Reviews Auto Exhaust Joints

Walker Exhaust 35958 Muffler/Exhaust Putty

  • Effective for sealing exhaust joints subject to elevated temperatures.
  • Ideal for “out-of-round” muffler and pipe connections.
  • New Walker accessories help to ensure effective exhaust repairs.
  • Walker supplies all of the accessories you need to do the complete exhaust job.
Check Stock

J-B Weld MufflerSeal Muffler Cement Plastic Tube 12 oz., Model Number: 37912

  • J-B Weld Muffler Seal: MufflerSeal is an iron reinforced paste designed to seal mufflers, pipe joints and exhaust systems. MufflerSeal can resists up to 700 F..
  • Cure Process: MufflerSeal can cure in two ways: By allowing the product to fully harden after it has been applied which can take up to 24 hours (time may vary based on cold or humid work environments) or MufflerSeal can be cured through heat application. You will be able to tell when the product is cured once it is hard..
  • Projects: Mufflers, Pipe Joints and Exhaust Systems..
Check Stock

SYKRSS 2.0' Stainless Steel Butt Joint Exhaust Seal Band Clamp

  • Universal butt joint exhaust clamp fit for 2.0" OD pipe to 2.0" OD pipe, mufflers ect. quickly connect the exhaust pipe, It is removable and reusable.
  • It provides a full 360 °equal distribution of stretching forces to prevent leaks and control material distortion while complesing a seal round the joined exhaust components.
  • Full clamping area to create the best seal available without distorting pipe, muffler inlets, outlets, elbow joints, flex tubing and other system connections.
  • The butt joint exhaust clamp is made in stainless steel material, not easy to rust, corrosion resistance.
  • SYKRSS is the responsible brand, strive to offer a high-quality product and service. if you encounter any problems during the installation process, feel free to contact us via Amazon Mail. We provide 24-hour mail service and will help you as soon as possible.
Check Stock

3 Inches OD DIY Custom Exhaust Pipe Kit 16-Piecese Straight & 45/90 Degree & U-Bends

  • ▶️ These exhaust bend kits include enough tubing to allow you to run your own exhaust system the way you want it. Each pipe is expanded on one end....
  • ▶️ Made of High Quality Mild Steel with Computerized Mandrel-Bends for Strength and Durability.
  • ▶️ i.e. Maximizing Smoothest High Exhaust Air Flow Rate.
  • ▶️ Slip Fit Joints to Provide Easiest Fabrication.
  • ▶️ 16-Gauge Piping Walls, Inlet / Outlet Size (IN) : 3" OD.
Check Stock

SYKRSS 2.25'Stainless Steel Butt Joint Exhaust Seal Band Clamp

  • Universal butt joint exhaust clamp fit for 2.25" OD pipe to 2.25" OD pipe, mufflers ect. quickly connect the exhaust pipe, It is removable and reusable.
  • It provides a full 360 °equal distribution of stretching forces to prevent leaks and control material distortion while complesing a seal round the joined exhaust components.
  • Full clamping area to create the best seal available without distorting pipe, muffler inlets, outlets, elbow joints, flex tubing and other system connections.
  • The butt joint exhaust clamp is made in stainless steel material, not easy to rust, corrosion resistance.
  • SYKRSS is the responsible brand, strive to offer a high-quality product and service. if you encounter any problems during the installation process, feel free to contact us via Amazon Mail. We provide 24-hour mail service and will help you as soon as possible.
Check Stock

Portable AC Window Kit Soleus Air Parts Air Conditioner Hose Exhaust Coupler-Supports Both Clockwise and Counter Clockwise AC Hose Threads-Thread Direction Converter and Extension 5inch

  • 1. The clockwise and counterclockwise threaded joint is connected to the threaded hose. The exhaust hose coupler provides the best solution for....
  • 2. Our air conditioner exhaust hose connector is the best solution to extend the air conditioner hose. Allows you to easily connect the exhaust....
  • 3. The exhaust hose pipe extender is made of high-quality ABS and PLA plastics. Due to its sturdy and flexible structure, the portable AC exhaust hose....
  • 4. Our portable air conditioner hose extender provides a tight and stable installation for the AC device pipe to avoid any leakage..
  • 5. We provide 2 different sizes of threaded portable air conditioner exhaust hose joints are 5inch and 5.9inch to choose from, you can choose....
Check Stock

Permatex 80335 Muffler and Tailpipe Sealer, 3 oz.

  • Seals holes and leaks in mufflers, tailpipes and around joints.
  • Temperature Range: up to 2000°F (1000°C).
  • Suggested Applications: Mufflers, tailpipes, joints, and catalytic converters.
  • exhaust system must be cool before applying.
Check Stock

V-Twin 30-0576 - Six Gun Exhaust Pipe End Set

  • Installation method: remove the old one and install the new one..
  • Note: We are a professional manufacturer of auto parts, if you have any questions, you can contact us at any time, we will answer you within 24 hours..
  • Bright decoration:The surface is polished, and the decorates your exhaust pipe, used to reduce the damage of automobile exhaust pipe due to long-term sewage and exhaust gas, and extend the life of exhaust pipe..
  • Durable:protect your original pipe from the sun and rain,avoid and deformation.Increase exhaust pressure and reduce exhaust noise effectively..
  • Replacement: Easy to use, no damage to the car, not easy to fall off, firmly installed on the car..
Check Stock

3'' Custom Exhaust Kit Universal Mild Steel 16PCS Tubing Mandrel Bend Pipe Straight & U-Bend (2 PACKAGES SHIPPING))

  • Specification: 16-Gauge Piping Walls, Inlet / Outlet Size (IN) : 3″ OD.
  • Easy To Use: Slip Fit Joints to Provide Easiest Fabrication.
  • Universal Kit: 4 pcs 48″ Straight Pipes, 4 pcs 90 Degree Pipes, 4 pcs 45 Degree Pipes, 4 pcs 180 Degree U-Bends.
  • Sturdy Structure: Made of High Quality Mild Steel with Computerized Mandrel-Bends for Strength and Durability, i.e. Maximizing Smoothest High Exhaust Air Flow Rate.
  • DIY Custom: These Exhaust Bend Kits Include Enough Tubing To Allow You To Run Your Own Exhaust System The Way You Want It.
Check Stock

LEIMO Exhaust Hanger Removal Pliers，Exhaust Hanger Removal Tool Separates Rubber Supports from Exhaust Hanger Brackets

  • Heavy duty auto tool for removal of exhaust components from rubber-style hangers,Separates Rubber Supports from Exhaust Hanger Brackets..
  • Cushioned slip-resistant handles，25 degree offset for easy access,The operator simply squeezes the pliers handles to force the rubber support from the exhaust hanger to make a difficult job much easier..
  • Exhaust Hanger Removal Pliers are designed to work on all import and domestic car and truck exhaust systems that use hanger supports and are great for work on tailpipes, mufflers, and more..
  • Package includes:1*Exhaust pipe removal pliers.
  • We strive to offer a high-quality product and service. If you're not completely satisfied, you can ask for a replacement or full refund..
Check Stock

DNA MOTORING ZTL-30RAW 16 Pcs 3 Inches Mild Steel DIY Custom Mandrel Exhaust Pipe Straight & U Bend Tube Kit,Universal Fit

  • Specification: 16-Gauge Piping Walls, Inlet / Outlet Size (IN) : 3″ OD.
  • Easy To Use: Slip Fit Joints to Provide Easiest Fabrication.
  • Universal Kit: 4 pcs 48″ Straight Pipes, 4 pcs 90 Degree Pipes, 4 pcs 45 Degree Pipes, 4 pcs 180 Degree U-Bends.
  • Sturdy Structure: Made of High Quality Mild Steel with Computerized Mandrel-Bends for Strength and Durability, i.e. Maximizing Smoothest High Exhaust Air Flow Rate.
  • DIY Custom: These Exhaust Bend Kits Include Enough Tubing To Allow You To Run Your Own Exhaust System The Way You Want It.
Check Stock

Szliyands Exhaust Hanger Removal Pliers - Separates Rubber Supports from Exhaust Hanger Brackets - 25 Degree Offset for Access in Hard to Reach Places

  • Szliyands Quality Exhaust Hanger Removal Pliers.
  • Heavy duty auto tool for removal of exhaust components from rubber-style hangers,Separates Rubber Supports from Exhaust Hanger Brackets..
  • Exhaust Hanger Removal Pliers are designed to work on all import and domestic car and truck exhaust systems that use hanger supports and are great for work on tailpipes, mufflers, and more..
  • Cushioned slip-resistant handles，25 degree offset for easy access,The operator simply squeezes the pliers handles to force the rubber support from the exhaust hanger to make a difficult job much easier..
  • Package includes:1*Exhaust pipe removal pliers.
  • We strive to offer a high-quality product and service. If you're not completely satisfied, you can ask for a replacement or full refund..
Check Stock

DNA Motoring ZTL-25SS 16 Pcs 2.5 Inches Stainless Steel DIY Custom Exhaust Tubing Mandrel Bend Pipe Straight & U-Bend Kit, Universal Fit

  • Easy To Use: Slip Fit Joints to Provide Easiest Fabrication.
  • Universal Kit: 4 pcs 48" Straight Pipes, 4 pcs 90 Degree Pipes, 4 pcs 45 Degree Pipes, 4 pcs 180 Degree U-Bends.
  • Sturdy Structure: Made of High Quality Stainless Steel with Computerized Mandrel-Bends for Strength and Durability.
  • i.e. Maximizing Smoothest High Exhaust Air Flow Rate.
  • DIY Custom: These Exhaust Bend Kits Include Enough Tubing To Allow You To Run Your Own Exhaust System The Way You Want It.
Check Stock