Reviews Automotive Part Mold

Copper Electroplating Kit - 1.5 Gallon

  • Our new and improved copper plating system now gives constant bright copper plating, that requires little to no polishing after plating..
  • Copper can be used to 'electroform', making complete objects from pure copper, by simply making a mold from wax & conductive powder, copper plating the mold, then melting the wax. Copper can also be formed over lead molds, and the lead melted away afterwards. This has some applications for the person wishing to reproduce decals. Copper plating requires 0.07 - 0.2 amps per square inch of part surface area. Higher current gives faster plating times. The system plates at 70°F-90°F..
  • 1 pint of automotive battery acid (not included) is required per 1.5 gallons of copper plating solution..
  • The copper plate can be applied directly over brass, copper or nickel, but cannot plate directly onto steel, pot metal, zinc or aluminum. There are no cyanides in this kit, and its operation creates no waste chemicals or dangerous fumes..
Check Stock

MadJax Apex Body Kit for EZGO RXV Golf Cart | Compatible with 2008-2022 E-Z-GO RXV Models (Colorado Slate)

  • [Full Body Kit] Includes Front Cowl, Black Grille, Rear Body with bagwell & MadJax Full LED LUX Light Kit with RGB.
  • [Designed to Fit] Modular automotive-inspired design streamlines installation and allows for easier repairs.
  • [Dynamic Color Options] Durable injection-molded body available in Mold-In Color & Two-Part Automotive Paint finishes.
  • [Compatible with RXV Accessories] Works with MadJax Genesis 150/250/300 & GTW MACH Series Rear Seat Kits along with most RXV model accessories.
  • [Note] Will work with 12-48 Volt models, other models may require additional converters.
Check Stock

OEMTOOLS 37033 5 Pound Slide Hammer Puller, Heavy Duty Automotive Versatile Use Bearing Hammer, Pull Dents, Remove Bearings and More, Chrome Plated with Carrying Case

  • Compatible: Designed for use with OEMTOOLS 27032, 27058, 27059, 27104, 27129, and 27184.
  • Works with any other attachments with the same thread.
  • Versatile: Automotive body hammers can pull gears, bearings, oil seals.
  • This heavy duty slide hammer also pulls out dents in fenders, side panels, and other vehicle body parts.
  • Efficient: Place the automotive slide hammer close to the end of the tool.
  • Then, simply pull back on the T handle, snapping the weight away from the vehicle or part.
  • Portable: Includes blow mold storage case with room to store your slide hammer hook and other attachments.
  • Essential: Among your arsenal of auto body tools, slide hammer and attachments are must haves for dent pulling, removals and deinstallations.
Check Stock

Silicone Mold Making Kit Liquid Silicone Rubber Bubble Free Translucent Clear Mold Making Silicone-Mixing Ratio 1:1-Molding Silicone for Resin Molds, Silicone Molds DIY (4kg/Gallon Kit)

  • ...anslucent liquid silicone is a safe silicone material, non-toxic and no odor, very flexible, soft and clear with a shore hardness of 15A. To add color to your molds, you can mix the mold making silicone with mica powder to create a colorful mold!.
  • Easy Mixing & Pouring - This mold making silicone rubber kit includes part A and part B, the mixing ratio is 1:1. Pour the Part A and Part B together, stir the silicone rubber thoroughly for 5 minutes for best results. Working time of 5 minutes at room temp..
  • Various Applications - Pixiss silicone for mold making is very ideal for art craft use, DIY your own resin molds, wax molds, candle molds, use to make molds for resin, wax, soap, casting, etc. ATTENTION: DO NOT USE THIS MOLD SILICONE FOR FOOD. If you have any questions about our mold making kit please feel free to reach out..
  • Beginner Friendly - If you're interested in mold making, then look no further because our mold making kit is a perfect choice for you! No prior experience is necessary. Great activity to do with friends and family that you think would be interested in smooth on silicone mold making rubber. Cleaning Steps: If there's any spill, please clean with soapy water or rubbing alcohol..
  • Bubble Free - The bubbles in your casting silicone will gr....
Check Stock

LET'S RESIN Silicone Mold Making Kit 63.48oz/3.968lbs,Non-Toxic Mold Making Silicone Rubber, Platinum Silicone Mold Maker,Clear Liquid Molding Silicone Kit for Resin Molds, Silicone Molds Making

  • PREMIUM MOLD MAKING SILICONE MATERIAL: Our translucent clear liquid silicone are made by safe silicone material, non-toxic and no odor, very flexible, soft and clear. You could color the molding silicone with mica powder to achieve new colors..
  • EASY MIXING & POURING: LET'S RESIN silicone mold making kit are 2-part silicone including part A and part B.
  • the mix ratio is 1:1 by weight (digital scale is necessary). Pour the Part A and Part B together, then slowly stir the silicone rubber about for 5 minutes, make sure to stir the mixture thoroughly for better results. The working time of liquid silicone rubber is 40~50 minutes and the complete cure time is 8~15 hours at room temperature, it varies on your mold size and thickness..
  • NO BUBBLES: The bubbles of will automatically disappear within about 2 hours, no vacuum degassing is necessary. IMPORTANT TIPS: To reduce the micro bubbles, you can slow down the curing speed. You can put it in freezer for about 1 hour while curing, then take it out and let it cure in the room temperature. Do not warm up the silicone before use, as this will cause more bubbles..
  • GREAT FOR BEGINNER: If you're new to the mold making, our mold making kit is a perfect choice for you to try! No special skills or tools are needed. You c....
Check Stock

CPR Marine Upholstery Durable Un-Backed Automotive Trim Carpet 72\ x 36\ Mini Roll Charcoal

  • Brand New Upholstery Durable un-Backened Automotive Trim Carpet Mini Roll..
  • Carpet comes in pre-cut mini rolls we can not make them bigger..
  • Material can be cut to your liking. Flexible Material Allows it to mold to almost any shape..
  • Great for automotive cargo areas. Can be used for automotive speaker boxes.Please note colors may vary slightly due to Lighting..
Check Stock

CPR Marine Upholstery Durable Un-Backed Automotive Trim Carpet 72" x 36" Mini Roll (Black)

  • Brand New Upholstery Durable un-Backened Automotive Trim Carpet Mini Roll..
  • Carpet comes in pre-cut mini rolls we can not make them bigger..
  • Material can be cut to your liking. Flexible Material Allows it to mold to almost any shape..
  • Great for automotive cargo areas. Can be used for automotive speaker boxes.Please note colors may vary slightly due to Lighting..
Check Stock

Podoy Brake Bleeder Kit Vacuum Pump Handheld 2 in 1 Test Set Tuner kit for Automotive Tuner Tools Adapters Case

  • Cushioned pistol grip handle on vacuum pump for comfort ..
  • ②We offer you 2 in 1 automotive solution include Brake Bleeder and Vacuum Pump Tester. Multi-functional vacuum pump that is used to test a variety of essential vehicle settings and operations, can also be used as vacuum bleeder for brakes..
  • Tapered barbed hose fitting for vacuum pump.
  • ④ Good sealing performance, convenient installation, exquisite design and simple operation, you can easily bleed brakes by yourself..
  • ⑤Carry Case : Made by high quality material, durable and rugged, Contained in a blow mold case for easy transportation and storage.Non original aftermarket part.
Check Stock

BioMoi Silicone Vaginal Dilator with BioCote Protection - Supports Women's Health and Wellness - Trainer Provides Protection and Relief - (Small Set)

  • 【MIX RATIO 1A:1B BY VOLUME】no scale necessary, this silicone mold making kit comes with 2 bottles, 2.86 lb kit, part A 1.43 lb, part B 1.43 lb, very easy to use, also the bottle come with tinfoil sealed inside the cap, double guarantee for no leaking.
  • 【LOW VISCOSITY FOR EASY MIXING & POURING】this BBDINO 30A mold making silicone rubber has low viscosity so that you can easily mix and pour the silicone material, no degassing needed, the molds finished with BBDINo Silicone Rubber Mold Making 30A has great flexibility & Strength. very easy to demold, this silicone mold making kit is Great for making simple one- or two-piece block molds, no vacuum degassing is necessary.
  • 【POT LIFE: 30-40 MINUTES, CURE TIME: 3-4 HOURS AT ROOM TEMPERTUARE 25℃(73.4℉)】This liquid RTV-2 mold making silicone rubber cures at room temperature with negligible shrinkage, heat cure will shorten the cure time..
  • 【PERFECT FOR ART, FOOD AND INDUSTRIAL APPLICATION】BBDINO silicone rubber is a platinum grade additional RTV-2 silicone rubber, which is widely used for mold making of arts crafts, like casting Resins, Wax, Gypsum, Concrete, Soap, Candle and also can be used as Molds Making for Candy, Chocolate, Cake and Ice Cubes.
  • 【LONG SHELF LIFE & VIVID COLOR】Our BBDINO ....
Check Stock

LET’S RESIN Flexible Silicone Mold Making Kit, 43oz Liquid Platinum Silicone Rubber w/Mold Housing, Mixing Cups, Fast Cure Mold Making Silicone for Casting Resin Molds & Silicone Molds(Translucent)

  • ...liquid silicone for mold making is platinum-cured silicone, non-toxic and odorless, with negligible shrinkage, designed for making excellent flexibility and high tear resistance silicone molds.
  • meaning it will last years if taken care of properly..
  • 【Easy Mixing & Pouring】: This silicone molds making kit includes part A and part B with mix ratio 1:1 by weight.
  • Pour the equal Part A and Part B together, then stir the silicone rubber for 3 minutes, very easy to use, no special skills or tools are needed.
  • make sure to scrape the bottom and the sidewalls of the mixing cup to ensure thoroughly mixed..
  • 【Wide Application】: LET’S RESIN high-performance mold making silicone rubber is idea for making highly-detailed molds as well as 3D silicone molds.
  • very ideal for art craft use, casting material like resin, wax, gypsum, soap, candle, polymer clay, easily make your own silicone molds. Translucent clear color allow you to mix with letsresin mica powder, chameleon powder, and even glow-in-the-dark pigment to create a unique color shade and offer you more DIY fun..
Check Stock

LET’S RESIN 8oz Silicone Mold Making Trial Kit, Fast Cure Mold Making Silicone Rubber, Easy Mixing, Flexible Platinum Cured Molding Silicone for Casting Resin Molds & Silicone Molds (Translucent)

  • ...liquid silicone for mold making is platinum-cured silicone, non-toxic and odorless, with negligible shrinkage, designed for making excellent flexibility and high tear resistance silicone molds.
  • meaning it will last years if taken care of properly..
  • 【Easy Mixing & Pouring】: This silicone molds making kit includes part A and part B with mix ratio 1:1 by weight.
  • Pour the equal Part A and Part B together, then stir the silicone rubber for 3 minutes, very easy to use, no special skills or tools are needed.
  • make sure to scrape the bottom and the sidewalls of the mixing cup to ensure thoroughly mixed..
  • 【Wide Application】: LET’S RESIN high-performance mold making silicone rubber is idea for making highly-detailed molds as well as 3D silicone molds.
  • very ideal for art craft use, casting material like resin, wax, gypsum, soap, candle, polymer clay, easily make your own silicone molds. Translucent clear color allow you to mix with letsresin mica powder, chameleon powder, and even glow-in-the-dark pigment to create a unique color shade and offer you more DIY fun..
Check Stock

Silicone Mold Making Kit, Mold Making Silicone Rubber,Platinum Liquid Silicone Mold Making Rubber, 1:1 by Volume, Ideal for Casting Resin Molds Silicone Molds DIY N.W 2.2 lb(Persimmon)

  • ...ber, which is widely used for mold making of arts crafts, like casting Resins, Wax, Gypsum, Concrete, Soap, Candle and also can be used as Molds Making for Candy, Chocolate, Cake and Ice Cubes.
  • 【MIX RATIO 1A:1B BY VOLUME】no weighing scale necessary, this silicone mold making kit comes with 2 bottles, 2.2 lb kit, part A 1.1 lb, part B 1.1 lb, very easy to use, also the bottle come with tinfoil sealed inside the cap, double guarantee for no leaking.
  • 【LONG SHELF LIFE & VIVID COLOR】Our Sipolysun silicone mold making kit has a very long shelf life of over 12 months, you can easy save the rest materials for next time using by cover the cap back, no waste at all, and Sipolysun Silicone 15 Slow designed with a stunning Persimmon Color, you can easily see whether part A and B mixed evenly enough and also you will make your arts and molds in a unique and beautiful Color!.
Check Stock

Silicone Mold Making Kit, Mold Making Silicone Rubber 30A, Platinum Silicone Mold Making Rubber, 1:1 by Volume, Ideal for Casting Resins Molds & Silicone Molds N.W 2.2 lb (Sapphire Blue)

  • ...LIFE & VIVID COLOR】Our Sipolysun silicone mold making kit has a very long shelf life of over 1 year, you can easy save the rest materials for next time using by cover the cap back, no waste at all, and Sipolysun Silicone Mold Making 30A designed with a stunning Sapphire Blue Color, you can easily see whether part A and B mixed evenly enough and also you will make your arts and molds in a unique and beautiful Color!.
  • 【MIX RATIO 1A:1B BY VOLUME】no weighing scale necessary, this silicone mold making kit comes with 2 bottles, 2.2 lb kit, part A 1.1 lb, part B 1.1 lb, very easy to use, also the bottle come with tinfoil sealed inside the cap, double guarantee for no leaking.
  • 【PERFECT FOR ART, FOOD AND INDUSTRIAL APPLICATION】Sipolysun silicone rubber is a platinum grade additional RTV-2 silicone rubber, which is widely used for mold making of arts crafts, like casting Resins, Wax, Gypsum, Concrete, Soap, Candle and also can be used as Molds Making for Candy, Chocolate, Cake and Ice Cubes.
  • 【SHORE A 30 & LOW VISCOSITY FOR EASY MIXING & POURING】this SIPOLYSUN 30A mold making silicone rubber has low viscosity so that you can easily mix and pour the silicone material, no degassing needed, the molds finished with Sipolysun Silicone Rubbe....
Check Stock