Reviews Attwood Trailer Light Inline Circuit Testers

12v Magnetic Towing Tow Light Kit Trailer Rv Tow Dolly Tail Towed Car Boat Truck

  • Complete Trailer Light Kit: This Trailer Light Kit includes 2 combination tail and brake/turn signals lights, 2 amber LED marker lights ,25-ft wiring harness,license plate bracket and mounting hardware bag, everything you need to do the install included..
  • IP68 Waterproof and Submersible trailer lights: The circuit board is completely sealed and IP68 waterproof, which protects the board from short circuit even soak in the water, it can work long hour in rainy days, fog day or snow day, it is totally submersible(Test Underwater light for 24 hours)..
  • High Visibility LED Trailer Tail Lights: Super clear and brighter SMD 5050 lamp beads with Halo Glow design produces a super fashion light, no glare, Up to 50,000 hrs life expectancy.
  • Compliant with DOT standards, perfect replacement trailer lights for RV, tractors, canoes,towing vehicle, truck, trailer, boat, bus, Lorry, Van, caravan, snowmobile etc.
  • 25ft wiring harness, so that it is long enough to reach end of trailer,instruction included and 1 year warranty..
Check Stock

Kuryakyn 2595 Motorcycle Accessory: Plug & Play Trailer Wiring with Relay Harness for 2014-19 Harley-Davidson FLH/FLT Motorcycles with 5-Wire Trailer , Black

  • Allows you to safely and effectively apply the load from your trailer lighting the the battery.
  • Eliminates overloading stock lighting or accessory circuits.
  • Relay harness utilized inputs from the motorcycle to direct power from the battery to the appropriate trailer lighting circuit.
  • Kit provides standard 5-wire output (run, brake, left turn, right turn, ground).
  • Does not include receptable kit due to varies style required by trailer manufacturer.
  • Includes (1) relay module 5 wire, (1) 5 pin trailer plug harness, (1) inline blade style fuse holder, and (1) hardware kit.
  • Suggested for installation (not included): wire stripper/cutter, wire crimpers, #2 phillips screwdriver, socket and ratchet set, in-lbs (Nm) torque wrench.
  • Compatible with 5-wire trailers on Harley-Davidson models: '14-'19 Electra Glides, Road Glides, Street Glides (excludes '14-'15 FLHTKSE, '15 FLTRUSE), and Road King Special.
Check Stock

Attwood 14065-7 Submersible Multi-Function LED Boat Trailer Light Kit

  • Complete kit designed for trailers under 80 inches wide to outfit your trailer with safety lights.
  • Offers (2) submersible LED trailer lights with multi-function modes: stop, tail, turn.
  • Includes: license plate bracket, wiring harness, full installation hardware.
  • Conforms to applicable U.S. FMVSS and Canadian CFMVSS standards.
  • Attwood products are both compatible and reliable, engineered and built with a never-fail attitude.
Check Stock

Attwood 11220-3 Roller Panel Spool/Keel Bracket Roller Assembly (11210 roller and 11252 bracket)

  • Reliably protects a boat’s keel as it rolls onto and off a trailer.
  • Complete assembly with Attwood 11210 roller and 11252 bracket.
  • Mounts to trailer cross roller assembly for smooth and protected boat loading and unloading.
  • Sturdy bracket is made of formed, zinc-plated steel panel.
  • Plate has a ½-inch-wide slot for adjustment.
Check Stock

CURT 56130 Non-Powered 3-to-2-Wire Splice-in Trailer Tail Light Converter, 4-Pin Wiring Harness

  • RELIABLE POWER. This non-powered 3-to-2-wire taillight converter provides a dependable splice-in trailer wiring harness option, if a CURT custom trailer wiring harness is not available for your vehicle.
  • STANDARD OUTPUT. This tail light converter converts the 3-wire vehicle electrical system to standard 2-wire trailer wiring and provides a standard 4-way flat socket to connect the taillights, brake lights and turn signals for towing.
  • COLOR-CODED WIRES. To make installation faster and easier, this trailer wiring converter splices into your vehicle using color-coded wires (3.0 amps signal circuit, 5.0 amps taillight circuit).
  • READY TO INSTALL. This trailer light converter comes ready to install on your vehicle. It includes snap locks for secure connection of the wires, and it requires no heavy-duty flashers or direct battery connection.
  • WEATHER-RESISTANT. To help protect this trailer light converter from the elements, it comes with a rubber dust cover for the 4-pin wiring connector, shielding it from rain, dirt, dust and more when not in use.
Check Stock

LINKITOM Submersible LED Trailer Light Kit, Super Bright Brake Stop Turn Tail License Lights for Camper Truck RV Boat Snowmobile Under 80" Inch

  • Trailer Light Kit : Led boat trailer light kits has everything you need,includes two stop turn signals LED marker lights, two amber clearance lights, one 22 feet and one 4 feet wiring harness, license plate bracket, 4pcs complimentary reflective sticker..
  • IP68 Waterproof and Submersible: There is no screw on the lamp shade , the LED trailer lights are completely welded together, The circuit board of tail light is seal. A drain hole is designed to pull out all the water. This is to guarantee that water will not damage the diodes or circuit board. excellent tightness makes it be definitely waterproof and submersible.Please install the trailer taillights with the drain hole downwards..
  • Compliant with DOT standards: The lamp shade of utility trailer light kit with a new ABS material, 100% compliant with DOT standards.
  • 25ft wiring harness have more durable than the traditional copper coated aluminum wires and split Y-style color coded harness. Fully operable in inclement weather, these trailer lights are tough and durable for the long term..
  • Widely Used : Widely applicable to 80 Inch wi....
Check Stock

Tekonsha ZCI™ Zero Contact Interface Universal ModuLite® & Installation Kit

  • Activates a trailer's stop/turn/tail/running lights without cutting or splicing into your vehicles wiring system - simply snap on included current sensors.
  • Use when: trailer has more than 1 light assembly per side and is equipped with multiple clearance or running lights.
  • if tow vehicle may tow a variety of trailers.
  • Re-settable short circuit/overload protection - guards itself and the tow vehicle from shorts and wiring install mishaps.
  • rated at 4.2 amps for turn/stop circuits, 7.5 amps for taillight circuit.
  • Works on all vehicle types including standard, PWM and/or multiplex systems, ensuring full brightness of the trailer lights during operation.
  • ZCI sensor technology and direct connection to the tow vehicle battery, eliminates all electrical connection and interference with the tow vehicle electrical system.
  • Isolates trailer light operation from tow vehicle's electrical system.
  • 5 amps for taillight trailer circuits. Works with low side Switched vehicles.
Check Stock

Linkitom New Halo Rectangle Submersible LED Trailer Light, Super Bright Brake Stop Turn Tail License Lights for Camper Truck RV Boat Snowmobile Over 80\ Inch

  • Set of 2 pack(Unique halo glow and solid light pattern design, different from other trailer taillights on the market), designed for 12v system. left light has functions as Stop/ Turn/Tail Rear/ Side reflector Side Marker and License Illuminator, right light has functions as Stop/ Turn/Tail Rear/ Side reflector Side Marker.
  • IP68 Waterproof and Submersible: There is no screw on the lamp shade , the LED trailer lights are completely welded together, The circuit board of tail light is seal. A drain hole is designed to pull out all the water. This is to guarantee that water will not damage the diodes or circuit board. excellent tightness makes it be definitely waterproof and submersible.Please install the trailer taillights with the drain hole downwards..
  • Compliant with DOT standards: The lamp shade of utility trailer light kit with a new ABS material, 100% compliant with DOT standards.
  • Easy to instal, The distance of two studs bolts is standard 2”, Direct replacement for your original incandescent bulb unit.
  • Widely Used : Widely applicable to 80 Inch width tractor, such as truck, trailer, boat, bus, lorry, van, caravan, snowmobile, etc. Please make sure wires connect correctly and no electronic short before underwater..
Check Stock

Nilight - TL-34 2PCS Steel Trailer Light Boxes Housing Kit w/6Inch Oval Red LED Trailer Tail Lights 2 Inch Round Red LED Side Marker Lights w/Grommet Plugs Wire connectors, 2 Years Warranty

  • Trailer towing Light come with 5 functions, 7 Pin Plug and strong magnetic, suitable for USA standard 12V trailer, Caravan , Low loaders , Jet ski Boats Break downs etc.
  • Out light come with 5 functions: Rear Position, Direction Indicator, Brake, Reflector, Number plate light(Right light no license plate light), but not has the back up lights.
  • Red brake lights and flashing orange Direction Indicator lights control by the separate circuit. Red - Brake, Green Right Turn Signal, white - Ground, Yellow - left turn signal and Black - License plate/Running.
  • 4x3.5inch good tail light kit can use on any trailer.
  • 24ft cable to light with a Standard 7 Pin Plug, fit for flat Pin Adapter, then 8ft cable to go across to the the next light. Some trucks, cars, and SUVs are 4-wire systems, this trailer light is not fit for them, please confirm that this trailer light is suitable for the plug socket on your vehicle before ordering..
  • IP68 Waterproof and Submersible: All sealed, which means that water will not damage the diodes or circuit board, excellent tightness makes it be definitely waterproof and submersible.
  • Comes with 2 strong magnetic on the lights for quick and easy fitting an removal of the light.they handle bumpy roads without falling off. Easy to use, plug in a....
Check Stock

Automotive Power Circuit Probe Kit, 12V 24V Car Circuit Tester Electrical System Tool, Digital Voltage Tester, Multimeter, Short Finder,Relay Fuse Tester,AC DC Diode Resistance Tester

  • 【Widely Application】This automotive electrical system test tool is the perfect choice for automotive circuit probe tester. Unlike other circuit testers that require you to use a variety of tools to troubleshoot electrical system problem, our circuit testers are perfectly capable of performing multiple types of services such as continuity testing, component activation, fuse test, checking bad ground indicator, detect voltage and current, positive and negative power supply..
  • 【Portable Quick】When the vehicle's headlights, turn signals, lift windows, sunroofs and other functions fail, our power circuit probe kit can output positive and negative power to check whether circuit components are normal, and can also perform continuity checks and resistance checks. Through these checks and diagnoses whether the path of the car circuit is interrupted, it can be found which parts of the circuit are intact, which parts are bad..
  • 【Overload Protection】Our automotive circuit tester tools has a built in 10 amp circuit breaker to prevent overloading and cooking a circuit.The output current can be reversed to form a loop power, and when the current exceeds 20A, This po....
Check Stock

Linkitom Magnetic LED Trailer Towing Light Kit, 24ft Cable with 7 pin plug, IP68 Waterproof, DOT Approved, for 5 Wire Vehicle

  • Some trucks, cars, and SUVs (like 2005 Nissan Frontier 4x4 nismo, 2001 Ford F550)are 4-wire systems, this trailer light is not fit for them, because Red brake lights and flashing orange Direction Indicator lights control by the separate circuit.
  • Just the 2 yellow light will lighting (not red brake light lighting)when brake if use it to 4-wire systems car..
  • Trailer towing Light come with 5 functions, 7 Pin Plug and strong magnetic, suitable for USA 5 wire shstems standard 12V trailer, Caravan , Low loaders , Jet ski Boats Break downs etc.
  • Out light come with 5 functions: Rear Position, Direction Indicator, Brake, Reflector, Number plate light(Right light no license plate light), but not has the back up lights, 24ft cable to light with a Standard 7 Pin Plug, fit for 5-7 wire flat Pin Adapter, then 8ft cable to go across to the the next light.
  • IP68 Waterproof and Submersible: All sealed, which means that water will not damage the diodes or circuit board, excellent tightness makes it be definitely waterproof and submersible.
  • Comes with 2 strong magnetic on the lights for quick and easy fitting an removal of the light.they handle bumpy roads without falling off. Easy to use, plug in and go..
Check Stock

Trailer Light Led, Boat Trailer Light Kit, IP68 Waterproof Led Trailer Lights, Combo Stop Turn Running Brake License Plate Lights for Trailers, Truck, Boat etc

  • Multifunction Trailer Lights: This combination trailer tail lights work as stop, turning, brake, tail, rear reflector, reflector and side marker light..
  • Submersible Rectangular Trailer Lights: With IP68 Waterproof rating, makes it ideal for the trailers submerged, like boat trailer..
  • Fully Compliant with DOT: Construct with super bright LED lights and 100% sealed circuit board to ensure high visibility, even inclement weather, provide safe driving..
  • Wire Tips: Left Side: White Wire: Ground.
  • White+Yellow: High Brightness, used as Brake Light.
  • White+Brown: Low Brightness, used as Running Light/Left License Plate Lamp.
  • White+Green, : High Brightness, used as Brake Light.
  • White+Brown: Low Brightness, used as Running Light..
  • Wide Application: The trailer lights are perfect for boat truck trailer under and over 80 inch width. Can be widely used on truck, trailer, boat, bus, lorry, van, caravan, snowmobile, etc..
Check Stock

12V Trailer Led Light Kit, 2x Square Led Stop Turn Tail Brake License Plate Running Lights w/ 25ft Wiring Harness/6x Mini Marker Lights/15' 11LED Trailer Tail Brake Light Bar/License Plate Bracket

  • This 12v led trailer lights kit includes 2Pcs square rear combination tail lights, 6Pcs Mini Oval side fender marker lights (2Red+4Amber), 1Pc 15.5 Inch Trailer 3rd brake identification tail light bar, 25ft wiring harness with 4-flat plug(long enough to reach end of trailer), license plate bracket, mounting hardware. This trailer led light kit has everything you need to upgrade your trailers at once.
  • This boat trailer lights led submersible kit has multi functions: stop light, brake light, turn signal light, tail light, running light, rear reflex reflector, side marker light, side clearance lights, side reflex reflector, license plate illuminator, clearance Light, third 3rd brake light bar.
  • Wiring Tips: white wire is ground, yellow wire is high brightness for brake Light and brown is low brightness as Running Light/Left License Plate illuminator(Square tail Lights).
  • white is ground, red is high Brightness for brake/stop/turn light, black is low brightness as running Light(15.5″ led trailer light bar).
  • white is ground andblack is positive(mini side marker lights).
  • Brightness: Square LED trailer light has 15 Diodes (12 Red+3 Red) as stop, turn, tail, side marker, side reflex, and rear reflex functions and on left side Built-in license plate light(3 w....
Check Stock