Reviews Automobile Part Mold

Tilex, Mold and Mildew Remover Spray - 32 oz (Pack of 4)

  • CLR Mold and Mildew Clear is a Bleach-free stain remover that has a foam sprayer that allows for a more direct application.
  • Quickly remove tough surface mold and mildew stains on a wide variety of surfaces throughout the home, including ceramic tile, baseboards, fabrics, glass, brick, concrete, natural stone, laminated countertops, fully cured and oil-based painted surfaces, hard plastics, automobile tires, wood, grout and fiberglass..
  • Should not be used on metals or finishes, especially stainless steel appliance exteriors..
Check Stock

10pcs Thread Repair Sleeves Reducer Nuts M8 Female and M12 Male Thread Conversion

  • USES - The repair nut is an industrial fastening part, which is mostly used with screws or bolts. If a thread error occurs or a damaged threaded hole is repaired, the repair nut can be used to repair the threaded hole in an efficient manner..
  • WIDE RANGE OF APPLICATION - These Repair Nuts are widely used in aviation, automobile, electronic communication, computer, mold, mechanical equipment and other manufacturing fields..
  • FEATURES - The thread size is standard, the thread is clear, and it will be more accurate for thread sliding tooth restoration..
  • FOR EXAMPLE - If the M8 thread is slippery, and if you want to continue to use the M8 thread after the restoration, use this method to first expand the M8 thread to the M10 thread, and then use the M8-M10-12 length reducer to change it back to M8, because the material of this reducing diameter is stainless steel, it will make the M8 thread more firm.
Check Stock

HoMedics TotalClean 4-in-1 Portable Air Purifier, Small Spaces, Removes Bacteria, Allergens, Dust, Germs, 360- Degree HEPA-Type Filter, UV-C Light Technology, Activated Carbon Reduces Odors (White)

  • Breathe Clean: 360-degree HEPA-type filtration removes up to 99 percent of airborne allergens as small as 2.0 microns.
  • Trusted UV-C Light: UV-C technology and HEPA-type filtration reduce 99.9 percent of bacteria, virus, mold, and fungus.
  • Portable Purifier: Great anywhere from your home to car to office.
  • this portable air purifier fits in standard automobile cup holders for on-the-go use.
  • Customized Programming: Breathe easy with 2 whisper-quiet speed settings.
  • accent lighting adds a soft glow to any space.
  • Quality You Can Trust: The filter lasts 2-3 months under normal usage conditions.
  • easy to replace when needed for optimal performance. The replacement filter Part is ( AP-P60FL).
Check Stock

Silicone Mold Making Kit Liquid Silicone Rubber Bubble Free Translucent Clear Mold Making Silicone-Mixing Ratio 1:1-Molding Silicone for Resin Molds, Silicone Molds DIY (4kg/Gallon Kit)

  • ...anslucent liquid silicone is a safe silicone material, non-toxic and no odor, very flexible, soft and clear with a shore hardness of 15A. To add color to your molds, you can mix the mold making silicone with mica powder to create a colorful mold!.
  • Easy Mixing & Pouring - This mold making silicone rubber kit includes part A and part B, the mixing ratio is 1:1. Pour the Part A and Part B together, stir the silicone rubber thoroughly for 5 minutes for best results. Working time of 5 minutes at room temp..
  • Various Applications - Pixiss silicone for mold making is very ideal for art craft use, DIY your own resin molds, wax molds, candle molds, use to make molds for resin, wax, soap, casting, etc. ATTENTION: DO NOT USE THIS MOLD SILICONE FOR FOOD. If you have any questions about our mold making kit please feel free to reach out..
  • Beginner Friendly - If you're interested in mold making, then look no further because our mold making kit is a perfect choice for you! No prior experience is necessary. Great activity to do with friends and family that you think would be interested in smooth on silicone mold making rubber. Cleaning Steps: If there's any spill, please clean with soapy water or rubbing alcohol..
  • Bubble Free - The bubbles in your casting silicone will gr....
Check Stock

LET'S RESIN Silicone Mold Making Kit 63.48oz/3.968lbs,Non-Toxic Mold Making Silicone Rubber, Platinum Silicone Mold Maker,Clear Liquid Molding Silicone Kit for Resin Molds, Silicone Molds Making

  • PREMIUM MOLD MAKING SILICONE MATERIAL: Our translucent clear liquid silicone are made by safe silicone material, non-toxic and no odor, very flexible, soft and clear. You could color the molding silicone with mica powder to achieve new colors..
  • EASY MIXING & POURING: LET'S RESIN silicone mold making kit are 2-part silicone including part A and part B.
  • the mix ratio is 1:1 by weight (digital scale is necessary). Pour the Part A and Part B together, then slowly stir the silicone rubber about for 5 minutes, make sure to stir the mixture thoroughly for better results. The working time of liquid silicone rubber is 40~50 minutes and the complete cure time is 8~15 hours at room temperature, it varies on your mold size and thickness..
  • NO BUBBLES: The bubbles of will automatically disappear within about 2 hours, no vacuum degassing is necessary. IMPORTANT TIPS: To reduce the micro bubbles, you can slow down the curing speed. You can put it in freezer for about 1 hour while curing, then take it out and let it cure in the room temperature. Do not warm up the silicone before use, as this will cause more bubbles..
  • GREAT FOR BEGINNER: If you're new to the mold making, our mold making kit is a perfect choice for you to try! No special skills or tools are needed. You c....
Check Stock

Alpha Rider 100pcs 8mm Fender ATV Push Retainer Clips Fastener for Honda Suzuki Kawasaki Polaris Sportsman Rangers Rzr Replace 7661855

  • 【Fitments】Fit for Honda: Rancher, Foreman ,Rubicon, Rincon, Trx680, Trx650, Trx500, Trx450, Trx400, Trx350, Trx300, Trx250, 250Ex, 300Ex, 400Ex,....
  • 【Perfect replacement 】Replace 7661855 & Made of High Quality Plastic.
  • 【Broad Application】For automobile fenders, bumpers, doors or other automobile surfaces..
  • 【Easy Installation】Insert the female part into the hole and push the male part to the bottom to close the position..
  • 【Size】Max Diameter: 15mm / 0.59", Total Length: 25mm / 0.98", Stem Length: 22mm / 0.86".
Check Stock

HoMedics TotalClean 4-in-1 Portable Air Purifier, Small Spaces, Removes Bacteria, Allergens, Dust, Germs, 360- Degree HEPA-Type Filter, UV-C Light Technology, Activated Carbon Reduces Odors, Black

  • Breathe Clean: 360-degree HEPA-type filtration removes up to 99% of airborne allergens as small as 2.0 microns.
  • Trusted UV-C Light: UV-C technology and HEPA-type filtration reduce 99.9% of bacteria, virus, mold, and fungus.
  • Portable Purifier: Great anywhere from your home to car to office.
  • this portable air purifier fits in standard automobile cup holders for on-the-go use.
  • Customized Programming: Breathe easy with 2 whisper-quiet speed settings.
  • accent lighting adds a soft glow to any space.
  • Quality You Can Trust: The filter lasts 2-3 months under normal usage conditions.
  • easy to replace when needed for optimal performance. The replacement filter Part # is ( AP-P60FL).
  • What’s in the Box: (1) HoMedics TotalClean 4-in-1 Portable Air Purifier.
  • (1) Instruction Book, (1) USB Power Cable.
Check Stock

BioMoi Silicone Vaginal Dilator with BioCote Protection - Supports Women's Health and Wellness - Trainer Provides Protection and Relief - (Small Set)

  • 【MIX RATIO 1A:1B BY VOLUME】no scale necessary, this silicone mold making kit comes with 2 bottles, 2.86 lb kit, part A 1.43 lb, part B 1.43 lb, very easy to use, also the bottle come with tinfoil sealed inside the cap, double guarantee for no leaking.
  • 【LOW VISCOSITY FOR EASY MIXING & POURING】this BBDINO 30A mold making silicone rubber has low viscosity so that you can easily mix and pour the silicone material, no degassing needed, the molds finished with BBDINo Silicone Rubber Mold Making 30A has great flexibility & Strength. very easy to demold, this silicone mold making kit is Great for making simple one- or two-piece block molds, no vacuum degassing is necessary.
  • 【POT LIFE: 30-40 MINUTES, CURE TIME: 3-4 HOURS AT ROOM TEMPERTUARE 25℃(73.4℉)】This liquid RTV-2 mold making silicone rubber cures at room temperature with negligible shrinkage, heat cure will shorten the cure time..
  • 【PERFECT FOR ART, FOOD AND INDUSTRIAL APPLICATION】BBDINO silicone rubber is a platinum grade additional RTV-2 silicone rubber, which is widely used for mold making of arts crafts, like casting Resins, Wax, Gypsum, Concrete, Soap, Candle and also can be used as Molds Making for Candy, Chocolate, Cake and Ice Cubes.
  • 【LONG SHELF LIFE & VIVID COLOR】Our BBDINO ....
Check Stock

LET’S RESIN Flexible Silicone Mold Making Kit, 43oz Liquid Platinum Silicone Rubber w/Mold Housing, Mixing Cups, Fast Cure Mold Making Silicone for Casting Resin Molds & Silicone Molds(Translucent)

  • ...liquid silicone for mold making is platinum-cured silicone, non-toxic and odorless, with negligible shrinkage, designed for making excellent flexibility and high tear resistance silicone molds.
  • meaning it will last years if taken care of properly..
  • 【Easy Mixing & Pouring】: This silicone molds making kit includes part A and part B with mix ratio 1:1 by weight.
  • Pour the equal Part A and Part B together, then stir the silicone rubber for 3 minutes, very easy to use, no special skills or tools are needed.
  • make sure to scrape the bottom and the sidewalls of the mixing cup to ensure thoroughly mixed..
  • 【Wide Application】: LET’S RESIN high-performance mold making silicone rubber is idea for making highly-detailed molds as well as 3D silicone molds.
  • very ideal for art craft use, casting material like resin, wax, gypsum, soap, candle, polymer clay, easily make your own silicone molds. Translucent clear color allow you to mix with letsresin mica powder, chameleon powder, and even glow-in-the-dark pigment to create a unique color shade and offer you more DIY fun..
Check Stock

DTTRA 2PCS Non Lock-Out Knob Plunger Stubby Hand Retractable Spring Plunger with Pull Ring

  • Material: Stainless steel, durable and practical..
  • Size: 37.5*10.*6mm/1.47*0.4*0.23 in Thread M6 Thread length: 12mm Pin outer diameter: 4mm..
  • The basic parts or accessories of a machine..
  • Mainly used in mold, chassis, cabinet, industrial equipment, electrical appliances, automobile and other fields..
Check Stock

LET’S RESIN 8oz Silicone Mold Making Trial Kit, Fast Cure Mold Making Silicone Rubber, Easy Mixing, Flexible Platinum Cured Molding Silicone for Casting Resin Molds & Silicone Molds (Translucent)

  • ...liquid silicone for mold making is platinum-cured silicone, non-toxic and odorless, with negligible shrinkage, designed for making excellent flexibility and high tear resistance silicone molds.
  • meaning it will last years if taken care of properly..
  • 【Easy Mixing & Pouring】: This silicone molds making kit includes part A and part B with mix ratio 1:1 by weight.
  • Pour the equal Part A and Part B together, then stir the silicone rubber for 3 minutes, very easy to use, no special skills or tools are needed.
  • make sure to scrape the bottom and the sidewalls of the mixing cup to ensure thoroughly mixed..
  • 【Wide Application】: LET’S RESIN high-performance mold making silicone rubber is idea for making highly-detailed molds as well as 3D silicone molds.
  • very ideal for art craft use, casting material like resin, wax, gypsum, soap, candle, polymer clay, easily make your own silicone molds. Translucent clear color allow you to mix with letsresin mica powder, chameleon powder, and even glow-in-the-dark pigment to create a unique color shade and offer you more DIY fun..
Check Stock

Silicone Mold Making Kit, Mold Making Silicone Rubber,Platinum Liquid Silicone Mold Making Rubber, 1:1 by Volume, Ideal for Casting Resin Molds Silicone Molds DIY N.W 2.2 lb(Persimmon)

  • ...ber, which is widely used for mold making of arts crafts, like casting Resins, Wax, Gypsum, Concrete, Soap, Candle and also can be used as Molds Making for Candy, Chocolate, Cake and Ice Cubes.
  • 【MIX RATIO 1A:1B BY VOLUME】no weighing scale necessary, this silicone mold making kit comes with 2 bottles, 2.2 lb kit, part A 1.1 lb, part B 1.1 lb, very easy to use, also the bottle come with tinfoil sealed inside the cap, double guarantee for no leaking.
  • 【LONG SHELF LIFE & VIVID COLOR】Our Sipolysun silicone mold making kit has a very long shelf life of over 12 months, you can easy save the rest materials for next time using by cover the cap back, no waste at all, and Sipolysun Silicone 15 Slow designed with a stunning Persimmon Color, you can easily see whether part A and B mixed evenly enough and also you will make your arts and molds in a unique and beautiful Color!.
Check Stock

Silicone Mold Making Kit, Mold Making Silicone Rubber 30A, Platinum Silicone Mold Making Rubber, 1:1 by Volume, Ideal for Casting Resins Molds & Silicone Molds N.W 2.2 lb (Sapphire Blue)

  • ...LIFE & VIVID COLOR】Our Sipolysun silicone mold making kit has a very long shelf life of over 1 year, you can easy save the rest materials for next time using by cover the cap back, no waste at all, and Sipolysun Silicone Mold Making 30A designed with a stunning Sapphire Blue Color, you can easily see whether part A and B mixed evenly enough and also you will make your arts and molds in a unique and beautiful Color!.
  • 【MIX RATIO 1A:1B BY VOLUME】no weighing scale necessary, this silicone mold making kit comes with 2 bottles, 2.2 lb kit, part A 1.1 lb, part B 1.1 lb, very easy to use, also the bottle come with tinfoil sealed inside the cap, double guarantee for no leaking.
  • 【PERFECT FOR ART, FOOD AND INDUSTRIAL APPLICATION】Sipolysun silicone rubber is a platinum grade additional RTV-2 silicone rubber, which is widely used for mold making of arts crafts, like casting Resins, Wax, Gypsum, Concrete, Soap, Candle and also can be used as Molds Making for Candy, Chocolate, Cake and Ice Cubes.
  • 【SHORE A 30 & LOW VISCOSITY FOR EASY MIXING & POURING】this SIPOLYSUN 30A mold making silicone rubber has low viscosity so that you can easily mix and pour the silicone material, no degassing needed, the molds finished with Sipolysun Silicone Rubbe....
Check Stock