Reviews Atwood Gas Valve

Fenwal Atwood 31501

  • The ignition control board performs all the functions necessary to turn the furnace on and keep it running.
  • Powered with 12V DC, the board sends signals to open the gas valve and emits a high output voltage that creates an ignition spark to light the burner..
  • Compatible with : Atwood Hydro Flame Furnaces: 7912-II, 7916-II, 7920-II, 8012-II, FA 79D, HF 80D, DC82 25-32, DC82 35-41, FA 76D, FA 78 25-32, FA 72D, 8500-IV Series, 8500-III Series, 85-II Series, 85-I Series, 8900-I DC Series, 8900-II DC Series, 8900-III DC Series, AFSD12, AFSD16, AFSD20, AFMD20, AFMD25, AFMD30, AFMD35, DFMD20111, DFMD25111, DFMD30111, DFMD35111 DFSD12111, DFSD16111 and DFSD20111..
  • If you're control board uses the older edge connection, then the Dometic 35325 adapter will be required for installation..
Check Stock

NipponAsia aftermarket Part 31501 Circuit Board Replace for Atwood，31501 Ignition Control Board Replace for DOMETIC Hydro Flame Corp,Fit for Models 85-IV 16 85-IV 20 85-IV 25.

  • 12VDC RV Gas Ignition Fan Control Pin Connect Board and EC Adapter.
  • USE only in AtwoodHydroflame Rv Furnace that Specify Atwood P/N 31501 or 33488.
  • See picture of instruction sheet or below..
  • ATWOOD 31501 FURNACE IGNITIONBOARD This works with Model #s: 7912-II, 7900-II 16 & 20, 8012-II, FA 79D, HF 80D, DC82 25-32, DC82 35-41, FA 76D, FA 78....
Check Stock

Camco Olympian RV Wave-3 LP Gas Catalytic Safety Heater, Adjustable 1600 to 3000 BTU, Warms 130 Square Feet of Space, Portable and Wall Mountable

  • 12VDC RV Gas Ignition Fan Control Pin Connect Board and EC Adapter.
  • USE only in AtwoodHydroflame Rv Furnace that Specify Atwood P/N 31501 or 33488.
  • See picture of instruction sheet or below..
  • ATWOOD 31501 FURNACE IGNITIONBOARD This works with Model #s: 7912-II, 7900-II 16 & 20, 8012-II, FA 79D, HF 80D, DC82 25-32, DC82 35-41, FA 76D, FA 78 25-32, FA 72D,85-IV 16, 85-IV 20, 85-IV 25, 85-IV 31, 85-IV 35, 85-III 16-20, 85-III 25, 85-III 31-35, 85-II 25, 85-II 31-35, 85-I 16-20, 85-I 25, 85-I 31-35, 89-I DC, 89-II DC, 89-III DC.
Check Stock

Camco 11653 Water Heater Drain Valve Wrench

  • Fits petcock drain valve on Suburban and Atwood water heaters.
  • Hollow handle allows water to flow to front of heater.
  • Open or close stubborn drain valves without scraping your knuckles.
  • Adjustable handle allows access to hard to reach valves.
Check Stock

Watts VAGV075 3/4 Inch Earthquake Gas Shutoff Valve

  • WATTS EARTHQUAKE GAS SHUT OFF VALVE: Automatically shuts of gas in the event of an earthquake..
  • NATURAL GAS EARTHQUAKE SHUT OFF VALVE: Reduce property destruction from earthquake related gas fires..
  • EASY TO INSTALL GAS METER EARTHQUAKE SHUT OFF VALVE: Save time and energy during installation due to its lightweight, compact design..
  • BEST SELLING EARTHQUAKE SHUT OFF GAS VALVE: Maximum pressure is 10 PSI, fits standard NPT..
Check Stock

Atwood (93851 Circuit Board for Gas/Electric Combo Water Heater

  • Atwood Water Heater Replacement Parts – Circuit Board for GCH6A-10E, GC6AA-10E, GC10A-4E and GCH10A-4E Gas/Electric Water Heaters 93851.
Check Stock

Philips 458471 Hue Smart Bridge (Compatible with Amazon Alexa, Apple HomeKit and Google Assistant), White Ambiance

  • A Smart Add-on for your Existing Water or Gas Ball Valve - Simply add this smart valve controller to your water valve or gas shutoff valve, you can simple control the water supply or turn off gas valve from anywhere at any time with your smartphone, using free Smart Life app..
  • Compatible with Amazon Alexa and Google Home - When paired with the Amazon Alexa or Google Assistant, the smart shut off valve gives you hands - free voice control over your home..
  • Wide Application - The smart shut off valve is compatible with water pipe ball valves, electric/ manual control switches, and natural/ liquid/ tap gas valve. Enjoy home automation like automatic irrigation of garden, farmland.
  • timing water supply for feeding farm, stockyards.
  • remote control the gas valve when you are leaving home in haste..
  • Easy Installation - Just need screw to fix over your existing levered ball valve, no addition plumbing required. With specially designed metal clamping ring, it is adjustable to compatible with most widely used pipe size like 1/2.
Check Stock

279834 Gas Valve Ignition Solenoid Coil Kit by Beaquicy - Replacement Part for Ken-more Whirlpool Samsung Estate Magic Chef Dryer - Replaces ap3094251

  • ✅ 【ULTRA DURABLE PRODUCT】: The 279834 Gas Valve Coil Set is suitable for dryers. The 279834 dryer valve ignition solenoid kit has a 3-terminal boost/hold coil and a 2-terminal secondary coil.This is a safety mechanism to ensure that there is no unsafe gas accumulation in your device. When the igniter reaches a sufficiently high temperature, these coils open the gas valve, allowing gas to enter the burner..
  • ✅ 【PRODUCT PACKAGE】:Includes 1 Pair x 279834 dryer gas valve ignition solenoid coil kit.279834 Gas Valve Ignition Solenoid Coil Kit includes two new gas coils. One coil is the primary coil and the other is the safety coil. No matter which component stops working, it should be replaced in pairs.Because both coils must be operable,then the valve can be opened,and the heating element will work normally.The kit can replace most new style gas coils..
  • ✅【365 DAYS WARRANTY】:279834 Gas Valve Coil Set supports 365 days return and exchange.Our company attaches great importance to the shopping experience of each customer.Risk-free shopping, If you have any quality problem during warranty period, please contact customer service in time. We will try our best to solve the problem. Customer satisfaction is our tireless pursuit..
Check Stock

Dometic Atwood Mobile Products 91367 P.C. Board Potted Gas Only

  • Compatible with: G6A-6E, G6A-7E, G6A-8E, GH6-6E, GH6-7E, GH6-8E, G10-1E, GH10-1E, G10-2E G10-3E, G6A-2E, GH6-3E, GCH6-4E, GCH6-6E, GCH6-7E, GC6A-7E.
Check Stock

SkyTech AF-LMF/R Remote Controlled Fireplace Gas Valve Control Kit

  • Millivolt safety pilot kit with remote for use with 18 to 30 inch gas logs.
  • Manual On/Off gas valve kit with On/Off remote control.
  • 225 degree rated valve with exclusive safety seal within the gas valve.
  • Includes quick mount pilot assembly, damper clamp, valve, solenoid, flex line, and remote.
  • For use with Natural Gas (LP conversion kits available).
  • Valve kit measures 3 3/4″ W x 4″ D 2 3/4″ H.
Check Stock

KIPA Gas Fuel Tank Valve Petcock For JOG 50 Razz 50 AXIS 50 SH50 JOG50 CY50 50cc Scooter ATV Buggy OEM # 2EK-24500-00 Petcock Valve

  • Gas Fuel Tank Valve Petcock For JOG 50 CY 50 JOG50 CY50.
  • Gas Fuel Tank Valve Petcock For Razz 50 AXIS 50 SH50.
  • Gas Fuel Tank Valve Petcock For 50cc Scooter SH50 CY50.
  • Gas Fuel Tank Valve Petcock For CY50B CY50D CY50E.
  • Gas Fuel Tank Valve Petcock For OEM # 2EK-24500-00.
Check Stock

RV Water Heater Anode Rod - Magnesium Anode Rod Suburban Water Heaters Suburban & Morflo - 9.25''Long & 3/4'' Thread - Long Lasting Tank Corrosion Protection - 1pc

  • 【Water Heater Replacement Parts】: The rv water heater replacement parts are designed for Atwood 93868 water heater, it is a necessary accessory for safe operation of RV propane water heaters.
  • 【Check The Gap Before Installation】: The gap between the sparking probe and the ground probe should be 1/8 inch. The probes should be clean and free of cracks, flaking, and corrosion. Position the probes so that they are in the path of the gas flow. Remove the gas valve from the circuit and turn the unit on. If you see a spark jumping from the ceramic to the ground rod or bracket, replace the spark probe.
  • 【Model Compatibility】：The RV water heater igniter fits for GCH6-4E, GCH6-6E, GCH6-7E, GCH6A-10E, GC6AA-10E, GC6A-7E, GH6-3E, GH6-3E, GH6-4E, GH6-6E, GH6-7E, GH6-8E, G6A-2E, G6A-3E, G6A-4E,G6A-8P,G6A-6E, G6A-7E, G6A-8E, GCH6A-7E, GCH6A-8E, GCH6A-9E, GC6AA-7E, GC6AA-8E, GC6AA-9E, GCH10A-2E, GCH10A-3E, GC10A-2E, GC10A-3E, G10-1E, GH10-1E, G610-3E,GH610-3E, G10-2E, G10-3E, GC10-1E, GC10-2E, GH10-2E, GH10-3E, GC10A-4E, GCH10A-4E, XT 6 and 10 gallon spark ignition models.
  • 【Easy To Install】: The ignition needle is very easy to install, just remove the old water heater igniter and install the new one in the original position.
Check Stock

UTasko 93868 Water Heater Replacement Parts, RV Spark and Sensor Electrode for Atwood 93868 Water Heater, 2-Prong Water Heater Igniter Repair Part for Atwood RV Water Heater

  • 【Water Heater Replacement Parts】: The rv water heater replacement parts are designed for Atwood 93868 water heater, it is a necessary accessory for safe operation of RV propane water heaters.
  • 【Check The Gap Before Installation】: The gap between the sparking probe and the ground probe should be 1/8 inch. The probes should be clean and free of cracks, flaking, and corrosion. Position the probes so that they are in the path of the gas flow. Remove the gas valve from the circuit and turn the unit on. If you see a spark jumping from the ceramic to the ground rod or bracket, replace the spark probe.
  • 【Model Compatibility】：The RV water heater igniter fits for GCH6-4E, GCH6-6E, GCH6-7E, GCH6A-10E, GC6AA-10E, GC6A-7E, GH6-3E, GH6-3E, GH6-4E, GH6-6E, GH6-7E, GH6-8E, G6A-2E, G6A-3E, G6A-4E,G6A-8P,G6A-6E, G6A-7E, G6A-8E, GCH6A-7E, GCH6A-8E, GCH6A-9E, GC6AA-7E, GC6AA-8E, GC6AA-9E, GCH10A-2E, GCH10A-3E, GC10A-2E, GC10A-3E, G10-1E, GH10-1E, G610-3E,GH610-3E, G10-2E, G10-3E, GC10-1E, GC10-2E, GH10-2E, GH10-3E, GC10A-4E, GCH10A-4E, XT 6 and 10 gallon spark ignition models.
  • 【Easy To Install】: The ignition needle is very easy to install, just remove the old water heater igniter and install the new one in the original position.
Check Stock