike pedals “R” and “L”,marked on the top of the screw thread help you won’t mix up the two sides,Get done with the installation within several minutes..
  • Pedals size: *********Spindle (Size, Material) 9/16" Cr-Mo spindle. NOT 1/2”inch and the diameter is 1.4CM*********,Suitable for both Mountain Bikes or Road Bicycles,Hybrid Bike,Folding Bike..
  • Bicycle pedals More Non-slip Pedals: You won’t slipped off pedals due to excellent grip,Smoothly spinning steel ball axis increases pedaling rate, which reduces effort when having to pump up a hill and offers excellent riding experience..
  • Ride safely during the night: Reflectors on both sides of the pedals can  highly increase the visibility in the dark..
Check Stock

ARTHEALTH Folding Bicycle Pedals 9/16\ Inch Bike Pedals Road Bicycles Nylon Folding Bike Pedals Black

  • Bike pedals durable material: Made of Nylon body, strong and sturdy steel ball axis make it durable for long-time use..
  • ***Only Suitable for normal use,not suitable for off-road,mountain,BMX extreme sports***Easy to put on with bike wrench: Bike pedals “R” and “L”,marked on the top of the screw thread help you won’t mix up the two sides,Get done with the installation within several minutes..
  • Pedals size: *********Spindle (Size, Material) 9/16" Cr-Mo spindle. NOT 1/2”inch and the diameter is 1.4CM*********,Suitable for both Mountain Bikes or Road Bicycles,Hybrid Bike,Folding Bike..
  • Bicycle pedals More Non-slip Pedals: You won’t slipped off pedals due to excellent grip,Smoothly spinning steel ball axis increases pedaling rate, which reduces effort when having to pump up a hill and offers excellent riding experience..
  • Ride safely during the night: Reflectors on both sides of the pedals can  highly increase the visibility in the dark..
Check Stock

Pipeless Jet Magnetic / Spa Pedicure Chair Motor for Luraco Magnet Jet

  • Easy install· Pipe-less Jet Long life motor Green Technology only 50W energy consumption.
  • Silent operation. Dual powerful jet streams 35 degrees with respect to the pump axis.
  • High reliability - Use with confidence and worry free!.
Check Stock

Pipeless Jet Magnetic/Spa Pedicure Chair Motor for Luraco Magnet Jet

  • 【Pipeless Magnetic Jet For LURACO 】Fit Luraco pipeless motor magnetic jet nail pedicure spa chair, Mostly, this Jet is able to be installed in all models..
  • 【Luraco Magnet Jet】Compatible with Shiatsulogic Pedicure Chair w/Discharge Pump Pedicure Tub | Pedicure Spa Chair Nail Salon Full Function Massage Chair,Pedicure chair parts with Pipe-less Whirlpool System Pedicure Spa..
  • 【FEATURES】Luraco pipeless magnetic jet pedicure spa massage chair, Patented magnetic coupling design,Dual powerful jet streams 35 degrees with respect to pump axis,Easy to install,Super Easy to clean..
  • 【Premium Quality】Pipe-less Jet Long life motor Green Technology only 50W energy consumption,Low power consumption,Long life motor.Very quiet when running..
  • 【Luraco Magnetic Jet 】 Specifications:110VAC,Built with magnetic impeller to be used easily with liner,Need 3"1/2 hole to mount the jet in the tub..
Check Stock

Generic Screed Leveling Tripod/PVC box 20EA/ Check Height in Liquid Mortar/Fast and easy to use/The three-sided unique ruler display and two-axis folding/no corrode

  • * This product is used for liquid mortar using pump machines and hoses..
  • By measuring the laser line and floor height, this product's three-sided unique ruler is aligned with the displayed center axis for quick and easy use..
  • Several laser level machines are used as a method of use and can be used by several people, saving time and labor costs..
  • This product is made of stainless steel and ABS, so it does not corrode, and the 2-axis folding is easy to store and carry in a box..
Check Stock

OTC Tools 4247 Hendrickson Suspension Bushing Master Tool Kit

  • Reduces service time to remove and install HD rear suspension bushings substantially.
  • Works on Hendrickson Primaax EX, Comfort Air and FCCC V-Ride Pivot and D-Pin suspension bushings.
  • Tool mounts to suspension for less weight to hold.
  • Tool includes adapters to align it to bushing axis to reduce likelihood of improper installation.
  • Includes a high-force 25-ton cylinder for hard-to-remove bushings and also includes the OTC Stinger Series 2510A Air/Hydraulic Pump, with a Hose and Coupler.
Check Stock

Saltwater Fish tank

  • ...hich is easy to install and allows you to position the pump virtually anywhere in your aquarium. Small profile so it doesn't take up much space in the tank. Just suck the cupule to anywhere of the in wall, plug in the power and it works.
  • 【Wide Application】Its axis are made of wear and corrosion resistant ceramics, safe for use in fresh and salt water, various fish tanks, aquatic aquariums, coral aquariums. Dimension: 4.1 x 2.5 x 2.5 inches (L x W x H).
  • includes: 1pcs 1320 GPH aquarium wavemaker (w/1 magnet suction base, 2 suction cups). In the remote possibility that you’re not satisfied with our product, just contact us, and we will gladly give you a new Circulation Pump replacement..
Check Stock

Square D by Schneider Electric 9013GHG2J63X Pressure Switch, 200/250 psi Sensor, NEMA 1 Enclosure, 1/4\ NPSF, 140-175 psi Points, 2-Way Pressure Release Valve

  • Shafts of different colors meet the needs of different hand feelings. Approximately 50 million laboratory tests for durability, more stable and reliable quality.
  • Gateron, whose Chinese name is Jiadalon, is one of the newly-made domestic shafts. Because of the inexhaustible relationship with A, it is also called A axis. It is characterized by a dust-proof design, which some players call a dust-proof shaft. Because Gateron starts with G, I will call it G axis, and the opposite Cherry axis is C axis.
  • The G-axis contacts use a gold layer twice the thickness of the C-axis at any cost. The contacts are pressed with gold alloy instead of low-cost gold-plated contacts. The G-axis contacts are one circle larger than the C-axis, and the gold layer covers The entire contact. The shrapnel is also doubled thicker, which solves the old problem of easy bending and breaking of the C-axis pins.
  • The G-axis has a very obvious feature of enlarged shaft core. Enlarging the shaft core makes the gap between the shaft core and the shaft cover smaller, the force is more balanced, and the keys are more stable..
Check Stock

SCULPFUN S30 Pro Laser Engraver with Auto-Controlled Air Assist System, 84W Laser Engraving Cutting Machine, 10W Optical Power Laser Cutter for Home Family DIY, Ultra-Thin Carving (S30 Pro Engraver)

  • ...ng Area】 - S30 Pro laser carver adopts innovative replaceable lens, which greatly improves the service life of the laser, which is more than 10 times longer than other general lasers. When the lens is exhausted, the lens can be replaced. Besides, the primitive engraving area is 410x400mm, but you can buy a Y-axis or XY-axis expansion kit to expand the engraving area to 935x400mm or 935x905mm, which can offer you larger area for engraving or cutting work..
Check Stock