Reviews Axial Piston Motor

Walfront 12V 0.9A Water Pump Mini Self Priming Single Cylinder Piston Pump with 10 Meters Lift Portable Low Noise, Various Pumps And Accessories

  • Great practicability: Piston pump can self-prime and can output relatively large pressure.
  • Made of high quality electronic components, stable and reliable performance..
  • Improved configuration: The pump head is equipped with a check valve, which can control the fluid quality, reduce leakage and improve the working efficiency of the pump..
  • Advanced coupling structure: Adopting the coupling structure to reduce the radial and axial pressure of the motor, the motor runs more smoothly..
  • Live up to expectations: This water pump has sealed switch and coating to prevent corrosion, the body is sealed, to prevent incidental moisture and dust from entering. More resistant to corrosion and high temperatures, more durable..
  • Pump working mode: Single cylinder piston.
  • Inlet and outlet: 6MM outer diameter (6x9MM silicone tube is recommended).
Check Stock

CDHPOWER 2 Stroke LD90 Motor w/o CDI -Upgraded pk80 Motor Silver Color Engine-Gas Motorized Bicycle 66cc/80cc

  • CDHPOWER LD90 Motor w/o CDI and Excluding 2pcs anti vibration black rubber for the motor mount,upgraded pk80 motor.
  • better adjusting Clutch a little before riding..
  • Includinhg spark plug and piston kit；Excluding two head plug CDI Box ( Asin for two head plug CDI: B098Q988VJ ).
  • High hole Piston and Long connecting rod.
  • Clear up the cylinder transfer ports before assembling maybe some rough slag inside which maybe break off and cause the jamming of pistons and cylinders.
  • fully attention on screwing cylinder to the end bottom,DO NOT screw M8 bolts tightly that maybe cause drill through the end bottom so add some gasket or washer on head is better way to prevent it happen.
  • Attention on piston ring if put the piston out of cylinder, the piston rings are weak, better with right way install piston kit to cylinder.
  • FYI: the LD90 motor is compatible with all brand 2 stroke 66cc/80cc gas motor kit.
Check Stock

Karcher G2700R 2700 PSI Gas Power Pressure Washer with 4 Nozzle Attachments - 2.4 GPM

  • Outstanding Performance: A powerful Karcher KPS engine with auto choke and cast iron piston sleeve for easy starts and reliable performance, and an Aluminum Axial Direct Drive pump, the Pressure Washer delivers exceptional cleaning for most cleaning jobs.
  • The Karcher Promise - Cleaner. Quicker: With a powerful 2700 PSI/2.4 GPM TruPressure motor, the G 2700 R is perfect for cleaning concrete, pavement, driveways, patios, decks, sidewalks, RVs, cars, boats, homes, fencing, and more.
  • Versatile Cleaning Options: Includes a M22 trigger gun/zinc wand with 4 QC spray nozzles.
  • Use the 40-degree nozzle for light jobs, the 25-degree for all-around cleaning, the 15-degree nozzle for tough-to-clean surfaces, and a 65-degree detergent nozzle.
  • High-Pressure Hose: Comes equipped with a generous 25' kink-resistant high-pressure hose that offers plenty of reach, as well as an onboard hose wrap for simple storage.
  • Onboard Detergent Tank & Storage: Features 1 (.5 gallon) onboard removable detergent tank and detergent suction hose for easy soap application, and also has an onboard storage bin for accessories.
Check Stock

Ambienceo 26” 28” Black 2 Stroke 50cc 80cc Cycle Bicycle Gas Motorized Gasoline Engine Motor Kit CDI Air Cooling For Mountain and Road Bike 80cc Silver

  • CDHPOWER LD90 Cylinder Body w/Piston Kit.
  • Compatible with bottom end of all brand 2 stroke gas motor kit 66cc/80cc/pk80/LD80/LD90 including other....
  • New pk80 upgraded cylinder with piston kit, the piston kit is installed well inside of cylinder already.Excluding cylinder head..
  • Cylinder head gasket and cylinder body gasket are included.
  • The LD90 Cylinder Body and piston kit can be replacement of most 2-stroke gas motor engine such as pk80/LD80/LD90.
  • piston pin:10mmx39mm.This is a high hole piston for a 40mm stroke but with 48mm bore..
Check Stock

DONSP1986 PK80 Motor Replaement of Top End Cylinder Set and Bottom End Crank Set for 2 Stroke kit 66cc/80cc

  • PK80 Replaement of Top End Cylinder Set and Bottom End Crank Set for 2 stroke kit 66cc/80cc.
  • better adjusting Clutch a little before riding.
  • PK80 Replaement of Top End Cylinder Set and Bottom End Crank Set with AF80 connecting rod.
  • High hole Piston and Long connecting rod.
  • Clear up the cylinder transfer ports before assembling maybe some rough slag inside which maybe break off and cause the jamming of pistons and cylinders.
  • fully attention on screwing cylinder to the end bottom,DO NOT screw M8 bolts tightly that maybe cause drill through the end bottom so add some gasket or washer on head is better way to prevent it happen.
  • Attention on piston ring if put the piston out of cylinder, the piston rings are weak, better with right way install piston kit to cylinder.
Check Stock

INJORA RC Brushed Motor 050 50T Pro High Torque Motor with Motor Mount for SCX24 Gladiator Bronco C10 JLU Deadbolt Axial 1/24 Crawler Upgrade Parts

  • The new upgrade, a larger 050 size brushed motor option for the Axial SCX24..
  • 050 Motor PRO provide increased power and torque compared to the stock motor.
  • Rotor with a strong structure guarantees outstanding performance and super durability.
  • High Torque Strong Magnet, tuned for Rock Climbing.
  • Fits for Axial SCX24 Gladiator AXI90081 AXI00002 AXI00001 and so on.
Check Stock

Graco TC Pro Plus Airless Paint Sprayer

  • READY TO SPRAY: Comes with everything you need – just add disinfectant and get to work.
  • BRUSHLESS DC MOTOR: Dependable motor with spark-free operation provides ability to spray alcohol-based (flammable) chemicals.
  • FINISH SMALL JOBS FAST: Perfect for areas that require maximum portability.
  • TRIAX TRIPLE PISTON PUMP: Durable carbide piston built to deliver extended reliability and full tip support.
  • ADJUSTABLE FLOW CONTROL: Full range control delivers either complete coverage on specific objects or fine spray within an area.
Check Stock

CDHPOWER Super Motor PK80 Replaement with Iron Sleeve Cylinder 49mm Top End Cylinder Set and Bottom End Crank Set for 2 Stroke kit 66cc/80cc

  • CDHPOWER Super pk80 motor Replaement:Iron Sleeve Cylinder 49mm:Top End Cylinder Set and Bottom End Crank Set for 2 stroke kit 66cc/80cc pk80 motor kit.
  • High hole Piston kit installed well inside of cylinder and Long connecting rod AF80 or zmn80.
  • The casting cylinder head increases the horse power and this greatly cools off the engine. Would result better performance and longer life for your 2 Stroke Bicycle Engine. Casting cylinder head Height Max:51mm-52mm.
  • Clear up the cylinder transfer ports before assembling maybe some rough slag inside which maybe break off and cause the jamming of pistons and cylinders.
  • fully attention on screwing cylinder to the end bottom,DO NOT screw M8 bolts tightly that maybe cause drill through the end bottom so add some gasket or washer on head is better way to prevent it happen.
  • Attention on piston ring if put the piston out of cylinder, the piston rings are weak, better with right way install piston kit to cylinder.
Check Stock

Graco SaniSpray HP 20 Cordless Handheld Airless Disinfectant Sprayer

  • READY TO SPRAY: Comes with everything you need – just add disinfectant and get to work.
  • BRUSHLESS DC MOTOR: Dependable motor with spark-free operation provides ability to spray alcohol-based (flammable) chemicals.
  • FINISH SMALL JOBS FAST: Perfect for areas that require maximum portability.
  • TRIAX TRIPLE PISTON PUMP: Durable carbide piston built to deliver extended reliability and full tip support.
  • ADJUSTABLE FLOW CONTROL: Full range control delivers either complete coverage on specific objects or fine spray within an area.
Check Stock

FURITEK Iguana 20A/40A Brushed ESC for AXIAL SCX24 with Bluetooth Combo

  • The FURITEK IGUANA esc is designed to work with BOTH stock brushed motor and sensored/sensorless brushless motors of your favorite on the Axial SCX24 crawlers..
  • Designed with FOC (Field-oriented control) technology, it provides insane slow speed with powerful stable torque, low noise, high efficiency, and has a high-speed dynamic response..
  • And with bluetooth module option, you can run telemetry and all amazing parameters on smart phone apps..
  • The difference between this IGUANA esc and TEGU Main Board for Axial SCX24 Crawler is that the TEGU main board includes servo out for extra application and LED control capability which the IGUANA does not have. The IGUANA also has smaller BEC than the TEGU..
  • - Support sensorless brushless DC and brushed DC motor (config via app, default is brushed).
Check Stock

Mssoomm 20mm CNC Ballscrew Kit SFU2010 RM2010 Anti-Backlash Ball Screw, L 59.06 inch / 1500mm + Nut + BK/BF15 Bearing End Supports + Coupler + Nut Housing+ Motor Bracket for Nema 23 Stepper Motor

  • Nut + BK15 integrate with Motor Bracket for stepper motor Nema 23/BF15 End support with locknuts and circlips + Flexible coupler + Ball Screw Nut Housing, (The coupler bore for the motor shaft is 8mm in default),Precision C7 Grade.
  • The product can ensure motor shaft, coupling axial, axial bearing hole, and screw axis all in a line strictly, to make the transmission system run more accurately and sturdily, less noise and longer life.
  • The ballscrew is no stick-slip effect, heats up less, reduce driving power required, small starting torque, able to apply high speed and micro-feeding.
  • The material of the bk bearing support and Motor Bracket is cast steel, high hardness, shock resistance and high precision machining.
  • We can provide complete information of the products, the drawing is showed in the image 6.（If you need CAD and 3D modeling files, you could give us Amazon Message）, we have full ranges of ballscrew products, any special needs, please let us know.
Check Stock

CDHPOWER PK80 Motor Replacement of Top End Cylinder Set and Bottom End Crank Set for 2 Stroke kit 66cc/80cc

  • PK80 MOTOR REPLACEMENT PARTS ONLY. piston kit is installed well inside of cylinder already.
  • better adjusting Clutch a little before riding.
  • High hole Piston and Long connecting rod.
  • Clear up the cylinder transfer ports before assembling maybe some rough slag inside which maybe break off and cause the jamming of pistons and cylinders.
  • fully attention on screwing cylinder to the end bottom,DO NOT screw M8 bolts tightly that maybe cause drill through the end bottom so add some gasket or washer on head is better way to prevent it happen.
  • Attention on piston ring if put the piston out of cylinder, the piston rings are weak, better with right way install piston kit to cylinder.
Check Stock

Mssoomm 16mm CNC Ballscrew Kit SFU1605 RM1605 Anti-Backlash Ball Screw, L 59.06 in/1500mm + Nut + BK/BF12 Bearing End Block Supports + Coupler + Nut Housing+ Motor Bracket for Nema 23 Stepper Motor

  • Nut + BK12 integrate with Motor Bracket for stepper motor Nema 23/BF12 End support with locknuts and circlips + Flexible coupler + Ball Screw Nut Housing, (The coupler bore for the motor shaft is 6.35mm in default),Precision C7 Grade.
  • The product can ensure motor shaft, coupling axial, axial bearing hole, and screw axis all in a line strictly, to make the transmission system run more accurately and sturdily, less noise and longer life.
  • The ballscrew is no stick-slip effect, heats up less, reduce driving power required, small starting torque, able to apply high speed and micro-feeding.
  • The material of the bk bearing support and Motor Bracket is cast steel, high hardness, shock resistance and high precision machining.
  • We can provide complete information of the products, the drawing is showed in the image 6.（If you need CAD and 3D modeling files, you could give us Amazon Message）, we have full ranges of ballscrew products, any special needs, please let us know.
Check Stock