Reviews Auto Binary Signals

Analog Devices ADG509ATQ Analog Multiplexer

  • 【16-channel Analog Multiplexer】- This is a very convenient 16 channel CD74HC4067 analog/digital multiplexer/demultiplexer..
  • 【Used for】- It is suitable for digital and analog signals (voltage cannot be higher than VCC) and can be connected in either direction. To control this, please connect the four digital outputs to the address selection pin of the chip (SO-S3) and send it the binary address of the desired channel..
  • 【Process Digital Signals】- Because the multiplexer can also process digital signals, you can use it to transfer TTL-level serial data to multiple devices through pipe or transfer from multiple devices..
  • 【Bidirectional Internal Switch】- The internal switch is bidirectional, with a low on resistance and off leakage, and to prevent cross talk, please turn off the switch first and then on..
  • 【Note】- Drive it to a high level, and it will completely disconnect the common pins (all switches are disconnected). Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering..
Check Stock

74LS153 Dual 4-Input Multiplexer (2 Pack)

  • Wide Range of Digital and Analog Signal Levels Digital: 3 V to 20 V Analog: ≤ 20 VP-P, Break-Before-Make Switching Eliminates Channel Overlap.
  • Low ON Resistance, 125 Ω (Typical) Over 15 VP-P Signal Input Range for VDD – VEE = 18 V.
  • High OFF Resistance, Channel Leakage of ±100 pA (Typical) at VDD – VEE = 18 V, Maximum Input Current of 1 µA at 18 V Over Full Package Temperature Range, 100 nA at 18 V and 25°C.
  • Logic-Level Conversion for Digital Addressing Signals of 3 V to 20 V (VDD – VSS = 3 V to 20 V) to Switch Analog Signals to 20 VP-P (VDD – VEE = 20 V) Matched Switch Characteristics, rON = 5 Ω (Typical) for VDD – VEE = 15 V Very Low Quiescent Power Dissipation Under All Digital-Control Input and Supply Conditions, 0.2 µW (Typical) at VDD – VSS = VDD – VEE = 10 V.
  • Binary Address Decoding on Chip, 5 V, 10 V, and 15 V Parametric Ratings, 100% Tested for Quiescent Current at 20 V.
Check Stock

100PCS CD4053 CD4053B CD4053BE DIP-16 Analog Multiplexer IC

  • It is suitable for digital and analog signals (voltage cannot be higher than VCC) and can be connected in either direction. To control this, please connect the four digital outputs to the address selection pin of the chip (SO-S3) and send it the binary address of the desired channel..
  • The internal switch is bidirectional, with a low on resistance and off leakage, and to prevent talk, please turn off the switch first and then on..
  • Drive it to a high level, and it will completely disconnect the common pins (all switches are disconnected)..
  • This is a very convenient 16 channel CD74HC4067 analog/digital multiplexer/demultiplexer..
  • Because the multiplexer can also process digital signals, you can use it to transfer TTL-level serial data to multiple devices through pipe or transfer from multiple devices..
Check Stock

Analog Multiplexer Single 8:1 ñ9 Volt 20 Volt 16-Pin Plastic DIP Tube

  • The internal switch is bidirectional, with a low on resistance and off leakage, and to prevent talk, please turn off the switch first and then on..
  • It is suitable for digital and analog signals (voltage cannot be higher than VCC) and can be connected in either direction. To control this, please connect the four digital outputs to the address selection pin of the chip (SO-S3) and send it the binary address of the desired channel..
  • Drive it to a high level, and it will completely disconnect the common pins (all switches are disconnected)..
  • Because the multiplexer can also process digital signals, you can use it to transfer TTL-level serial data to multiple devices through pipe or transfer from multiple devices..
  • This is a very convenient 16 channel CD74HC4067 analog/digital multiplexer/demultiplexer..
Check Stock

OEM Nexperia 74HC4067PW,112, Analog Switch/Analog Multiplexer Single 16:1 24-Pin TSSOP Bulk (100 Items)

  • Because the multiplexer can also process digital signals, you can use it to transfer TTL-level serial data to multiple devices through pipe or transfer from multiple devices..
  • This is a very convenient 16 channel CD74HC4067 analog/digital multiplexer/demultiplexer..
  • The internal switch is bidirectional, with a low on resistance and off leakage, and to prevent talk, please turn off the switch first and then on..
  • It is suitable for digital and analog signals (voltage cannot be higher than VCC) and can be connected in either direction. To control this, please connect the four digital outputs to the address selection pin of the chip (SO-S3) and send it the binary address of the desired channel..
  • Drive it to a high level, and it will completely disconnect the common pins (all switches are disconnected)..
Check Stock

Analog Demultiplexer, CD74HC4067 High Speed Analog Multiplexer Two-Way Connection Analog Multiplexer High Speed for Digital and Analog Signals

  • Because the multiplexer can also process digital signals, you can use it to transfer TTL-level serial data to multiple devices through pipe or transfer from multiple devices..
  • This is a very convenient 16 channel CD74HC4067 analog/digital multiplexer/demultiplexer..
  • The internal switch is bidirectional, with a low on resistance and off leakage, and to prevent talk, please turn off the switch first and then on..
  • Drive it to a high level, and it will completely disconnect the common pins (all switches are disconnected)..
  • It is suitable for digital and analog signals (voltage cannot be higher than VCC) and can be connected in either direction. To control this, please connect the four digital outputs to the address selection pin of the chip (SO-S3) and send it the binary address of the desired channel..
Check Stock

10 PCS Analog Multiplexer,Breakout Board Module,CD74HC4067 High Speed CMOS 16-Channel Analog Digital Multiplexer Demultiplexer,Suitable for Digital and Analog Signals

  • Because the multiplexer can also process digital signals, you can use it to transfer TTL-level serial data to multiple devices through pipe or transfer from multiple devices..
  • It is suitable for digital and analog signals (voltage cannot be higher than VCC) and can be connected in either direction. To control this, please connect the four digital outputs to the address selection pin of the chip (SO-S3) and send it the binary address of the desired channel..
  • This is a very convenient 16 channel CD74HC4067 analog/digital multiplexer/demultiplexer..
  • The internal switch is bidirectional, with a low on resistance and off leakage, and to prevent talk, please turn off the switch first and then on..
  • Drive it to a high level, and it will completely disconnect the common pins (all switches are disconnected)..
Check Stock

Juried Engineering CD4052BE CD4052 CMOS 20-V, 4:1, 2-Channel Multiplexer IC Breadboard-Friendly DIP-16 (Pack of 5)

  • Wide Range of Digital and Analog Signal Levels Digital: 3 V to 20 V Analog: ≤ 20 VP-P, Break-Before-Make Switching Eliminates Channel Overlap.
  • Low ON Resistance, 125 Ω (Typical) Over 15 VP-P Signal Input Range for VDD – VEE = 18 V.
  • High OFF Resistance, Channel Leakage of ±100 pA (Typical) at VDD – VEE = 18 V, Maximum Input Current of 1 µA at 18 V Over Full Package Temperature Range, 100 nA at 18 V and 25°C.
  • Logic-Level Conversion for Digital Addressing Signals of 3 V to 20 V (VDD – VSS = 3 V to 20 V) to Switch Analog Signals to 20 VP-P (VDD – VEE = 20 V) Matched Switch Characteristics, rON = 5 Ω (Typical) for VDD – VEE = 15 V Very Low Quiescent Power Dissipation Under All Digital-Control Input and Supply Conditions, 0.2 µW (Typical) at VDD – VSS = VDD – VEE = 10 V.
  • Binary Address Decoding on Chip, 5 V, 10 V, and 15 V Parametric Ratings, 100% Tested for Quiescent Current at 20 V.
Check Stock

Hustle T-shirt, Hundred Dollar Bill, Mo Money by Zany Brainy

  • This hilarious binary code tee is perfect for any math genius, computer nerd or brainiac! Wear this funny and cool geek chic, binary, computer geek tshirt to college and get plenty of laughs from your intellectual buddies! The ideal gift for the poindexter, nerd, math geek or engineer in your life, this zainy college, binary code tshirt will get them ten out of ten. Confuse people with this humorous math nerd, science geek tee!.
  • Featuring a super funny binary code joke, this awesome smartass, intellectual badass tee is great for wearing to work, college or graduation day celebrations. If you're a coder, gamer or computer programmer then you need this humorous math, science, equation tshirt. Show off your superior knowledge in this hilarious nerdy, geeky, understand binary tee. Check out our other zainy nerd tee designs for more awesome apparel!.
  • Lightweight, Classic fit, Double-needle sleeve and bottom hem.
Check Stock

Trane XL850, TCONT850AC52UA, by Trane, Cert ID: ZC08-14090003

  • Frequency Region: U.S./Canada/Mexico, Z-Wave Library Version: 4.55.00.
  • Device Categories: Thermostats,Controllers.
  • Supported Command Classes: Association,Battery,Binary Sensor,Binary Switch,Clock,Configuration,Door Lock,Firmware Update MD V2,Thermostat Setpoint V2,User Code,Wake Up,Sensor Multilevel V2,Switch.
  • Controlled Command Classes: Association,Battery,Binary Sensor,Binary Switch,Clock,Configuration,Door Lock,Firmware Update,Multilevel Sensor,Multilevel.
Check Stock

Ximimark 5Pcs 16CH Analog Digital Multiplexer Breakout Board Module CD74HC4067 CMOS Precise Module For Arduino

  • This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067. This chip is like a rotary switch - it internally routes the common pin (COM in the schematic, SIG on the board) to one of 16 channel pins (CHANxx)..
  • It works with both digital and analog signals (the voltage can’t be higher than VCC), and the connections function in either direction..
  • To control it, connect 4 digital outputs to the chip’s address select pins (S0-S3), and send it the binary address of the channel you want. This allows you to connect up to 16 sensors to your system using only 5 pins!.
  • Since the mux/demux also works with digital signals, you can use it to pipe TTL level serial data to or from multiple devices. For example, you could use it to connect the TX pins of 16 devices to one RX pin on your microcontroller. You can then select any one of those 16 devices to listen to. If you want two-way communications,you can add a second board to route your microcontroller's TX line to 16 device's RX lines. By using multiple boards, you can create similar arrangements for I2C,SPI,etc..
  • The internal switches are bidirectional, support voltages between ground and VCC, have low “on” resistance and low “off” leakage, and to prev....
Check Stock

12Pcs CD74HC4067 16-Channel Analog Digital Multiplexer MUX Breakout Board Module CD74HC4067 CMOS Precise Module Compatible with DIY

  • CD74HC4067 board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer, use the CD74HC4067 16-channel analog signal switch.
  • It works with both digital and analog signals (the voltage can’t be higher than VCC), and the connections function in either direction.If you want two-way communications,you can add a second board to route your microcontroller's TX line to 16 device's RX lines. By using multiple boards, you can create similar arrangements for I2C,SPI,etc..
  • The internal switches are bidirectional, support voltages between ground and VCC, have low “on” resistance and low “off” leakage, and to prevent crosstalk, perform “break-before-make” switching. The board also breaks out the chip’s “enable” pin, which when driven high, will completely disconnect the common pin (all switches “off”)..
  • To control it, connect 4 digital outputs to the chip’s address select pins (S0-S3), and send it the binary address of the channel you want. This allows you to connect up to 16 sensors to your system using only 5 pins..
  • Since the mux/demux also works with digital signals, you can use it to pipe TTL level serial data to or from multiple devi....
Check Stock

SparkFun MicroMod GNSS Function Board - ZED-F9P GPS Function Board -ZED-F9P Operating Voltage: 3.3V. Board Dimensions: 2.5in x 2.6in x 1.3in

  • ...ntal Position Accuracy: 2.5m without RTK. 0.010m with RTK. Operational Limits: Max G: ≤4G. Max Altitude: 50km (49.7 miles) Max Velocity: 500m/s (1118mph).
  • The Function Board includes a USB-C connector for powering and programming the ZED-F9P directly. The board also includes a selection of 0.1"-spaced PTH pins for signals not connected to the MicroMod M.2 connector including UART2, Geofence and RTK status signals as well as the ZED-F9P interrupt and reset pins..
  • The ZED-F9P is a top-of-the-line module for high accuracy GNSS and GPS location solutions including RTK that is capable of 10mm, three-dimensional accuracy.ZED-F9P Board Dimensions: 2.5in x 2.6in x 1.3in. -Input Voltage: 5V or 3.3V but all logic is 3.3V..
Check Stock