Reviews Automatic Rebar Tying Tool

DNYSYSJ Automatic Rebar Tying Machine, 8-34mm Hand Held Rebar Bender Machine Tool Kit, for Civil Building, Foor Pipe, Heating Floor Mesh, Steel Bar w/Pliers+ Charger (Orange)

  • ★Labor-saving -- Compact size, lightweight, easy to grab. It can save 3-5 times than man power by hand. Reasonable structure, advanced craft, simple and convenient operation, high efficiency and convenient maintenance..
  • ★Performance -- It is a miniature motor tool has the trait of safety and credibility. Rebar Tier is a hand held machine used to pack rebars quickly..
  • ★Specifications -- Material: Plastic + Metal.
  • Battery Charging Time: 1.5 hours full filling.
  • Applicable Scope Of Steel Strapping: 8mm - 34mm.
  • Knot The Required Time: 0.8 seconds at a time.
  • Machine Size: 275 mm * 65 mm * 240 mm / 10.83''x2.56''x9.45''(appr.).
  • ★Operating Skills -- 1. In use, the left tilt 45 degrees after banding, the next time the banding into a right tilt 45 degrees banding, left and right alternately banding. 2. When the machine is about to tighten, the machine will appear slightly shaking, while holding the hand of the machine not too tight, you can relax properly..
Check Stock

MAKO 1.5” Rebar Support Chair with Flat Base (Pack of 800) – Fits Bar Sizes 3-5 – Heavy Duty & Durable Plastic Concrete Rebar Stand Holder with Snap-in Mount

  • SAVE TIME & LABOR COSTS with MAKO Rebar Chair. They support and stabilize the rebar mats and allow for quick rebar grid setup time, thanks to their easy-to-use snap-lock design. Your reinforced gridwork will be placed more quickly and efficiently..
  • VALUE PACK OF 500: The concrete rebar chairs are available in a bulk pack of 500 pieces, making them a premium yet value for money addition to your construction project. They provide stability, are easy to install and get the job done..
  • SECURE & CONVENIENT DESIGN: Our rod chair rebar features a wide, flat base that provides a stable surface and prevents them from tipping off during pouring. Plus, the rod securely snaps into the chair, which eliminates the need for tying and saves a lot of your time. The rebar chairs are made from recycled plastic and color may vary..
  • WIDE APPLICATION: Our durable rebar support chairs can be used for at grade or precast applications to support #3 through #6 rebar or post-tension cable. Non-conductive construction makes them ideal to use in bridge decks and power plant projects..
Check Stock

MAKO 3” Rebar Support Chair with Flat Base (Pack of 500) – Fits Bar Sizes 3-5 – Heavy Duty & Durable Plastic Concrete Rebar Stand Holder with Snap-in Mount (color may vary)

  • SAVE TIME & LABOR COSTS with MAKO Rebar Chair. They support and stabilize the rebar mats and allow for quick rebar grid setup time, thanks to their easy-to-use snap-lock design. Your reinforced gridwork will be placed more quickly and efficiently. We use recycled plastic to mold the rebar chairs so the color of the chair may vary..
  • VALUE PACK OF 500: The concrete rebar chairs are available in a bulk pack of 500 pieces, making them a premium yet value for money addition to your construction project. They provide stability, are easy to install and get the job done..
  • SECURE & CONVENIENT DESIGN: Our rod chair rebar features a wide, flat base that provides a stable surface and prevents them from tipping off during pouring. Plus, the rod securely snaps into the chair, which eliminates the need for tying and saves a lot of your time..
  • WIDE APPLICATION: Our durable rebar support chairs can be used for at grade or precast applications to support #3 through #5 rebar or post-tension cable. Non-conductive construction makes them ideal to use in bridge decks and power plant projects..
  • HEAVY-DUTY CONSTRUCTION: Our concrete rebar chairs are made of durable and heavy-duty polypropylene, so they are guaranteed to never rust, break, snag or crack. The rebar chairs are non....
Check Stock

KwikSafety (Charlotte, NC) PINZA Ironworker Pliers Spring Loaded Action Side Cutters Steel Rebar Cut Diagonal Wire Cutters Bi-Material Tempered Handles & Aggressive Cross-Hatched Knurl Lineman Pliers

  • PEAK PERFORMANCE - The PINZA Lineman Pliers designed to cut & twist rebar tie wire. Heavy duty wire cutters made from alloy steel (no rust pliers)! Industrial handle tempering absorbs the "snap" when cutting. Features deep knurl channels to provide a strengthened grip power for twisting & pulling. Rebar wire pliers w/ induction hardened knives for easy cuts & longer life. Durable plastic-dipped handles w/ a polymer rubber coat for greater grip & (1) 135° bent handle for added pulling leverage..
  • RELIABLE SIDE CUTTER PLIERS - These linesman pliers feature a spring loaded handle for self-opening & an angled head design for better rebar tying performance. Lightweight rebar pliers (12 oz total weight) w/ an overall length of 9.19in (23.3 cm). Square nose side cutter linemans pliers w/ jaw thickness dimensions of 1.28in (3.3 cm) x 1.156in (2.9 cm) & a knife length of 0.625in (1.6 cm). High leverage design & hot riveted joint ensures a greater cutting tool & gripping power (NO handle wobble)!.
  • UTILITY STEEL PLIERS - The KwikSafety PINZA ironworkers pliers combine secure jaw grip w/ powerful cutting & features more plier cutter power over standard cutting pliers. The perfect cutters pliers for the home, workshop or jobsite! Long "handform" handles & heavy-dut....
Check Stock

Happybuy 900W Electric Rebar Bender 5/8Inch 16mm Hydraulic Electric Hand Held Rebar Bender Machine for Bending Steel Rope

  • Integral Hydraulic Cutter 7/8": It is a manual integral hydraulic rebar cutter, through the pump to generate pressure, to cut rebar, easy to operate. Max. Cutting Diameter: 7/8". This tool is suitable only for Rebar..
  • Durable Construction: The cutting head of this rebar cutting tool is made of high strength forged steel with high hardness. The rebar cutter blades have been through special heat treatment, having a good expansion ability..
  • Thickened Cylinder 13 Ton: It is a manual integral hydraulic cutter tool, through a 13 tons cylinder to generate pressure, with good tightness and no oil leakage, to generate pressure, to produce large force for rebar cutting. The one-person operation, save your time and energy..
  • Convenient Operation:Thickened, anti-slip, and insulated handles give you comfortable and safe using experience, suitable for long-lasting use. Durable design and exquisite workmanship make it fit for your needs. The rebar cutter is easy to store with a toolbox offered..
  • Professional Purpose: Hydraulic rebar cutters are widely used in construction, electricity, transportation, oil, metallurgy, and other areas where it is necessary to cut the rebar..
Check Stock

Crescent H.K. Porter Rebar Cutter and Bender - 0590RBJN

  • Pure Copper Motor: A pure copper motor ensures higher reliability and excellent motivation yet low noise. Moreover, it is more durable with less power consumption and low noise to extend the service life..
  • Excellent Performance: This portable rebar bender bending rebar up to 5/8'' (#5) grade 60 from 0-130 degrees within 5 seconds. It satisfies your various bending demand and raises your working efficiency significantly..
  • Solid Machine Body: Study and durable machine body and head can stand super-hard rebar with strong clamping force, which can help to reduce the waste of steel rebar. Multiple screws fixed on the head enforce the security..
  • Detachable Positioning Bolt: The Rebar Bender with adjustable positioning bolt allows you to accurately bend any angle within 0-130 degrees, preset angle for repeating the same angle bend..
  • Humanized Design: This portable automatic rebar bender features an ergonomic back grip design with two handles that facilitate maneuverability, ease of use, and security. Simply Keeping the switch pressed, the bending block starts to push forward..
Check Stock

LTM CONCRETE Snap Rebar Chairs 2 inch (30 Pack) – Quick, Easy & Durable Support – Bar Sizes 3-5 - Heavy Duty Plastic Spacers - Made in USA

  • HEAVY DUTY: LTM Snap Rebar Chairs are built with a special blend of materials that support heavy loads and strengthen your pour. Our chairs will never rust, corrode or degrade inside the concrete..
  • VERSATILE: Our easy-to-use clips firmly hold bar sizes #3-5.
  • post-tension cables, smaller bars and mesh will easily rest inside them too..
  • EASY TO USE: LTM Snap Rebar Chairs are already inexpensive, but you’ll save even more in labor costs. Set an entire rebar grid in minutes and skip wire-tying altogether..
  • MADE IN USA: The entire LTM Concrete product line is made in the USA, including 100% of our raw materials. Buy LTM and keep America working..
  • ***NOTE: These chairs are built specifically to work in forms and on hard-packed surfaces. Their minimal footprint will sink if used on sand and other soft-earth applications..
Check Stock

LTM CONCRETE Snap Rebar Chairs 1.5 inch (30 Pack) – Quick, Easy & Durable Support – Bar Sizes 3-5 - Heavy Duty Plastic Spacers - Made in USA

  • HEAVY DUTY: LTM Snap Rebar Chairs are built with a special blend of materials that support heavy loads and strengthen your pour. Our chairs will never rust, corrode or degrade inside the concrete..
  • VERSATILE: Our easy-to-use clips firmly hold bar sizes #3-5.
  • smaller bars and mesh will easily rest inside them too..
  • EASY TO USE: LTM Snap Rebar Chairs are already inexpensive, but you’ll save even more in labor costs. Set an entire rebar grid in minutes and skip wire-tying altogether..
  • MADE IN USA: The entire LTM Concrete product line is made in the USA, including 100% of our raw materials. Buy LTM and keep America working..
  • NOTE: These chairs are built specifically to work in forms and on hard-packed surfaces. Their minimal footprint will sink if used on sand and other soft-earth applications..
Check Stock

Mophorn Rebar Tie Wire Coil 10 Rolls, Rebar Tie Tool 0.8mm Diameter, Rebar Tying Wire 110m Length, Rebar Wire for Automatic Rebar Tying Machine Supplies

  • Dedicated Device: It is suitable for various brands of rebar tiers on the current market, and ensures efficient performance without wire being jammed.
  • Premium Material: This rebar wire is made of high-quality low carbon steel. Through an elaborate process of drawing molding, acid pickling, high-temperature annealing, hot galvanizing, and cooling, the coated zinc layer is thick and corrosion-resistant..
  • Sustainable Lifecycle: The reusable wire spool is thickened and reinforced, which is not easy to crack the coil, and avoids the problem of getting rebar wire entangled.
  • the high-strength axle is uneasy to be damaged and has a longer service life..
  • Easy to Use: With good toughness and elasticity, it does not crack after repeated bending, which is easy to be shaped.
  • the wire coil is firmly bound, light in weight, convenient for transportation, and does not occupy space.
  • the rebar wire is finely polished with advanced technology, and the burr-free surface does not hurt hands..
  • Wide Application: Whenever you're thinking of tying wire, you will find it set a must-have for your work with various features. It is best for woven wire mesh, handicrafts, gardening, product ....
Check Stock

Helium Tank with 50 Balloons and White Ribbon + 12 Gold Balloon Weights + Plus Balloon Tying Tool

  • Light Weight and Portable design. Easily create a warm atmosphere.This balloon inflator commonly used in some activities/festive/party/celebration/decoration..
  • Size: 20 x 15 x 12 (cm). Type: manual, automatic one. Pressure: 18000pa-22000pa, 1.75psi. Input voltage :110-120V. Frequency: 50/60Hz..
  • Product weight: 1.3KG. Color: Rose red. Air volume 750 (L/min). Power: 600W. Package Include: 1 x Balloon Air Pump, 2 x Balloon Tying Tool,1 x User Manual, Free Gift 2Pcs Tying Tool.
  • This electric balloon pump fit to latex balloon and decorative balloon. Double pump, balloon air pump. Balloon pump has two modes: manually and automatically..
  • 1-year warranty and lifetime support provided by iDaodan..
Check Stock

ID IDAODAN Portable Dual Nozzle Rose Red 110V 600W Electric Balloon Blower Pump/Electric Balloon Inflator for Decorations

  • Light Weight and Portable design. Easily create a warm atmosphere.This balloon inflator commonly used in some activities/festive/party/celebration/decoration..
  • Size: 20 x 15 x 12 (cm). Type: manual, automatic one. Pressure: 18000pa-22000pa, 1.75psi. Input voltage :110-120V. Frequency: 50/60Hz..
  • Product weight: 1.3KG. Color: Rose red. Air volume 750 (L/min). Power: 600W. Package Include: 1 x Balloon Air Pump, 2 x Balloon Tying Tool,1 x User Manual, Free Gift 2Pcs Tying Tool.
  • This electric balloon pump fit to latex balloon and decorative balloon. Double pump, balloon air pump. Balloon pump has two modes: manually and automatically..
  • 1-year warranty and lifetime support provided by iDaodan..
Check Stock

CCTI Rebar Tie Wire - 16 Gauge Black Soft Annealed 3.5 lb. Roll (Approx 340 Ft) - 1 Pack

  • Premium Quality - Soft Annealed Rebar Tie Wire.
  • Roll Dimension: OD 4.6" - Width 5.5" - Round Hole 1.9".
Check Stock

YWFTING Electric Air Balloon Pump and Balloon Tying Tool in One, Portable Dual Nozzle Rose Red 110V 600W Electric Balloon Blower Pump for Decoration, Party,Faster and Save Time

  • Protect Your Hands--You do not have to put your fingers through the tying tool like the common one, this design brings great help and your hands will not feel sore for long-time working..
  • Super Time-Saving--Electric balloon air pump with a balloon tying tool, easy to use, inflates fast and easy tying, and commonly used in some activities/ festival/ party/ wedding/ birthday/ celebration/ decoration. Save your time and energy..
  • Lightweight and Portable--This balloon air pump has suitable size and portable design. The wire storage keeps the pump good-looking and tidy, and the cable will not cause trouble when the pump is not being used..
  • 2 Operation Modes and 2 Extension Nozzles--This product provides manual and automatic pumping modes, with a fast and consistent inflation rate to ensure inflation efficiency. It comes with 2 extra extension nozzles to inflate smaller round balloons..
  • Notice--If you have any any any problems after receiving our product, message us by clicking our store(not brand, do not click the wrong position), and ask a question. we will try our best to help you..
Check Stock