Reviews Auto Water Pump Seals

Rule 500 GPH 25SA Electronic Sensing Bilge Pump-500

  • Head: 4.0M, Wire Lead: 1M, Outlet Dia: 29mm(1-1/8"), Dimension: 5.92“*4.21"/150.5mm*107mm..
  • 【Switch】Built-in float switch: No float switch required.Pump turns on when water level rises & shuts off when water is removed. Snap-off strainer for easy cleaning.
  • 【Long life motor】 :Water cooled motors for long life, with anti airlock design and moisture tight seals.Heavy duty motors with stainless steel shafts and tough thermoplastic bodies..
  • 【Durable】: All (Auto) Bilge Pumps are built with compact, rust and corrosion protected stainless steel shaft, high-impact durable and thermoplastic ABS plastic housing..
  • 【Fast Speed】When water level rises,pump can turn on bout 1 1/2 inch when it’s sitting in the bottom of the bilge at the back of the boat. It definitely pumps the water out fast! 5 Gallons underneath motor and the pump spit it out in about 20 seconds..
Check Stock

Johnson Pumps - 22102 PROLINE Bilge Pump 1000 GPH 2.5A

  • No one wants to worry that their boat is slowly taking on water because the bilge pump has failed. Well, you can sleep soundly with the reliable 2000 bilge pump on the job.Small size, high efficiency, low current (low cost switching power supply supporting).
  • to achieve a small size perfect combination of high flow..
  • It is non-automatic and must be paired with a float switch or sensor and ON/OFF/AUTO switch. Unique automatic "discharge" function can bear the long-term continuous operation under nearly congestion condition Impact resistant ABS housing.
  • Used in a boat,you can also use it in solar powered waterfall for your backyard, in a battery back-up sump system,etc. It empties the bilge roughly 25% faster than 1500gph bilge pump,and will continue to pump even when it encounters some minor debris.
  • Heavy duty motors with stainless steel shafts and tough. thermoplastic bodies submersible bilge pumps are tough enough for any bilge.Tough, efficient, long life motor.Offer high capacity output Water cooled long-life motors.
  • Ignition protection Water/moisture tight seals.
  • Snap lock strainer base for easy installation and removal.
Check Stock

Amarine Made 12V 1100 GPH Auto Submersible Boat Bilge Water Pump with Float Switch 3/4 inch Outlet, Automatic All-in-one 3.2A Ignition Protected Marine Emergency Pump for Saltwater Freshwater

  • Head: 2.5M, Wire Lead: 1M, Outlet Dia: 28.5mm(1-1/8"), Dimension: 155*90*115mm.
  • ✔Built-in float switch:Compact, automatic, fully submersible electric pump,Built-in float switch! (No separate float switch is needed).
  • ✔Long life motor :Water cooled motors for long life, with anti airlock design and moisture tight seals.Heavy duty motors with stainless steel shafts and tough thermoplastic bodies..
  • ✔Durable: All (Auto) Bilge Pumps are built with compact, rust and corrosion protected stainless steel shaft, high-impact durable and thermoplastic ABS plastic housing..
  • ✔No power use until pump is activated by internal float switch (when water level rises).Pump turns on when water level rises & shuts off when water is removed. Snap-off strainer for easy cleaning.
Check Stock

Wayne 57729-WYNP WAPC250 Pool Cover Pump, Blue

  • Pool Cover Maintenance - The WAYNE 1/4 HP Reinforced Thermoplastic Pool Cover Pump is a great addition to your pool maintenance. WAYNE model WAPC250 has iSwitch technology, which activates the pump once the water level is at, or above 2 1/8”. Auto Off deactivates the pump when water is at or below 3/4".
  • Automatic Pumping - Water level must be at least 2-1/8” for the pump to turn on, prime, and operate. Water levels less than 2-1/8” won’t activate the iSwitch to start the pump, so manual activation will be needed.
  • Efficient Design - Energy efficient, high flow, oil-free pump. Easy on/off allows you to plug in and leave the pump unattended for worry-free water removal all winter long. Automatic freeze protection within the iSwitch technology helps prevent pump damage.
  • Additional Features - The strainer base filters out debris to minimize clogging and keeps the pump from tipping over. 25-foot power cord and 25-foot "pull-to-shore" rope included to help position the pump on the pool cover. Includes a 3/4" garden hose adapter and check valve to reduce repetitive cycling.
  • Quality You Deserve - Proudly assembled in the USA for quality you can trust. Warrantied for 3 years for dependable, efficient, performance. This Auto Off pump will NOT run dry.
Check Stock

Small Block Chevy Overhaul Gasket Set, 350 Chevy, 67-'85

  • Application Range: It fits 1957-1979 small block 283, 307, 327, 350 and 383 V8 engines with a 2 piece rear main seal and left hand oil pan dipsticks. It includes all the necessary gaskets and seals for one complete engine repair..
  • Application Range: It fits 1957-1979 small block Chevy 283, 307, 327, 350 and 383 V8 engines with a 2 piece rear main seal and left hand oil pan dipsticks. It includes all the necessary gaskets and seals for one complete engine repair..
  • Premium Quality: Gaskets provide a reliable means of repairng your engine for your daily street cruiser, tow vehicle, street rod, circle track, dirt track, and drag strip performance racing engines.
  • Gasket set includes the following pieces: Cylinder head gaskets, intake manifold gaskets, valve cover gaskets, exhaust manifold gaskets, timing cover gasket, timing cover seal, oil pan gaskets, water pump gaskets, fuel pump gasket, thermostat water outlet housing gaskets, distributor gasket, o ring valve stem seals, and rear main seal..
Check Stock

Athena Parts Water Pump Gasket Kit with Bearings for KAWASAKI KX 250 F 2004-2008, SUZUKI RMZ 250 2004-2006, black

  • Includes every gasket, O-ring, bearing, and seal required to rebuild a water pump..
  • Typical kit includes the following -Bearings where applicable. -Rubber Seals. -Mechanical Water pump seal where applicable. -Side cover gasket. -Water pump gasket. -Snap rings located on water pump shaft. -Copper drain washers..
Check Stock

AISIN TKT-002 Engine Timing Belt Kit with Water Pump

  • AISIN's Water Pump/Timing Belt Service Kit is the common-sense combo as these components should always be replaced at the same time regardless of which component needs replacement.
  • The work involved in replacing one of these components is about the same as replacing all of them - save yourself time and money in the long run by replacing all components at the same time.
  • AISIN's kit includes OE matched components, just like the ones your vehicle left the assembly line with - no generic parts here, just the brand names you know and trust - AISIN, Mitsuboshi, Toyo, NTN, and more.
  • AISIN is the #1 OE manufacturer of water pumps in the world.
  • each pump features an advanced diecast aluminum housing and premium internal components with carbon ceramic seals for superior durability.
  • Kit includes OE matched components: Water Pump, Timing Belt, Pulleys, Gaskets, Seals, and Installation Instructions - all packed in one convenient box, ready to install.
  • Compatible with select Toyota vehicles (verify specific fitment details with fit checker above): 1987-01 Camry, 1987-89,92-99 Celica, 1996-00 RAV4, 1999-01 Solara.
Check Stock

Fire Apparatus Driver/Operator: Pump, Aerial, Tiller, and Mobile Water Supply

  • 【REPLACE PART NUMBER】 Water pump & gasket : 16100-09201丨 Hydraulic tensioner : 13540-50030丨 Thermostat : 90916-03100丨 Tensioner roller / pulley : 13503-0F010 / 13503-50011 | Idler roller / pulley : 13505-0F010 / 13505-50030丨 Front camshaft seals : 90311-38065丨 Front crankshaft seal : 90311-A0001丨 Timing belt : 13568-09070丨 Serpentine drive belt :90916-02586.
  • 【FIT FOR LEXUS】 1998-2000 GS400 丨 2001-2007 GS430 丨 2003-2009 GX470 丨 1990-2000 LS400 丨 2001-2006 LS430 丨 1998-2007 LX470 丨 1992-2000 SC400 丨 2002-2010 SC430.
  • 【FIT FOR TOYOTA 】 2003-2009 4RUNNER 丨1998-2007 LAND CRUISER 丨2001-2009 SEQUOIA 丨 2000-2009 TUNDRA.
  • 【WHAT WILL YOU GET】 1*Water Pump Gasket丨 1*Hydraulic Tensioner 丨1* Thermostat 丨 1*Tensioner Roller丨 1*Idler Roller丨 2*Front Camshaft Seals丨 1* Front Crankshaft Seal丨 1*Timing Belt丨 1*Serpentine Drive Belt丨 Totally 10 Pieces Set of Timing Belt Water Pump Kit.
  • 【SALE SERVICE】 Please Check Carefully Whether the Oe Number of Our Product Is Applicable to Your Vehicle‘s Model Before Purchasing. Whenever I....
Check Stock

Acquaer 1/2HP Submersible Utility Pump, 3030GPH Stainless Steel Sump Pump, Water Removal for Basement Hot Tub Pool Cover Draining, 30ft Cord

  • Effective and Powerful performance: Pumps water 1.9X faster than other pumps. With its open impellers, the flow rate can be up to 3600 GPH with a maximum lift up capacity of 30FT. This 1/2 HP submersible water pump can quickly remove standing water, preventing the flooding damage. The pump can handle various types of water including clear water, rainwater, spring water, river water, lake water and other types of water (with up to 1/4" Diameter Solids)..
  • Effortless water removal driven by the US patented Auto-Flo Technology: The water pump is turned on as soon as Auto-Flo detects a water level of 2" (about 50.8 mm). Auto-Flo shuts down the pump when the water level falls below the normal level, protecting the motor from burns caused by dry running..
  • Knock Over Operation & Dry Run Protection: It works continuously even if it is accidentally knocked over. When the surrounding water level falls below the sensors or a blockage occurs, the Auto-Flo will turn the pump off, preventing dry running causing machine failure..
  • 6 Adaptors (2*2”,1-1⁄2”,1-1⁄4”,1”, 3⁄4”): 6 adaptors depending on the urgency and speed required for draining water. Our largest 2'' adapters need 2'' water pipes to achieve a max 3600 GPH of pumping water, which requires a 2''....
Check Stock

YaeMarine 12V 800gph Livewell Baitwell Pumps Live Bait Tank Aerator Pump Submersible Cartridge Boat Bilge Pump

  • The internal anti-airlock fins ensure even flow of water to your livewell Smaller profiles to fit in more confined spaces, The cartridge is easy to remove for cleaning or replacement..
  • Pump is fully submersible and utilizes tin-coated, 16-gauge wire for safety 90° threaded intake, 125mm long Includes two different outlet hose tail configurations - Straight and 90°..
  • Water cooled motors for long life, with anti airlock design and moisture tight seals. Stainless steel shafts suitable for fresh or salt water, Extra length for thicker transom..
  • High-impact durable plastic housing Extremely efficient, very low current draw and offer high capacity output Water cooled long-life motors..
  • Totally submersible and ignition protected, Ignition protection to protect the pump against high current Water/moisture tight seals Silent and vibrationless operation Anti-airlock protection..
Check Stock

AISIN TKT-021 Engine Timing Belt Kit with Water Pump, grey

  • AISIN's Water Pump/Timing Belt Service Kit is the common-sense combo as these components should always be replaced at the same time regardless of which component needs replacement.
  • The work involved in replacing one of these components is about the same as replacing all of them - save yourself time and money in the long run by replacing all components at the same time.
  • AISIN's kit includes OE matched components, just like the ones your vehicle left the assembly line with - no generic parts here, just the brand names you know and trust - AISIN, Mitsuboshi, Toyo, NTN, and more.
  • AISIN is the #1 OE manufacturer of water pumps in the world.
  • each pump features an advanced diecast aluminum housing and premium internal components with carbon ceramic seals for superior durability.
  • Kit includes OE matched components: Water Pump, Timing Belt, Tensioner, Pulleys, Gasket, Seals, and Installation Instructions - all packed in one convenient box, ready to install.
  • Compatible with select vehicles (verify specific fitment details with fit checker above): LEXUS: 1998-00 GS400, 2001-07 GS430, 2003-09 GX470, 1998-00 LS400, 2001-06 LS430, 1998-07 LX470, 1998-00 SC400, 2002-10 SC430.
  • TOYOTA: 1998-07 Land Cruiser, 2001-09 Sequoia, 2000-09 Tundra.
Check Stock

SeaChoice 19301 Submersible 2000 GPH Bilge Pump

  • 【Specification】：Outlet Diameter : 29mm/ 0.95 Inch (1-1/8") POWER：1100 GPH Current(A）：3.2A Volt：12V.
  • 【Automatic mode connection】：Connect black wire to negative,Connect brown wire to positive,the pump will be shut off automatically when the water is pumped out.This auto bilge pump 1100 gph would improve work efficiency and could be used for a long term..
  • 【Advantages】:Equipped with built in electronic controlled sensor system for easy fully automatic operation.It is a small automatic boat bilge pump and it is rustproof and corrosion resistant..
  • 【Warning】:This auto boat bilge pump is designed for use with fresh water and salt water only. And polarity is important. If it is not correct, the pump rotate backwards..
  • 【Applications】:Ideal For Fishing Boats, Cruisers, Runabouts, Yachts, skiff, etc..
Check Stock

Aquastrong 1/38HP 85 GPH HAVC Condensate Pump, 115V/230V, Automatic Safety Switch, AC Condensate Removal for Air Conditioner, Furnace, Dehumidifier, 3.3' Power Cord

  • High Performance: Automatic condensate pump features an efficient thermally protected motor, providing quick draining and quiet operation. It can move water up to 85 GPH or lift water up to 20ft vertically. Reliable hall switch ensures auto operation and long service life. Ideal for removing condensate from AC units, furnaces and dehumidifiers.
  • Hi-level Safety Switch: Two signal lead wires can be wired directly to HAVC appliances for safety switch - when the sensor detects high water levels in the reservoir, the safety switch will be triggered and shut off the appliance automatically to prevent possible tank overflow. Please make sure to install the pump vertically on a flat surface or wall.
  • Compact & Durable: Vertical centrifugal pump design with removable 1/2 gallon reservoir, easy to operate and maintain. Solid plastic construction ensures abrasion and corrosion resistance. Five 1'' inlet ports allow for connection to multiple equipments. 2/5'' O.D. barbed outlet with built-in check valve fits 1/4'' to 3/8'' tubing. Easy to install.
  • Auto & Safe: Condensate tank pump will auto start when the water level reaches 2.28'' and auto stop by 1.26''. 3.3ft UL power cord with 3-prong plug ensures safety and convenience. It is necessary to clean the pump reserv....
Check Stock