Reviews Auxiliary Block

Can-Am New OEM Auxiliary Dual Battery Installation Kit 715003758

  • Allows you to add a second 30Ah battery for that dual battery setup that will give you the extra juice you’ll need to power auxiliary electrical components like a sound system or winch.
  • Equipped with an integrated smart battery isolator that will prevent your auxiliary electrical components from draining your starting battery.
  • Kit includes an additional battery junction block, all necessary wiring and the battery holder..
Check Stock

Fulton 2 Pack of Aluminum Universal Fence Clamps with a ¼ inch to 6¼ inch Clamping Capacity with Steel Threaded 3/8 inch Post

  • The Fulton Aluminum Universal Fence Clamps are the perfect solution for clamping auxiliary fences, stop blocks, setup blocks, corner clamps and more to vertical flat surfaces like fences without the clamps getting in the way. The clamp post arm fits into a 3/8” hole and is at a slight inward angle to keep the lower part of your fence or block up against a flat surface. Fitting into a hole on the top of the fence or block keeps the clamp completely out of the way unlike F-clamps or C-Clamps..
  • The versatility of these clamps allows you to use them in most any way imaginable to make your work flow quicker and easier. With these fully adjustable clamps, you can clamp stock pieces as small as ¼” and stock pieces all the way up to 6¼”. This means that you can attach your sub fences and more to most any table saw, router or even a band saw fence. You can even use these clamps to clamp blocks flat onto your workbench to act like a pseudo bench dog..
  • This pack of clamps includes two Fulton Aluminum Fence Clamps which is perfect for most fence or block applications. Two clamps also work well with 90 degree corner clamp squares with a 3/8” pre drilled hole opening on both sides of the clamping square. Some 90 degree clamping squares are plastic or a com....
Check Stock

Joric Camper Leveler 2 Packs, RV Leveling Blocks, Including Wheel Chock, RV Leveling Ramp, Rubber Grip Mats and Carry Bag, Can Withstand Campervans Weighing up to 35,000 pounds

  • Safe and Durable- Can withstand up to 35,000 pounds, using new load-bearing materials, it will not break easily, creating a safe and strong leveling block for you..
  • Dimensions- Each leveling block measu res 15.7 inch x6 inch x 4.3, used for tires no bigger than 32" diameter, easily level your trailer and easy to carry..
  • Easy to Use- Joric leveling block designed the right length , only need to accurately level the height, no need to put any auxiliary tools beside the tire, in 5 minutes easily level your trailer..
  • Non-Slip Mats- Joric leveling block with anti-slip pad, fixed leveling block, prevent the straightener from sliding, increase the friction of the ground, play a non-slip effect..
  • Contents- Package includes wheel chock, RV leveling ramp, rubber grip mats and carry bag, a travel option that suits you, If you encounter any problems, please feel free to contact us..
Check Stock

Nk1821 Yellow Professional Electric Wood Planer | Resharpenable Blades | Built-in Kickstand | Brushless Planer Keys For Removing Blades | Cutting Guide | 750-watts Use For Woodworking

  • ...ocessed quickly with high efficiency,the power is up to 7.5Amp.
  • √▲【Reversible Dust Chute】 Pressing and Pushing the yellow sawdust bin to change the direction of the outlet,also suitable for connection of both vacuum cleaner and dust bag,great convenience for work without getting sawdust on your body.
  • √▲【Auxiliary Push Handle】 The electric planer is equipped with auxiliary handles,and the dual-handle design can auxiliary push handle is separated from the depth adjustment handle to avoid unevenness of the board surface due to accidental sliding of adjustment handle.
  • √▲【All-Mirror-grade aluminum bottom & Three V-grooves】The All-Mirror-grade aluminum flat bottom plate brings high flatness and high precision.
  • 3 Chamfer grooves allows you to create angled chamfer along the edges of your wood-working projects in different size.
  • √▲【Blasde Protector】The kickstand can avoid accidental sliding when adjust knob,and prevent the blade from scratching the wood block.You can place the electric planer immediately after the shutdown to protect the blade.
Check Stock

Marsona 1288A Programmable Sound Conditioner

  • Use in a professional setting to mask confidential conversations or block out intrusive noise or at home to mask distracting noises for improved sleep....
  • There are 8 base sounds and 8 programmable overlay sounds as well as tone and volume slide controls for complete sound customization.
  • Optional 60 minute shutoff timer and simple push button operation.
  • Speakers are 3 inches and 4 ohms with an auxiliary jack for headphones or other devices.
  • Ships in Certified Frustration-Free Packaging.
Check Stock

Erie / Schneider Electric AH23A020 24V Pop Top Actuator 2Posn N.O. (2Way On

  • Sized to fit most baseboard applications.
  • Mounts directly onto the body without the need for linkages or calibration..
  • Manual override lever on normally closed actuators..
Check Stock

eSamcore Magnetic Phone Holder for Car – [Supporting Bar] Magnetic Phone Mount for Car Vent with [360° Rotatable Arm] Powerful Phone Magnet Compatible with iPhone Samsung Cell Phone

  • Double Supporting Design Car Phone Mount：Look！Our eSamcore magnetic phone mount adopts a new auxiliary supporting bar to avoid phone dropping.....
  • Never Block Air Vent & Viewing：In order not to obstruct the airflow of your a/c air vent, eSamcore phone mount for car features a 360°rotatable....
  • 4 Major Upgrades Compared to Similar Car Phone Holder：1st Improvement：The Length of hook clip upgraded from 26mm to 36mm, which can be used for....
  • 3rd Improvement：The length of the phone magnet arm is upgraded from 60mm to 80mm, which means our car phone holder has a greater range of....
  • 10 Times Holding Power: Combined with the new auxiliary support bar, our magnetic phone mount can hold 10 times the weight of an iPhone 12/ 13. Our....
Check Stock

Real Avid Accu-Punch Hammer & Punches Set with Smart Bench Block, Combo (Hammer & Brass Punches + Bench Block) red

  • ESSENTIAL WORKBENCH TOOLS designed with Real Avid’s ingenuity: Accu-Punch Hammer and Punches Set paired up with innovative Smart Bench Block.
  • BRASS AND STEEL FLAT TIP GUNSMITHING PUNCHES: standard sized, brass and steel pin punches AND PIN ALIGNMENT TOOL.
  • 1/16", 5/64", 3/32" FLAT TIP steel punches and 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 9/32" FLAT TIP brass punches 5/16" engineering resin punch.
  • AUXILIARY TOOLS: Proprietary Pin Alignment Tool and non-marring finishing punch to make common maintenance, modification and repair tasks hassle-free.
  • SMART BENCH BLOCK: non-slip, steady work surface, helps protect finish and firearm itself from causing accidental damage. MAGNETIC: captures the small pins – prevents losing pins.
Check Stock

RYOBI ONE+ HP 18V Brushless Cordless 1/2 in. Hammer Drill Kit with (2) 2.0 Ah Batteries, Charger, and Bag (PBLHM101K2)

  • Powerful drilling through concrete, brick and block with 0-31,000 BPM.
  • 2-speed gearbox provides 0 - 500 / 0 - 2,100 RPM.
Check Stock

KMFCDAE 4Runner Ditch Light Bracket LED Pods Hood Mount Brackets Compatible with Toyota 4Runner 2010+

  • Used for mounting auxiliary off-road LED Pod Work Light so to wider visible.
  • Fit between hood & cowl panel at windshield base, does not block windshield wiper.
  • Mount to hood hinge w/stock bolt, easy installation, no hardware or drilling needed.
  • CAD designed, CNC cut, bent to perfection providing a seamless fit (for 4runner 2010+).
  • Hood can fully open with light mounted. Does not affect the opening or closing of the hood.
Check Stock

Real Avid Accu-Punch Hammer & Long Punches Set with Oversized Master Bench Block

  • ESSENTIAL WORKBENCH TOOLS designed with Real Avid’s ingenuity: Accu-Punch Hammer and LONG PUNCHES Set paired up with advanced, specialized Master Bench Block.
  • AUXILIARY TOOLS: Proprietary Pin Alignment Tool and non-marring finishing punch to make common maintenance, modification and repair tasks hassle-free.
  • ACCU-PUNCH HAMMER: adjust to the situation with interchangeable hammer heads: easily switch between steel, brass, rubber, and nylon.
  • grip confidently thanks to ergonomic, rubberized handle – all to allow for maximum control and precision while tapping pins.
  • SET OF SPECIALIZED, LONG PUNCHES: Special Application, Long Punches – selection of nickel-plated steel, standard flat punches and roll pin punches, featuring extended bolt catch pin and magnetized roll pin starter. Designed to fit flush against flat surface, such as receiver..
  • MASTER BENCH BLOCK: large, non-slip, steady work surface, helps protect finish and firearm itself from causing accidental damage. MAGNETIC: captures the small pins – prevents losing pins. Includes magnetic storage solution for common size pins.
  • ADVANCED AND SPECIALIZED: purposefully contoured for standard parts and components. Allows you to work efficiently and confidently. Maximum comfort and maxmum stability f....
Check Stock

Ito Rocky Double Sheave Pulley 32 kN CE Certified Rescue Climbing Gear with Swing Plate for Progress Capture System Rigging Hauling Arborist Tree Climbing

  • ✅ Double Pulley - designed for the creation of an auto-blocking rescue winch in combination..
  • ✅ Parallel mounted sheaves and auxiliary attachment point for creating different types of hauling systems, including the most complex—mountain rescue, tower work, ski patrol or whatever requires block and tackle system..
  • ✅ Anodized light alloy Swing side plates and pulleys for easy and rapid rope installation and removal!.
  • ✅ Rating to 32kN / 7100lbs for high durability to satisfy all your requirements, like pulling your ORV or SUV from the mud, etc..
  • ✅ Compatible with wide range of ropes, up to 16mm (5/8")! Multiple anchors for complex rescue / hauling system setup!.
Check Stock

OMAX 3.5X-90X USB3 18MP Digital Trinocular Zoom Stereo Microscope on Desk Stand with 144-LED Light

  • Head: 45 degrees inclined 360 degrees rotatable trinocular.
  • Eyepieces: 30mm widefield WF10X/20 and WF20X.
  • Beam split lever enables photo-tube or left eye-tube.
  • Interpupillary distance: adjustment 2-3/16inch ~ 2-15/16inch(55mm ~ 75mm).
  • Diopter: adjustable on both ocular-tubes +/-5dp.
Check Stock