Reviews Available Steel Bushing

Penn State Industries PKSRSS Chrome Seam Ripper Kit Starter Package Woodturning Project

  • This is a woodturning project kit. Hardware and bushing set only. A LATHE IS NEEDED TO 'TURN' INTO FINISHED SEAM RIPPERS. Blanks, drill bit, and all other turning tools and supplies are not included..
  • Includes (4) Chrome Seam Ripper Woodturning Project Kits. You will receive (2) of each of the following: Single Small Blade Seam Ripper Kits in Chrome (PKSR1) and Large & Small Blade Seam Ripper Kits in Chrome (PKSR2).
  • Also includes the bushing set (PKSRBU) needed to make the seam rippers.
  • Minimum blank size needed to turn is 3/4" x 3/4" x 3-1/2".
  • Blades are removable and reversible for protection and storage.
  • The handle you 'turn' is compatible with all seam ripper, crochet, stiletto, and needle threader kits from Penn State Industries.
Check Stock

Hex Bushing 1 Male x 1/2 Female Brass for Repair Threaded Pipe Fitting Pack of 1

  • ENHANCED QUALITY BRASS Makes Hex Bushing Resistant to Corrosion and Safe for High Temperatures.
  • CONVENIENTLY DESIGNED TO CONNECT Pipes or Fittings of Different Diameter, Material, and End Type. Our Metal Hose Vacuum Gauge Hex Bushing have 1" Male....
  • RELIABLE FITTING of the Bushing Reducer is Provided by the Well-Machined Threads and the Relative Softness of the Brass that Enables Tighter Sealing.....
  • UNIVERSAL – our Hex Bushing can be easily Used with Water or Oil for Plumbing Applications, for Various Measurable Devices, Collectors, etc.
  • DURABLE –Our Hex Bushing don’t Deform with Time, unlike Traditional Stainless Steel Thread Bushing or Plastic Pipe Fittings. N.
Check Stock

Martin 3020 2 Taper Bushing, Sintered Steel, Inch, 2\ Bore, 4.25\ OD, 2\ Length

  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper bushings from various manufacturers.
Check Stock

Martin 2517 1 1/2 Taper Bushing, Sintered Steel, Inch, 1.5\ Bore, 3.375\ OD, 1.75\ Length

  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper bushings from various manufacturers.
Check Stock

Martin 1008 5/8 Taper Bushing, Sintered Steel, Inch, 0.62\ Bore, 1.386\ OD, 0.875\ Length

  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper bushings from various manufacturers.
Check Stock

Martin 2517 2 7/16 Taper Bushing, Sintered Steel, Inch, 2.44\ Bore, 3.375\ OD, 1.75\ Length

  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper bushings from various manufacturers.
Check Stock

Martin 2517 1 1/4 Taper Bushing, Sintered Steel, Inch, 1.25\ Bore, 3.375\ OD, 1.75\ Length

  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper bushings from various manufacturers.
Check Stock

Martin 2012 1 5/8 Taper Bushing, Sintered Steel, Inch, 1.63\ Bore, 2.75\ OD, 1.25\ Length

  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper bushings from various manufacturers.
Check Stock

Martin 2012 1 1/8 Taper Bushing, Sintered Steel, Inch, 1.13\ Bore, 2.75\ OD, 1.25\ Length

  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper bushings from various manufacturers.
Check Stock

DEF Door Bushing Removal Tool Hinge Liners for Wrangler JK JKU JL JLU Gladiator JT 2007-2021 (Removal Tool and 2 Pins)

  • Fit: Door Bushing Removal Tool for Wrangler JK JL 4 Door 2008-2019 ..
  • Material: Made of stainless steel, great performance and repeated use are guaranteed. High quality bushings never rust .The inserts are made of plastic..
  • Function: These door pin guides help you line up your door pins and put your doors back easily. The door bushing removal tool helps to disassemble your Wrangler corrosive hinges..
  • Usage: By using the door pin guides align the top cap and lower the door so that the bottom is in place. By using a hammer, to tap the door bushing removal tool until the OE liners are totally disassembled. If you find that it is not suitable for your car，use some type of grease or lube for the new bushings and use a rubber mallet to get them in place. Maybe it works well..
  • Package include: 1 silver door bushing removal tool, 8 bushings and 2 Pins.Door Bushing Removal Tool did not fit TJ.
Check Stock

DNM Preload MTB Mountain Bike Rear Suspension Shock Absorber AL 6061 Coil Spring 750 Lbs 160mm (6.23\) x 35mm with Extra Bushing

  • PRODUCT SPECIFICATION: Adjustments Preload, Hard Chromed Shock Ø 10 Mm ( 0.39 Inch ) Shaft.Dark Hard-anodized Al-6061 “in One Piece” Shock Body, Riding style XC / Electric wheelchair,.
  • EXTRA BUSHING INCLUDES: Top Busing Size 8mm x 24mm Bottom Bushing Size 8mm x 24mm, Includes extra bushing and hardware 8mm x 50mm Length. We Have Included An Additional Set Of Accessories To Meet The Different Size Requirements Of Some Customers Please see 2nd Pictures.
  • AVAILABLE SIZE: Available Size Eye to Eye x Travel 150 x 30 mm ( 5.9 x 1.18 inch) 160 x 35 mm ( 6.23 x 1.38 inch) 165 × 35 mm ( 6.5 × 1.38 inch) Weight: 0.2 KG(0.44 Ib) for 165 mm Lenght.
  • DNM QUALITY: ORDER NOW, WORRY FREE! Made in Taiwan We're So Confident About Our Product Quality That If You Have Any Product Issues, We’re Very Happy To Either Provide A Refund Or A Replacement On Your Purchase! We’re Also Here To Support You If You Have Any Questions Or Queries, Please Get In Touch And We’ll Gladly Help..
Check Stock

Door Pin Guides Hinge Liners and Door Bushing Removal Tool Kits (8 Door Pin Guides) 17Pcs For 2007-2020 Jeep Wrangler JK JKU JL JLU

  • DURABLE MATERIA:The Door Bushing Removal Tool was constructed with strong iron.Advanced CNC machined aircraft grade stainless steel structure guides and durable ABS plastic integral molding process bushings, anti-corrosion and never rust..
  • FITMENT:Fit for Jeep Wrangler JK, JKU, JL, JLU, Sports, Sahara, Freedom, Rubicon, Unlimited 2007-2020. (Door Bushing Removal Tool did not fit TJ).
  • WIDELY USEFUL:These door pin guides help you line up your door pins and put your doors back easily.The door bushing removal tool helps to remove your Jeep corrosive hinges.By using the door pin guides align the top cap and lower the door so that the bottom is in place. By using a hammer, to tap the door bushing removal tool until the OE liners are totally removed..
  • QUANTITY INCLUDED:8*Door Pin Guides,8*Door Hinge Liners,1*Door Bushing Removal Tool..
  • 100% SATISFACTION:If you are not satisfied with our kit,please contact us,we will try our best to solve your problem..
Check Stock

O'SKOOL Self Centering Dowel Jig Kit Drilling Guide Bushings Set Wood Wide Capacity Doweling Jig Puncher Locator Joints Tool

  • Guide hole sizes are 1/4-Inch, 5/16-Inch, 3/8-Inch, 7/16-Inch and 1/2-Inch. Package induldes: Dowel jig x1.
  • Our jig is patented and easy to adjust ,and can be clamped on boards of different thicknesses(clamping wide capacity: 3/8" to 6"). Easy to install and use. Suitable for drilling and wood board joints, it is an ideal tool for panel furniture..
  • The steel block and clamping screw handle securely tightens the tools like a vise, and the fine thread spacing of screw handle provides uniform and stable clamping pressure for clamping the workpiece. The jig with rugged aluminum sides holding work securely without damage to the wood..
  • The drilling bushing is made of high-quality materials, with high strength and accurate positioning. When using a hand held drilling machinel, the countersunk drill bushing allows the drill bit to slide into the hole easily, ensuring the correct angle of the drill bit..
  • There are 4 holes along the top of the jig, only 2 of the holes accept threaded bushings(Replaceable 1/4" 3/8" 5/16").the other two holes accept 7/16" and 1/2" drill bits..
Check Stock