Reviews Automation Hardware
Aeotec Range Extender 7, Zwave Extender and Repeater (One Pack)
- WIRELESS ZWAVE REPEATER- Amplifies and repeats weak signals boosting the range and reliability of weak Z-Wave / Z-wave Plus devices. 250% further wireless range.
- 50% FASTER Z-WAVE COMMUNICATION- Built upon Aeotecs unique Gen7 hardware and firmware stack, stable performance, achieving seamless automation.
- SECURITY 2 SYSTEM COMPATIBLE- This particularly means it can amplify and repeat signals from security focussed devices, including door locks and smoke sensors.
- SMARTSTART QR CODE- Simplest possible device installation. Compatible with Zwave hub including Control4, Fibaro, SmartThings, Vera and more..
- Easy as plug and play. Start your smart home here. Z-Wave Plus certified. Certification number: ZC12-19080007.
Check StockTreedix Breakout Board Module with Pin Board for Teensy 4.1/3.5/3.6 Compatible with Arduino
- The breakout board expands the connection with all the processor functions, the circuit board is well-made, gold-plated on both sides to prevent oxidation.
- Simple and easy to assemble, it can be used in conjunction with a breadboard, the distance between the holes on the board is 2.54mm.
- Widely compatible: all pins on the breakout board are accessible, and can be used in conjunction with Arduino IDE and Arduino compatible hardware.
- Use this breakout board module to easily extend Tennsy 4.1 project to industrial control, home automation or other applications.
- Note: The package is not include teensy development board.
Check StockDeegoo-FPV NEW 12pcs NRF24L01+ 2.4GHz Arduino Wireless RF Transceiver Module
- Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability, Particularly suitable for industrial control applications..
- 125 Communications channels, Multi-point communication and frequency hopping to meet the communication needs..
- Built-in hardware CRC error detection, Multipoint communication address control. Built-in 2.4Ghz antenna..
- nRF24L01 is a single chip radio transceiver for the worldwide 2.4 - 2.5 GHz ISM band. Compatible with Arduino and Raspberry Pi..
- Applications: wireless peripherals, remote control systems such as RC vehicles and consumer remote electronics, wireless voice transmission such as VoIP, wireless sensor networks, wireless networks, home and commercial automation..
Check StockLogitech Harmony Ultimate Home [Discontinued by Manufacturer]
- Powerful home entertainment and automation control: One remote easily controls entertainment devices plus connected lights, locks, thermostats, blinds, sensors, and more.
- Intuitive color touch screen: Simply swipe and tap to control channels, movies, 50 customizable channel Favorites and home automation devices such as Philips hue lights or Nest Learning Thermostat.
- Harmony app: Turns iOS or Android smartphones or tablets into a second, personal universal remote control.
- Closed cabinet control: Included Harmony Home Hub lets you control devices in closed cabinets.
- Simple setup on computer or mobile app for control of 15 home entertainment devices and unlimited home automation devices: Works with over 270,000 devices, including your TV, satellite or cable box, Blu-ray player, Apple TV, Roku, Sonos, game consoles, Philips hue lights and more..
Check StockOSOYOO Smart House IoT Starter Kit for Arduino MEGA2560,Learning STEM Electronic Engineering Coding Programming, DIY Home Automation Building Set for Teens Adults
- LEARN HOW TO CODE, PROGRAM & AUTOMATE: Start learning about electronics and home automation to improve your knowledge of coding, programming, and electronic automation systems. This Kit is ideal for highschool students, college coding courses, STEM teaching aids, science fairs, summer camps, hands-on centres, science clubs, self study, and anything related to STEM education..
- COMPLETE STARTER KIT: This is a starter kit for learning electronics, programming, IoT, and home automation. Based on the Arduino mega2560..
- INCLUDES TUTORIALS: Learn how to assemble, code, program, and automate each home feature and device with easy to follow step-by-step tutorials. All the necessary programs, libraries, codes, software and driver installation files are also included in this starter pack..
- APP CONTROL FEATURES:Use OSOYOO IoT APP to remotely control devices.please download it by searching 'OSOYOO iot udp robot car app' from Apple Store or Google Play Store(Android device)..
- INCLUDES EVERYTHING YOU NEED: Includes Everything You Need To Build & Engineer Your IoT Home Kit: Wooden House Mo....
Check StockGE Enbrighten Add-On Switch for GE Z-Wave/GE Zigbee Smart Lighting Controls, Works with Alexa, Google Assistant, NOT A STANDALONE SWITCH, Toggle, 12728
- ...e of your favorite smart-device functions from multiple locations..
- ULTIMATE FLEXIBILITY – Compatible with any GE-branded smart control to operate lights or devices from multiple locations. The add-on switch sends commands to the connected in-wall Z-Wave or Zigbee switch, dimmer or fan control for full use of home automation features in 3-way configurations. For easy installation, the add-on switch only requires neutral, traveler and ground wires. It cannot be used as a standalone switch..
- Requires a GE Home Automation Switch. This is NOT a standalone switch. (This product is an add-on only switch, and requires an existing GE Home Automation Switch to function. Without a GE Home Automation Switch, the Add-On Switch WILL NOT OPERATE.).
- MULTI-SWITCH OPERATION – Easily replace any in-wall control in a multi-switch configuration to support the features of the primary smart device to which it is connected. Up to four add-on switches can be added to a smart switch or dimmer to operate fixtures from as many as five locations..
- COMPATIBLE DEVICES – The add-on switch mirrors the functions of the primary smart device. It offers ON/OFF control when paired with a switch, dims when connected to a dimmer, adjusts speed when used with a fan control and many ....
Check StockGE Dimmer, Single Pole, Slide On/Off, White 52129
- ...s. The dimmer adjusts brightness levels of dimmable LED, CFL, incandescent and halogen lights from 0-100 percent to reduce energy costs and improve bulb life. Control the device remotely with your smartphone and voice commands when connected to a compatible hub or enjoy manual ON/OFF operation from the dimmer. Home automation is simple through custom scenes, versatile scheduling and convenient alerts..
- 3-WAY READY – The smart device operates perfectly on its own or seamlessly integrates into multi-switch setups with required add-on switches – models 12723 or 46199. Up to four add-on switches can be connected to the same device..
- FULL-HOME COVERAGE – Z-Wave Plus works with all previous Z-Wave generations to allow continued expansion of your home-automation network. The dimmer is capable of controlling indoor or outdoor fixtures for whole-home automation and repeats your Z-Wave signal from your hub or other devices to extend your range by up to 150ft. Extended signal range increases your home automation coverage to enhance your control..
- EASY INSTALLATION – Requires indoor in-wall installation with hardwired connections. NEUTRAL WIRE REQUIRED. Includes white and light almond paddles (wall plate not included). Full-range dimmability for use with di....
Check StockGE Enbrighten Z-Wave Plus 1000-Watt Smart Dimmer, No Neutral Wire Required, Halogen/Incandescent Bulbs Only, Works with Alexa/Google Assistant, ZWave Hub Required, White & Light Almond, 14299
- ...rtThings, Ring Alarm, Wink, ADT Pulse, ADT Command, Trane, Vivint, Nexia, Honeywell, Home Seer, Harmony Home Hub Extender, Vera and more..
- IDEAL FOR OLDER HOMES – A neutral wire is not required for installation of the indoor, hardwired dimmer making it ideal for old as well as many new homes not designed with home automation in mind. The dimmer provides full-range dim ability by adjusting the brightness of incandescent and halogen lights from 0-100 percent to reduce energy costs and improve bulb life. Easily replace any standard in-wall switch to remotely turn ON/OFF, adjust lighting brightness and create schedules for a wide range of fixtures. Control the device remotely with your smartphone and voice commands when connected to a compatible hub. Home automation is simple through custom scenes, versatile scheduling and convenient alerts..
- 3-WAY READY – The smart device operates perfectly on its own or seamlessly integrates into multi-switch setups with required add-on switches – models 12723 or 46199. Up to four add-on switches can be connected to the same device..
- FULL-HOME COVERAGE – Z-Wave Plus works with all previous Z-Wave generations to allow continued expansion of your home-automation network. The dimmer is capable of controlling ind....
Check StockSamplitude Music Studio - Version 2020 [PC Download]
- Virtual music production studio with virtual instruments, sounds & loops.
- NEW! Automation Lanes for optimal control and overview of track automation data.
- NEW! Plug-in browser to locate plug-ins faster.
Check StockMad Mike, Da Bear Warrior
- can function as a standalone device, as an accessory to a home automation controller, or it may be used as another automation system's component.
Check StockWiz Kids Dungeons & Dragons Nolzur's Marvelous Unpainted Miniatures Bundle: Warforged Monk W14 + Warforged Barbarian W14 + Warforged Rogue W14
- This 35mm tall Automation has a great amount of detail for dungeon-crawling, RPGs and table top war games..
- This 35mm tall Automation has a great amount of detail for dungeon-crawling, RPGs and table top war games. Miniature could be used as a War forger, Golem, Repair, steampunk, Fighter, Artificer. Robot. This Automation is equipped with an Oversized Mechanic.
- Included with each mini is a slotted round plastic "creator" base. This base is not designed as a plug and play solution and requires some assembly and finishing (glue, putty, or other filler is recommended). Figure is made of 100% lead free pewter..
- The pictures of the painted miniatures are for inspiration and are only examples..
- Miniatures come unassembled and unpainted, some filing may be needed to clean up excess flashing, or sprue. Choking hazard - Not suitable for children 14 and under..
Check StockGE 14291 Enbrighten Z-Wave Plus Smart Light Switch, Works with Alexa, Google Assistant, SmartThings, Zwave Hub Required, Repeater/Range Extender, 3-Way Ready 1st Gen, White & Light Almond
- ...ngs, Ring Alarm, Wink, ADT Pulse, ADT Command, Trane, Vivint, Nexia, Honeywell, Home Seer, Harmony Home Hub Extender, Vera and more..
- HASSLE-FREE OPERATION – Control the device remotely with your smartphone and voice commands when connected to a compatible hub or enjoy manual ON/OFF operation from the switch. Home automation is simple through custom scenes, versatile scheduling and convenient alerts..
- 3-WAY READY – The smart device operates perfectly on its own or seamlessly integrates into multi-switch setups with required add-on switches – models 12723, 12728, 46199 or 46200. Up to four add-on switches can be connected to the same device..
- FULL-HOME COVERAGE – Z-Wave Plus works with all previous Z-Wave generations to allow continued expansion of your home-automation network. The switch is capable of controlling indoor or outdoor fixtures for whole-home automation and repeats your Z-Wave signal from your hub or other devices to extend your range by up to 150ft. Extended signal range increases your home automation coverage to enhance your control..
- EASY INSTALLATION – Requires indoor in-wall installation with hardwired connections. NEUTRAL WIRE REQUIRED. Includes white and light almond paddles (wall plate not included). Works with all LED, CFL,....
Check StockGE Enbrighten Z-Wave Plus Smart Toggle Light Switch, On/Off Control, in-Wall, Built-in Repeater/Range Extender, Zwave Hub Required, Works with SmartThings Wink and Alexa, 14292
- ...ings, Ring Alarm, Wink, ADT Pulse, ADT Command, Trane, Vivint, Nexia, Honeywell, HomeSeer, Harmony Home Hub Extender, Vera and more..
- HASSLE-FREE OPERATION – Control the device remotely with your smartphone and voice commands when connected to a compatible hub or enjoy manual ON/OFF operation from the switch. Home automation is simple through custom scenes, versatile scheduling and convenient alerts..
- 3-WAY READY – The smart device operates perfectly on its own or seamlessly integrates into multi-switch setups with required add-on switches – models 12728 or 46200. Up to four add-on switches can be connected to the same device..
- FULL-HOME COVERAGE – Z-Wave Plus works with all previous Z-Wave generations to allow continued expansion of your home-automation network. The switch is capable of controlling indoor or outdoor fixtures for whole-home automation and repeats your Z-Wave signal from your hub or other devices to extend your range by up to 150ft. Extended signal range increases your home automation coverage to enhance your control..
- EASY INSTALLATION – Requires indoor in-wall installation with hardwired connections. NEUTRAL WIRE REQUIRED. Wall plate not included. Works with all LED, CFL, incandescent and halogen bulbs as well as other devices....
Check Stock