Reviews Automotive Mufflers

Permatex 80334 1000 Degree Plus Exhaust Repair Kit, Single Unit

  • Permatex 1000 Plus, Exhaust Repair Kit With Bandage And Support Wire, Complete Kit For Repairing Cracks In Mufflers, Tailpipes And Exhaust Pipes.
  • These Are Complete Line Of Heavy-Duty Shop Products.
  • Through Creativity, Productivity And Innovation - This Brand Continues To Develop The Finest Automotive Accessories.
  • Complete kit for repairing cracks and splits in mufflers, tailpipes and exhaust pipes.
  • Kit contains ready-to-use foil-packed bandage and support wire.
Check Stock

Rust-Oleum 249340 Automotive High Heat Primer Spray Paint, 12 Ounce (Pack of 1), Gray

  • High heat primer spray paint is designed for use on metal surfaces such as automotive engines, mufflers and more.
  • Oil based paint with Stops Rust formula provides rust resistant base coat for cars, trucks and other vehicles.
  • Covers up to 12 sq ft, dries to the touch in 30 minutes and can be topcoated in 1 hour.
  • Spray paint offers outstanding heat resistance for metal surfaces up to 2000°F.
  • Flat finish can be covered with any topcoat with superior adhesion.
  • Specially formulated to prevent rust and is recommended for use on automotive engines and other metal surfaces which reach intermittent temperatures up to 2000°F (1093°C)..
  • Ideal for mufflers, head pipes and engine blocks.
  • For best appearance, top coat with Rust-Oleum High Heat Paint.
  • Any-angle spray technology allows the can to be sprayed in any direction, even upside down.
  • This item is not for sale in Catalina Island.
Check Stock

J-B Weld FiberWeld 2\ x 36\ Automoitve Repair Cast, Black (38237)

  • FIBERWELD AUTOMOTIVE REPAIR CAST: A high-strength fiberglass wrap, impregnated with a specially-formulated resin for automotive repairs. When activated by water, the product forms a strong, permanent bond that hardens like steel in 15 minutes. Once cured, FiberWeld is temperature resistant up to 400°F and holds water pressure up to 100 PSI..
  • SOAK IT, WRAP IT, DONE: Once the wrap is dipped in water for 5-7 seconds, FiberWeld Automotive Repair Cast has a working time of about 5 minutes and a cure time of 15 minutes! The product achieves full strength in about 2 hours..
  • PRODUCT FEATURES AND STRENGTH: Once fully cured, J-B Weld FiberWeld Automotive Repair Cast has a temperature resistance of 400°F, holds water pressure up to 100 PSI, and can be sanded and painted!.
  • AUTOMOTIVE APPLICATIONS: Radiator & heater hoses, tailpipes & mufflers, oil & transmission lines, vacuum lines, outside mirrors & roof racks, and RV & boat emergency repairs..
  • EVERYTHING YOU NEED: The kit includes a pair of gloves and a 2" x 24" securing bandage!.
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..
Check Stock

NEW FLOWMASTER SUPER 10 SERIES CHAMBERED MUFFLER,BLACK,3" OFFSET IN-CENTER OUT

  • Brand New Flowmaster Super 10 Series Chambered Muffler, Black Paint Finish, 3" Offset In & Center Out (Holley Part #843016).
  • Flowmaster Super 10 Series 409S Stainless Steel, Single Chamber mufflers are intended for customers who desire the loudest & most aggressive sound they can find. Because these mufflers are so aggressive, they are recommended only for off highway use & not for street driven vehicles..
  • These mufflers utilize the same patented Delta Flow technology that is found in other Flowmaster Super series mufflers to deliver max performance. Super 10 Series mufflers are constructed of 16-gauge 409S stainless steel & fully MIG-welded..
  • Features: Flowmaster Reliability | 409SS Stainless Steel Construction | Super Aggressive Sound | Flowmaster Chambered Technology.
  • NOTE: Universal Muffler - Not a direct fit. Some adaptation required..
Check Stock

Delkevic US Forestry Approved Spark Arrestor for 13" and longer Delkevic Oval and Tri-Oval Mufflers

  • Compatible with Delkevic street bike mufflers.
  • Fits first generation 13" tri-oval mufflers with turn down outlet. Does not fit tapered end cap..
Check Stock

Zouminyy Pneumatic Drill Air Drill 3/8 1700Rpm HighSpeed Pneumatic Drill Reversible Rotation Air Drill Tool For Hole Drilling

  • [PRO POWER]: Powerful small drill motor delivers 2600 RPM free speed for superior performance in various applications at the workshop, automotive....
  • [QUALITY]: High quality rotor and bearings come with a convenient 3/8-inch no-key (keyless) chuck feature to change bits quickly during high speed....
  • [DURABLE: Lightweight, composite housing design is compact and easy to hold withstanding heavy duty action at 3 CFM air consumption and 90 PSI..
  • [DESIGN]: Built-in noise control mufflers in rear handle exhaust is connected to the air compressor producing low noise output limiting distraction....
  • [APPLICATION]: Ideal for use on low speed, high torque applications in drilling, sanding, brushing and polishing job types..
Check Stock

NEW FLOWMASTER SUPER 10 SERIES CHAMBERED MUFFLER,3.00" CENTER IN,3.00" CENTER OUT,BLACK FINISH

  • Brand New Flowmaster Super 10 Series Chambered Muffler, 3.00" Center In, 3.00" Center Out, Black Finish (Holley Part #843015).
  • Super 10 Series 409S stainless steel, single chamber mufflers. Intended for customers who desire the loudest & most aggressive sound that they can find. Because these mufflers are so aggressive, they are recommended only for off highway use & not for street driven vehicles..
  • These mufflers utilize the same patented Delta Flow technology that is found in other Flowmaster Super series mufflers to deliver maximum performance. Constructed of 16 gauge 409S stainless steel & fully MIG welded for maximum durability..
  • Features: Intended only for off-road or race applications | Delta Flow Technology | 409SS Stainless Steel Construction | Super 10 Sound Level.
  • NOTE: Universal Muffler - Some adaptation may be required..
Check Stock

Speedway 2.5" Mild Steel DIY Custom Mandrel Exhaust Pipe Bend Kit w/Mufflers

  • Premium 16-gauge steel construction of both tubing and mufflers to provide long lasting performance.
  • Each tube is expanded on one end to allow easy slip fit installation.
  • 2.5" mandrel bent tubing is full size throughout the bend for maximum flow and increased power.
  • Two chamber mufflers with twin baffles to reduce drone and interior noise while maintaining a deep powerful tone.
  • Mufflers are offset inlet and center outlet configuration to fit a variety of muscle car and hot rod applications.
Check Stock

Speedway 2.25" Mild Steel DIY Custom Mandrel Exhaust Pipe Bend Kit w/Mufflers

  • Premium 16-gauge steel construction of both tubing and mufflers to provide long lasting performance.
  • Each tube is expanded on one end to allow easy slip fit installation.
  • 2-1/4" mandrel bent tubing is full size throughout the bend for maximum flow and increased power.
  • Two chamber mufflers with twin baffles to reduce drone and interior noise while maintaining a deep powerful tone.
  • Mufflers are offset inlet and center outlet configuration to fit a variety of muscle car and hot rod applications.
Check Stock

Delkevic Stubby 14" Stainless Steel Oval Muffler

  • This is a slip on muffler and is not bike specific. We manufacture 300+ motorcycle specific pipes, we do not guarantee this muffler fits any specific model. Please search our products for bike specific fitment..
  • Delkevic Stubby 14" stainless steel oval mufflers are manufactured from high-grade 304 stainless steel polished to a mirror finish. These mufflers give a decent increase in sound over the stock muffler but can be fairly quiet in lower RPM..
  • This set includes all necessary hardware to mount the muffler onto the engine. Gaskets are included..
  • No rejetting or remapping is required after fitment on a stock bike however we always recommend a dyno test. If the motorcycle has other modificaitons to the intake or exhaust system some tuning may be required..
  • Delkevic mufflers are handcrafted from the finest quality materials to enhance your motorcycle in both performance and looks..
Check Stock

Delkevic Aftermarket Exhaust compatible with Yamaha FJR1300 13.5" Titanium XOval Muffler Slip On 01-05

  • Delkevic 13.5 inch *Stubby* x-oval titanium mufflers are made from high grade titanium. Along with adding a unique style and look, these mufflers are extremely lightweight,higher performance, and more durable than factory standard exhausts. They create a deep, crisp sound..
  • This set includes all necessary hardware to mount the muffler onto the engine. Gaskets are included..
  • No rejetting or remapping is required after fitment on a stock bike however we always recommend a dyno test. If the motorcycle has other modificaitons to the intake or exhaust system some tuning may be required..
  • Delkevic mufflers are handcrafted from the finest quality materials to enhance your motorcycle in both performance and looks..
Check Stock

Delkevic Aftermarket Slip On compatible with Honda ST1300 (2003-2015) with 18" Carbon Fiber Oval Muffler

  • Delkevic 18" carbon fiber oval mufflers are manufactured from a pre-formed carbon fiber composite sleeve and 304 stainless steel. This muffler has the quietest, deepest tone of mufflers we offer. This will be the closest sounding to stock available and best for long haul trips..
  • This set includes all necessary hardware to mount the muffler onto the engine..
  • No rejetting or remapping is required after fitment on a stock bike however we always recommend a dyno test. If the motorcycle has other modificaitons to the intake or exhaust system some tuning may be required..
  • Delkevic mufflers are handcrafted from the finest quality materials to enhance your motorcycle in both performance and looks..
Check Stock

Delkevic Aftermarket Slip On compatible with Honda ST1300 (2003-2015) with 18" Stainless Steel Oval Muffler

  • Delkevic 18" stainless steel oval mufflers are manufactured from high-grade 304 stainless steel and polished to a mirror finish. This muffler is has the deepest, quietest tone of mufflers we offer. It will be the closest sounding to stock and the best choice for long haul trips..
  • This set includes all necessary hardware to mount the muffler onto the engine..
  • No rejetting or remapping is required after fitment on a stock bike however we always recommend a dyno test. If the motorcycle has other modificaitons to the intake or exhaust system some tuning may be required..
  • Delkevic mufflers are handcrafted from the finest quality materials to enhance your motorcycle in both performance and looks..
Check Stock