Reviews Auto Gas Spring Lift

2 Truck Upfitters 16' Gas Props (15.7' ext, 9.4' Compressed, 55 lbs of Pressure ea) Compatible with are, ATC, Snugtop, Leer Campers. Measurement REQ'D! Incl 4 Ball mounts+Angled & Straight Fittings!

  • ...l camper shell brands / models. Measure your strut from center of socket to center of socket when fully opened & fully closed to get accurate measurement. Please see pictures to determine how to measure. Do NOT measure from end to end. Measurement must be from the center of plastic ball mount on each end of the gas spring lift. Measurement is important to ensure they open properly and get a good camper shell seal against the camper shell gasket when closed..
  • Comes with four 10mm ball mounts for alternate 'other than truck camper shell' applications, such as in camper / canopy windoors, RV doors and awnings, boat hatch spring lifts, gas struts for cabinets, storage bed lifts, toolbox struts, etc. These gas shock lift supports CANNOT be compressed by hand. These gas props MUST be installed in the EXTENDED / OPEN position. It is nearly impossible to install them in the CLOSED position. Please refer to the install video for guidance on how to install..
  • Compatible with Suspa # c16-23994 & compatible with Stabilus # 025657 These camper shell shocks are compatible with many truck canopy types, including LEER truck cap parts, ARE truck topper parts, Century parts, Snugtop replacement parts Astro tops, ATC campers, and many other fiberglass brands that utilize ....
Check Stock

C16-20651 C16-33313 18.7 inch 40 lbs Gas Strut Shocks Lift for A.R.E Leer Camper Shell Pickup Truck Cap Topper Canopy Glass Door Hatch Back Window Bed Cover, 18.7" Gas Spring by PAMAGOO 2 Pack

  • ⌈18.7 inch Gas Strut⌋Extended length: 18.70 Inch, Compressed length: 10.82 Inch. 40 Lb / 178 N per strut, 2 PACK. Package information: 18.70 inch 40 lbs gas prop strut X 2.
  • ⌈18.7 inch Gas Shock⌋Lift-o-mat spring strut lift for A.R.E Leer camper shell, pickup truck cap topper, canopy glass door hatch, back window, bed cover, replacement shocks, etc..
  • ⌈18.7 inch Gas Spring⌋Interchange Part number: C1620651, C16-20651, C16-33313, C1633313, SE187P40, SE187P40S10..
  • ⌈Leer Camper Shell Gas Shock⌋If the weight and the pressure of the gas strut do not match, the gas strut may not work properly, please select the appropriate gas strut according to the original part number and pressure value. NOTE: The gas struts can not be compressed by hands before installation!!!.
  • ⌈Canopy Truck Gas Strut⌋180,000 times -passed TUV fatigue test. Pamagoo choose special low-temperature-resistant materials, WORKING TEMPERATURE: -40℃~60 ℃/-40℉~140℉. PAMAGOO will provide you with professional customer service BOTH before and after your purchase and offer 18-MONTHS support service. We have gas spring installation videos and online service to guide quick installation in minutes. After successful installation, the Door/Window can be lifted easily..
Check Stock

Gas Struts,Gas Springs,Lift Support,Gas Shocks,Lid Stay,Lid Support,Gas Strut Lid Stay Support Kitchen Cabinet Door Hinge,Soft Close Lid Hinge,Gas Shocks,Toy Box Hinges,150N/33lb/15KG[2 Pack]

  • ...t is recommended: one for cabinet door width 600mm/23.6in to achieve parallel opening and closing synchronization. , Choose the model and quantity according to the weight of the actual cabinet door panel. The choice is not soft and hard, and the small one cannot hold the cabinet door..
  • ★Suitable for Gas Strut, Gas Spring, Lid Support, Gas Shocks, Lift Support, Lid Stay, Heavy Duty Kitchen Cabinet Doors, RV Overhead Cabinet Doors, Display Table, Cabinets, Toy Box or Storage Box etc..
  • ★ Pressure:150N / 33lb / 15KG (Per Strut).
  • Length ( hole center to hole center) :9-11/16”.
  • Travel:3-14/25” ,Distance between ball mounts compressed: 6-1/8″. Please select the correct model strictly according to the data sheet of the detailed picture. The installation must be installed in strict accordance with the size of the installation picture, and the wrong installation size will bend the mountain-shaped hinge fittings on the cabinet door..
  • ★ 1.The gas spring piston rod must be installed in the downward position, not upside-down, which can reduce friction an....
Check Stock

11Inch Gas Spring Prop Strut Shock Lift Support for RV Door Motorhome Door Compartment Door Cargo Door and other DIY Applications 500N

  • 【Premium Quality Making Material】 -This rv compartment door hydraulic hydraulic gas spring is made of precision steel pipe, which is flexible and....
  • 【Long Serving Life and Sturdy】 -This gas strut hood lift is strong and not easy to break, good performance in durability,a good replacement for....
  • 【Convenient To Install】 -Open the lid or door to the position you want.Take about 20% of the lid length as the upper installation point.
  • 【Detailed Specification】 -This gas spring Type: Gas Spring Center Distance: Approx. 280mm / 11in Stroke: Approx. 100mm / 3.9in Pressure: 100N,....
  • 【Wide Of Applicated】 -This gas spring is suitable for equipment flip lid, snack car flip door, advertising bar, light box, flip window and hood....
Check Stock

C16-10788 12 inch 35lb Gas Strut Spring Shocks C1610788 for Truck Toolbox A.R.E. Camper Shell Leer Window 12' 35 Pound Lift Support Struts

  • ✅ C16 10788 12 inch Gas Strut - This 12 inch gas struts 12 inch 35lb Gas Struts are usually used for camper shell topper window pickup toolbox Lid, leer capper, pickup topper, boat engine cover, steel equipment box, boat storage lid, truck canopy, etc..
  • ✅ 12 inch 35 Pound Gas Shocks - Most Suitable Support weight is between 28 to 38 pounds, if out of this range, pls select other ARANA struts with different pressure.
  • Or if you are not sure if this product is suitable, our customer service team will give you professional guide, just click "Ask Seller".
  • ✅ C16-10788 12 inch Gas Spring - Force 35lb Per Shock, Extended Length A [in]: 12.2, Compressed Length B [in]: 8.66, intercharge part no.: C1610788, c16-10788, c16 10788.
  • ✅ Camper Shell Window Lift Struts - 18 Months Replacement Service Plus Lifetime Technical Support, once any quality problems or installation/using problems, Click ASK SELLER besides your order from us and let us solve your problem!.
  • ✅ Truck Tool Box Lid Lift Supports - C1610788 gas shocks could be used as the replacement lift struts for truck Pickup Tool Box, Weatherguard aluminum toolbox, Camper shell topper window and other self-built application.
  • Note: Lift Supports couldn't be COMPRESSED by hands before installing!.
Check Stock

Lift Supports,ECCPP Rear Window Glass Lift Supports Struts Shocks for 2002-2007 for Jeep Liberty Set of 2

  • FITMENT - Lift supports struts rods shocks props gas spring for Jeep Liberty 2002 2003 2004 2005 2006 2007 compatible with 4365 SG314048 lift support....
  • QUALITY - Rust-resistant Nitride corrosion resistant piston rod extends product life, Multi-Lobe Seal make gas springs more tolerant to vibration and....
  • FUNCTION - Use compressed gas, contained in a cylinder and compressed by a piston, to exert a force to support the weight of front hood or rear....
  • EASY INSTALLATION - Easy to install with simple hand tools in just minutes - no special tools required for installation.
  • NOTICE - Please check the description and compatibility chart before your purchasing. We provide ONE YEAR WARRANTY for all our lift supports. Please....
Check Stock

ECCPP Front Hood Lift Supports Struts Gas Springs for Jeep Liberty 2002 2003 2004 2005 2006 2007 4366 Strut Set of 2

  • FITMENT - Lift supports struts rods shocks props gas spring for Jeep Liberty 2002 2003 2004 2005 2006 2007 compatible with 4366 SG314037 lift support....
  • QUALITY - Rust-resistant Nitride corrosion resistant piston rod extends product life, Multi-Lobe Seal make gas springs more tolerant to vibration and....
  • FUNCTION - Use compressed gas, contained in a cylinder and compressed by a piston, to exert a force to support the weight of front hood or rear....
  • EASY INSTALLATION - Easy to install with simple hand tools in just minutes - no special tools required for installation.
  • NOTICE - Please check the description and compatibility chart before your purchasing. We provide ONE YEAR WARRANTY for all our lift supports. Please....
Check Stock

ECCPP 2pcs Liftgate and 2pcs Window Glass Lift Supports Struts for Jeep Grand Cherokee 2005-2008

  • FITMENT - Lift supports struts rods gas spring for Jeep Grand Cherokee 2005 2006 2007 2008 compatible with 6601 6104 lift support strut.
  • QUALITY - Rust-resistant Nitride corrosion resistant piston rod extends product life, Multi-Lobe Seal make gas springs more tolerant to vibration and extreme temperature, 100% brand new and tested to meet or exceed OEM specifications.
  • FUNCTION - Use compressed gas, contained in a cylinder and compressed by a piston, to exert a force to support the weight of front hood or rear liftgate tailgate trunk hatchback doors while they are open, no need to hold the door up with your head.
  • EASY INSTALLATION - Easy to install with simple hand tools in just minutes - no special tools required for installation.
  • NOTICE - Please check the description and compatibility chart before your purchasing. We provide ONE YEAR WARRANTY for all our lift supports. Please contact us if you have any question.
Check Stock

AHP Alpha-TIG 225Xi 200 Amp IGBT AC/DC Pulse TIG/Stick Welder 110v/220v Dual Voltage

  • Synergic Function: this mig welder designed basic at One-Knob Intelligent control system. Mig machine can automatic compensation and adjustment of....
  • 110/220V Dual Voltage: This mig welder is dual voltage 110/220V, Machine will auto indicate the input AC voltage, Max output current is 165A, Duty....
  • Lift Tig, 2T/4T Gas/Gasless Function: Machine with Lift TIG function, It is IGBT inverter Gas/Gasless mig welder, Use 0.030’’(0.8mm) Solid and....
  • Arc force, Hot Arc, VRD: This mig machine will auto control voltage and current to achieve smooth arc, This mig welder quite easy using for the Newer....
  • Mig Welder, What’s come with machine: 1 x Mig machine, 1 x 3meters Mig torch, 1 x Ground clamp with 3meters cable, 1 x Stick holder with 3meters....
Check Stock

ECCPP Lift Supports Rear Hatch Struts Gas Springs Shocks for Acura RSX 2002-2006 Compatible with 6145 Strut Set of 2

  • FITMENT - Lift supports struts rods gas spring for Acura RSX 2002 2003 2004 2005 2006 compatible with 6145 lift support strut.
  • QUALITY - Rust-resistant Nitride corrosion resistant piston rod extends product life, Multi-Lobe Seal make gas springs more tolerant to vibration and extreme temperature, 100% brand new and tested to meet or exceed OEM specifications.
  • FUNCTION - Use compressed gas, contained in a cylinder and compressed by a piston, to exert a force to support the weight of front hood or rear liftgate tailgate trunk hatchback doors while they are open, no need to hold the door up with your head.
  • EASY INSTALLATION - Easy to install with simple hand tools in just minutes - no special tools required for installation.
  • NOTICE - Please check the description and compatibility chart before your purchasing. We provide ONE YEAR WARRANTY for all our lift supports. Please contact us if you have any question.
Check Stock

SCITOO 6pcs Hood and Liftgate and Window Lift Supports Struts Gas Springs Shocks fit for Jeep Grand Cherokee 2005-2008

  • COMPATIABLE VEHICLES - lift support strut rod gas spring shocks for Jeep Grand Cherokee 2005 2006 2007 2008.
  • HIGH QUALITY - Premium quality gas lift support - Brand New High Quality OEM Replacement.
  • FEATURES - Multi-lobe sealed lift bracket is more effective against vibrations and extreme temperatures, sun protection piston rod extends product....
  • EASY INSTALLATION - OEM quality design ensures easy installation and precise operation, no special tools required for installation.
  • GUARANTEE - 100% brand new and tested to meet or exceed OEM specifications. One Year Warranty available for our this item. Accept return and refund to....
Check Stock

10L0L Golf Cart Front End Lift Block Kit for Club Car DS Gas & Electric

  • Lift block is 1" tall, machined from a single piece of billet aluminum, high strength and durability.
  • Fits Club Car DS gas & electric golf cart only.
  • No cutting or drilling required, comes with all necessary hardware, install between front spring and front spring mounting plate.
  • This kit is designed to slightly lift the front end of your cart so that you can fit most 12 or 14 inch golf cart wheels with lo-profile tires..
  • It is not made to be used in conjunction with an already installed lift kit.
Check Stock

Marilyn Hotchkiss' Ballroom Dancing & Charm School

  • ✅ ARANA 20 inch Gas Struts C1608054 Lift Supports -- 2Pcs Set Force 100 Pounds 445N Gas Shocks , most SUITABLE support weight for 2 STRUTS is 85 lbs - 110 lbs, this means if your project lid is between 85 pounds and 110 pounds, this 100LB gas strut set is SUITABLE!.
  • ✅ ARANA 20 Inch 100 Lbs Gas Spring Shocks -- Extended Length A [in]: 19.7(500mm), Compressed Length B [in]: 11.8(300mm), Interchange number: 6939, 6939S10, C1608054, C16-08054.
  • measurement of the supported lid weight or of your old strut pressure is required to prevent purchasing wrongly!.
  • ✅ C16-08054 Gas Props 20inch -- Direct replacement struts for RV bed, motorhome bed, tanning bed, camper bed, travel trailer bed mattress, queen bed, etc..
  • Note: DO NOT compress them by hands before installing, the struts could only be compressed after installing successfully!!!.
  • ✅ ARANA C1608054 100 lb Lift Supports -- Customer will also use them on tonneau cover, heavy camper shell roof, tv cabinet door, trailer window, compartment door, floor hatch, truck cover, bar shed window, heavy custom build lid, etc.
  • Very Strong, do not buy them for the lid weight less than 80 pounds.
  • ✅100% Satisfaction Service -- 18 Months Support comes with every ARANA product.
Check Stock