Reviews Auto Part Fuel Injector

Fuel Injector Cleaner Machine & Tester, Ultrasonic Fuel Injector Cleaner & Injection for 4-Cylinder Vehicles, Leakage and Block Test for Gasoline Car & Motorcycle Injector Throttle Valve Spark Plug

  • ✪WHAT IS F100 FUEL INJECTION SYSTEMS CLEANERS - Autory F100 Fuel Injector Cleaner Machine is a professional 4 cylinders auto fuel injector testing cleaning machine. F100 Fuel Injector Cleaner Tester will help clean and test the fuel injectors of most of the gasoline cars and motorcycles.
  • ✪ULTRASONIC CLEANING - Autory F100 Fuel Injector Cleaner Kit works by sending an ultrasonic vibration signal to the injector nozzle through the pulse signal line, which makes the stubborn carbon deposit jitter strongly and removes more thoroughly.
  • ✪4 INJECTORS AT ONE TIME - Autory F100 Fuel Injector Cleaner Tool performs ultrasonic cleaning on single or multiple injectors simultaneously, 4 injectors can be tested and cleaned at one time. Plus, it can also be used on 6 cylinders, twice tests will do.
  • ✪REVERSE CLEANING & ON-VEHICLE CLEANING - F100 Injector Cleaner Machine supports reverse cleaning & on-vehicle cleaning, which can eliminate thoroughly blockages on the injector accessories and internal.
  • ✪ WIDE APPLICATION - Autory F100 Fuel System Tools comes standard with two sets of....
Check Stock

Engine Fuel Injector Removal Tool Puller for Land Rover Range Jaguar 5.0L V8

  • Injector Removal Tool Puller for Land Rover 5.0 3.0.
  • Easy Remove Fuel Injector: Usually, Injectors on vehicles are very tough to pull in general , but this tool could easy remove fuel injector, Improve efficiency, save a lot of time, it's possible to remove injectors from a Range Rover without it, is a must tool for remove fuel injector.
  • Application: This fuel injector remover tool compatible with Land Rover/Jaguar 3.0 5.0 petrol engine, fit for Jaguar X150, XK Series, X250(XF) and XJ models (V8 5.0lt petrol engines). fit for Land Rover Discovery 4, new Range Rover, Range Rover Sport (V8 5.0lt petrol engines), replace OEM 310-197.
  • Exceed OEM Design: Our fuel injector remove tool improved on the basis of OEM, our design more easy to use, give auto repair engineers a better experience.
  • Quality Guarante: This fuel injector remover tool made of high qualuty steel, high hardness and strong endurance to ensure that it is still intact after high-strength impact, and we offer lifetime warranty..
  • Tips: Before use, please tighten the nut at the end of the slider to prevent it from slipping off during use.Hold slight downward pressure on the locking clasp as u use the slide hammer to pop the injector free,that will get better results.
Check Stock

High Mileage Fuel Injector Cleaner and Carburetor Cleaner Treatment, Bottled Lubricant for Upper Cylinder, 5.25 Oz, 2 Count, STP

  • Two 5.25 fl oz bottles of STP High Mileage Fuel Injector & Carburetor Cleaner Treatment.
  • Fuel treatment additives help remove deposit buildups to save gas.
  • Friction modifier in the fuel additive combats upper cylinder friction.
  • STP fuel injector cleaner can help prevent hard stops, lost acceleration and rough idling for improved performance.
  • Jet fuel serves as the carrier for the active ingredients, creating a high-quality additive for easy auto care.
  • Add this fuel injector treatment to your vehicle regularly when you fill your gas tank.
Check Stock

Ultrasonic Fuel Injector Cleaner Machine & Fuel Tester 4 Cylinders 110V, CATUDIY Fuel Injector Cleaner Tool for Diesel Fuel System Cleaner Diagnostic Tester for Motorcycle Automotive Gasoline Test Kit

  • 【Ultrasonic Cleaner & Simulating Testing】The injector cleaner machine is a mechatronics automotive tool that combines ultrasonic cleaning technology and microcomputer oil pressure closed-loop control cleaning & detection technology. To simulate various realistic operating conditions of the engine, This fuel tester cleans and detects the fuel injectors of various automobiles and motorcycles.
  • 【Heated & Reusable & Effective】The fuel injector tester improves a lot of cleaning effect by heating reusable and recyclable cleaning fluid, which is money saving and eco-friendly. With 1.3L large capacity ultra cleaning tank, to perform ultrasonic cleaning on single / multiple injectors simultaneously, the auto cleaner can eliminate thoroughly blockages on the injector accessories and internal parts.
  • 【Portable & Humanized Design】The mini ultrasonic cleaner only weighs 8kg, easy to carry. Equipped with LED display, pressure gauge, glass tubes, testing liquid level gauge and multifunctional control panel, the injector pulse tester allows easy operation through its clear menu, and real-time monitoring of fuel injector detection and fuel dynamic value....
Check Stock

6.0 POWERSTROKE KC STAGE 2 TURBO (04-07)

  • ◭ [Vehicle Application] : Injector Pressure Regulator Valve with Socket 6.0L Powerstroke Diesel Engines Fits for Ford 6.0L V8 Diesel Turbocharged Vehicles - for 2004-2010 Ford E-350 E-450, for 2003-2010 Ford Excursion, for 2003-2010 Ford F-250 F-350 F-450 F-550 Super Duty..
  • ◭ [Manufacturer Part Number] : Direct replace factory part AP63417 1846057C1 5C3Z9C968CA 5C34-9C968-CA W3250216 CM5126 and HTV102 for a proper fit, Include IPR Valve Seal Kit OE Number 3C3Z9H529A, AP0035.
  • ◭ [Function] : Precisely manufactured internal valves high quality diaphragms and springs to perform excellently under all engine operating conditions. Replaces Injector Pressure Regulator Valve and regulates the oil bypass circuit of the high pressure oil pump, that opens and closes to allow high pressure oil into the injectors.This enables the PCM to control fuel delivery by increasing the speed in which the IPR valve operates thus properly control the pressure in the high-pressure oil system..
  • ◭ [Material and Installation] : IPR Injector Pressure Regulator Valve, contructed of premium material for long lasting durability and reliability. Robu....
Check Stock

JDMON Compatible with FICM Fuel Injector Engine Complete Wire Harness Ford F250 F350 F450 F550 Excursion Powerstroke 6.0L Diesel 2004-2007 Replaces Part 5C3Z9D930A 5C3Z-9D930-A

  • [HIGH-DUALITY MATERIALS] OEM-compliant fuel injector harness are constructed with high-quality materials that will not become brittle when exposed to extreme engine temperature.If your truck has a jetting fault code, idling or not traveling smoothly, please check and replace the harness in time to allow 6.0 Powerstroke to run normally..
  • [REPLACES PART] The fuel injector control module harnesses are a direct OEM replacement, replace Ford part number 5C3Z9D930A and 5C3Z-9D930-A ,making installation quick and easy..
  • [ENSURE THE RIGHT SINGNAL] The fuel injector harness' electric terminals are constructed with an aluminum material that is resistant to oxidation ensuring proper signal is maintained to the injector..
  • [WELL CONNECTED] The fuel injector harnesses use a high-temp Viton o-rings which enable prolonged sealing of electrical connection under extreme heat conditions..
  • [FITMRNT] Compatible with 2003, 2004, 2005, 2006, 2007 Ford F250, F350, F450, F550 and Excursion with the 6.0 Powerstroke Diesel engine. Including model years 03, 04, 05, 06, 07..
Check Stock

Set of 6 Performance 4-Hole Upgrade Fuel Injectors For 99-04 4.0L Jeep Cherokee 0280155784

  • Manufacturer Part Number: 0280155784 / Interchange Part Number: 280155784 , 4854181 , 4667938 , RL669938AB , FJ570 , FJ454 / Other Part Number: 1999 2000 2001 XJ TJ WJ EV6 4 Nozzle Wrangler.
  • Car Fitement: for ALL 1999 to 2004 Jeep Cherokee Grand Cherokee and Wrangler with 4.0 L, Six Cylinder Motor.
  • High performance fuel injector, meets or exceeds OEM standards, 100% tested before shipping.
  • Please check your correct replacement parts before purchase, the picture show more detail.
  • Package including: 1 x set of fuel injector.
Check Stock

TopDiag P200 Automotive Circuit Tester, Power Circuit Probe Kit, 9~30V with Multimeter/Relay/Fuel Injector Tester/Activating Component/0~5V Power with 20ft Cable for 12V 24V Vehicle

  • 【Powerful Circuit Tester Kit】The P200 Automotive Circuit Tester is the only circuit tester on the market that can be upgraded, a tool for quickly testing all ✅9V-30V✅ electronic systems. It can diagnose problems in the components, electrical circuit systems or fuel injectors of the car in the shortest time. Not only the test time is greatly shortened, but also more intelligent and intuitive, suitable for any novice driver or maintenance engineer..
  • 【Fuel Injector & Relay Tester】It is extremely important to regularly test the fuel injector. Damage to the fuel injector can easily lead to unstable idle speed of the engine, increased fuel consumption, causing engine shock. It is worth mentioning that TopDiag P200 auto circuit tester has been added 300+ USD valued powerful functions, namely: ✅Fuel Injector Test✅ Relay test mode. TopDiag makes diagnosing your car easier and saves maintenance costs..
  • 【0~5V Adjustable Power Supply & Activating Components】0~5V power is useful when checking the wiring to the ECU/ECM, also meet the voltage requirements for the sensitive parts with low voltage. Besides positive activation, negative activation is our n....
Check Stock

JDMON Compatible with Fuel Injectors Chevy Silverado 1500 2500 3500 Tahoe compatible with GMC Sierra 1500 2500 3500 Tahoe 4.8L 5.3L 6.0L 2001-2006 Replace 17113553 FJ315 17113698 8pcs

  • Compatible with Chevy Express 2500,Express 3500,Silverado 1500,Silverado 1500 HD,Silverado 2500,Silverado 2500 HD,Silverado 3500，Tahoe.GMC: Savana....
  • PART NUMBER: 1711355 17113698 FJ315.Note:Please ensure this product will fit your vehicle by checking the photos or the part number with your old item....
  • Recommendations for regular cleaning of fuel injectors: Generally speaking, if the car is in good condition and the fuel quality is good, it can be....
  • ENRGY SAVING：Injector Nozzles designed for optimum fuel atomization (mist) for increased performance and fuel economy..
  • OE STANDARD：Fuel Injector Spray Angle & Pattern and Fuel Volume per millisecond meet or exceed OEM specifications..
Check Stock

8 Cylinder Fuel Spider Injector With Bracket,Fuel Injector Kit Compatible with Chevy Pickup Truck 5.0L 5.7L V8 Replacement#FJ10566 FJ504 89060440 93441235 2173029

  • ...burned hydrocarbon emissions.Internal seal rings protected from fuel exposure, minimizing in-use "sticking" for longer-lasting durability.Improved sealing materials, providing cold sealing to -40 degrees C for better cold starts..
  • 【Time to Replace】 The spider injector is located under the car's intake manifold.The injector will not pump clean fuel if the filters are clogged with carbon or other impurities. You should replace the clogged spider injector as soon as possible to reduce pollution and increase the performance of your car..
  • 【Notice】Contact us without hesitation, if you have any questions concerning accessories when you receive it.We does our utmost to provide the best possible solutions for your needs. Enjoy your worry-free shopping experience..
Check Stock

kipa Diesel Fuel Injector Cup Sleeve Installation Removal Tool for 6.6L LB7 Chevy Duramax Engines 2001-2004.5

  • Top Quality Well-Manufactured Diesel Fuel Injector Cup Sleeve installation Removal Tool is an engine tool kit made from sturdy, tough prime fibrous Alloy materials that Trucks & Cars enhanced durability and superior reliability. Durable.
  • A must have for any shop working on LB7 Duramax Engines, This Fuel Injector Sleeve Tool helps with the removal and installation of the injector cups without damaging the cup in the process..
  • Fitment: Replace for 2001-2004.5 6.6L LB7 Chevy Engines. All hardware has been coated for rust resistance as well as a rockwell hardness of over 62 to ensure a long life.
  • Replace for OE Part Number J-45910, 7222, ST-193, 2386. KIPA Tool utilize the latest in metallurgical and coating technology it allows us to thread our removal tool into the damaged injector cup without creating any filings or chips to fall into your cylinders. The tool use bridges that are quickly fastened to the injector mounting holes..
  • Our design is engineered towards repeated shop use, and efficiently removing and installing the injector cups . Removing and installing the injector cups should be a surgical operation, not something requiring beating cups in with hammers and leaving brass filings from removing.KIPA designed our tools with tight clearances, a....
Check Stock

Diesel Fuel Filter for VW Golf Jetta TDI HENGST Made in Germany

  • Applicable Engine: Injector removal tool kit compatible with Volkswagen 1.2, 1.4, 1.6, 1.8, 2.0, 2.7 V6, 3.0 V6, 3.2 V6, 3.6 V6, & 4.2 V8 FSI TSI TFSI engine, compatible with Audi VW TDi 4 cyl 8V 16V Engine.
  • Compatible with Diesel and Petrol Engine: Specially designed for removing and installing of high pressure injector and combustion chamber seal, this professional replace fuel injector tool kit compatible with Volkswagen petrol and diesel engine, compatible with Audi, compatible with Seat, compatible with Skoda.
  • Easy Removal Install Fuel Injector: This tool have multiple different size and shap injector puller, they can compatible with Volkswagen different engine, it's easy pull out injector with slide hammer.
  • Replace Injector Seals: This kit include injector oil seal install tool, help you to reseal and reinstall fuel injectors.
  • Combinate Kit: This kit include different diesel petrol injector puller, slide hammer, injector oil seal reinstall tool, injector brush, this case have all the tools for replace fuel injector.
Check Stock

Fuel Injector Return Line Kit - Fittings + Hose for VW Audi TDI 2.0L Diesel

  • Applicable Engine: Injector removal tool kit compatible with Volkswagen 1.2, 1.4, 1.6, 1.8, 2.0, 2.7 V6, 3.0 V6, 3.2 V6, 3.6 V6, & 4.2 V8 FSI TSI TFSI engine, compatible with Audi VW TDi 4 cyl 8V 16V Engine.
  • Compatible with Diesel and Petrol Engine: Specially designed for removing and installing of high pressure injector and combustion chamber seal, this professional replace fuel injector tool kit compatible with Volkswagen petrol and diesel engine, compatible with Audi, compatible with Seat, compatible with Skoda.
  • Easy Removal Install Fuel Injector: This tool have multiple different size and shap injector puller, they can compatible with Volkswagen different engine, it's easy pull out injector with slide hammer.
  • Replace Injector Seals: This kit include injector oil seal install tool, help you to reseal and reinstall fuel injectors.
  • Combinate Kit: This kit include different diesel petrol injector puller, slide hammer, injector oil seal reinstall tool, injector brush, this case have all the tools for replace fuel injector.
Check Stock