Reviews Audible Continuity

TPI 100 EZ One Button Digital Multimeter with Protective Boot 40 Megaohms Resistance 600V AC/DC Voltage

  • Auto-ranging digital multimeter measures voltage and resistance, and performs continuity tests.
  • Average-sensing meter provides accurate readings when measuring linear loads where the current or voltage has a sinusoidal waveform.
  • Audible continuity sensor confirms that the circuit conducts electricity.
  • Molded rubber boot helps protect against damage from falls, impacts, and abrasion.
  • Meets IEC safety standard 61010 and is certified for Category II installations up to 1000V and Category III installations up to 600V.
Check Stock

Gardner Bender GDT-3200 Digital Multimeter, 7 Funct., 7 Range, Tests AC/DC Volt, Resist, Diode, Continuity, Temp and Battery, Auto Ranging

  • Clear, digital LCD display with backlighting.
  • Full family of digital multi-meters test AC Voltage, DC Voltage, Resistance, Continuity, Temperature, Diodes, and Batteries. Manual and Auto Ranging Styles.
Check Stock

TPI 196 High Resolution Process Control Digital Multimeter with 50000 Count Display, 50 Megaohms Resistance, 750V AC, 1000V DC Voltage, 1A AC/DC Current

  • Auto- and manual-ranging digital multimeter measures current, voltage, and resistance, and performs diode and continuity tests.
  • Average-sensing meter provides accurate readings when measuring linear loads where the current or voltage has a sinusoidal waveform.
  • Audible continuity sensor confirms that the circuit conducts electricity.
  • RS-232 output exports data to a computer (cable and software not included).
  • Meets IEC safety standard 61010 and is certified for Category II installations up to 1000V and Category III installations up to 600V, and Pollution Degree 2 for indoor use.
Check Stock

WeePro Vpro850L Digital Multimeter DC AC Voltmeter, Ohm Volt Amp Test Meter, Electric Tester Ohmmeter with Diode and Continuity Detector, Backlit Display and Insulated Rubber Case Kickstand

  • ...R: Suitable for all kinds of household use and industrial use. Can be use at Household Outlets, Fuses, Batteries (including Vehicles), Automotive Circuit Troubleshooting, Charging System, Testing electronics in Cars etc. It is a AC/DC Voltmeter, Ohm Volt Amp Tester, Electric Ohmmeter, Diode, Resistance and Audible Continuity Detector..
  • Troubleshooting with Speed and accuracy: This Multimeter has a sampling speed of 2 times per second.
  • Built-in a backlight LCD display with 3 ½ digits (1999 count) 0.6”, and high polarity including negative and positive readings..
  • Electronic Tester Multimeter with Over-load Protection and Low-Power Reminder: Use the PTC protection circuit for Resistance, and frequency measurement. Over-load indication "1" will be displayed.
  • Low battery indication will be displayed when battery power is low..
  • Built in Audible Continuity Test Voltmeter and Data Hold : Buzzer will work if the resistance is lower than 30Ω±20Ω.
  • The Weepro digital multimeter comes with an insulated rubber case kickstand to help better grips and easier reading, and with the ABS material use at the same time provide users maximum safety..
  • BUY WITH CONFIDENCE: All sales come with  90-day return refund guarantee, 10-year ....
Check Stock

Amprobe AM-560 Advanced HVAC Digital Multimeter

  • AC/DC Voltage up to 1000V, AC/DC current, resistance, frequency, capacitance, temperature, duty cycle.
  • Dual thermocouple to take simultaneous temperature readings on low/high side of HVAC systems.
  • Low pass filter for variable frequency drives.
Check Stock

Amprobe TL35B Test Leads with Alligator Clips

  • Measures voltage up to 600V AC/DC, AC/DC current and resistance, frequency, capacitance, duty cycle, battery test.
  • Full-featured with non-contact voltage detection, audible continuity and diode test.
  • Large backlit LCD display with data hold and relative zero mode.
Check Stock

Tenma Audio Impedance Meter - 72-6948

  • DC Voltage : 600mV, 3V, 12V, 60V, 300V, 1,000V.
  • DC Current : 120µA, 3mA, 30mA, 300mA, 10A.
  • Resistance : X1Ω, x100Ω, x1kΩ, x10kΩ.
  • Input Impedance : 20kΩ/V (DC), 9kΩ/V (AC).
  • Dimensions : 6.7"(H) × 4.9"(W) × 1.9"(D).
Check Stock

Digital Multimeter Voltmeter Battery Voltage Multi Tester AC DC Volt OHM Amp Current Meter Circuit Continuity Resistance Diode Electrical Tester with Test Leads Backlight LCD Display

  • Accurately Test Full Features: Accurately measures AC/DC voltage, DC current, resistance, continuity test, diode and batteries (1.5, 9, 12v battery settings), transistor HFE. A very useful multimeter tester for solving industrial and household electrical issues. Suitable for outlets, fuses, automotive circuit, testing electronics, science projects, learning electronics, appliance repair, etc..
  • Circuit Continuity & Safe: Audible continuity sensor checks that the circuit or wires conduct electricity. Recommended by many teachers, professionals and engineers. Volt meter tester is designed to troubleshooting with accuracy. Overload protection on all ranges to ensure long-term service life..
  • Easy to Use: 2.7″ large backlit LCD display, data hold, low battery indicator and kickstand make voltage meter taking and recording measurements easier than ever before. Easy to read on large back-light screen for visibility in dimly light areas..
  • Protective Orange Shell with Stand Built: Can be hand held or stood using its fold out stand. Digital multimeters with good protective sleeve made of kind of non-slip slightly soft plastic that will help with drop protection..
  • 2 YEARS Warranty & Included 9V Battery: It’s a suitable voltage tester if you want to do some house....
Check Stock

6000 Counts TRMS Digital Multimeter Auto Ranging - Electrical Meter Multitester for AC/DC Current Voltage Resistance Capacitance Frequency/Duty,Diode/hFE, NCV, Temperature with Auto Backlight

  • ✔AUTO RANGING & WIDE RANGE for accurate measurement of AC/DC Volt 600V, AC/DC Amp current 10A, Resistance 60m ohm, continuity, capacitance, frequency hz /duty, specific 1.5V/9V battery test, Data Hold, NCV (non-contact ac voltage detector), temperature test (℉/℃). 4 digits (6000 counts) high accuracy TRMS multitester..
  • ✔4 MOUNTING OPTIONS DMM to free your hands for taking measurement, including fold-out kickstand, magnet, wrist/hang strap for wearing around your wrist or hanging. Strong magnetic allows you to stick the VOM to a metal object: water heater, chasis, breaker box, etc. Portable small size voltmeter with large display, easy to carry along in tool bag..
  • ✔AUDIBLE VISUAL CONTINUITY TEST with alarm buzzer and indicator light, quick and neat response in continuity tone, handy for test on diodes and LEDs, hFE, capacitors and resistors. Ideal multimeter for electronic, hobbyist, HVAC, household, automotive, industrial electrical troubleshoot.
  • ✔AUTO LCD BACKLIGHT + AUTO SHUT OFF after 15 minutes of inactivity to save your battery, manual power off optional. Automatic LCD backlit screen based on ambient brightness condition, and lights up dial light indicator for easy reading in dim area..
  • ✔w/ ALL ACCESSORIES YOU NEED for this DVOM: multi....
Check Stock

Amprobe AM-510 Commercial/Residential Multimeter with Non-Contact Voltage Detection

  • Measures voltage up to 600V AC/DC, AC/DC current and resistance, frequency, capacitance, duty cycle, battery test.
  • Full-featured with non-contact voltage detection, audible continuity and diode test.
  • Large backlit LCD display with data hold and relative zero mode.
Check Stock

Fluke 373 True-RMS AC Clamp Meter

  • AC/DC current measurement from 0.001 up to 100 A. which makes it a great tool for measuring parasitic draws and AC/DC voltage measurement up to 600 volt.
  • Small jaw: 1.2 inches (W) x 0.53 inches (D) (300x13.4millimeters) with clamp opening up to 1/2 inch (12.5 millimeters).
  • Peak and Data hold functions with one rotary switch operation.
  • 2 readings per second sampling and continuity check with audible indicator.
  • Test leads soft carrying deluxe pouch and batteries included.
Check Stock

Fluke 325 Clamp Multimeter AC-DC TRMS

  • Digital clamp meter measures AC current to 400 amp, AC and DC voltage to 600V, and resistance to 4 kilohms.
  • True RMS sensing meter provides accurate readings when measuring linear or non-linear loads, regardless of waveform.
  • Jaw opening measures current in a conductor up to 30mm without touching or interrupting the circuit.
  • Audible continuity sensor confirms that the circuit conducts electricity.
  • Meets IEC safety standard 61010-1, and is rated for CAT IV installations to 300V and CAT III installations to 600V.
Check Stock

Amprobe AM-500 Digital Multimeter

  • listed by 3rd party safety labs CSA, ACMA, and has been assessed to meet high safety, health, and environmental protection requirements within the European Economic Area (EEA).
  • Verify presence of AC and DC voltage in electrical sockets, extension cords, batteries and other electrical circuits.
  • Measurements: Voltage up to 600V AC/DC, AC/DC Current and Resistance.
  • Install, troubleshoot or repair light fixtures, fans or appliances.
  • Micro amps function to troubleshoot flame sensors used in gas appliances.
  • Audible continuity Diode Test Data hold Auto power off Low battery warning.
Check Stock