Reviews Attic mounted Fans

Tamarack TTi HV1600 R38 Whole House Fan (2 Speeds), Insulated Quiet Cool Attic Fan with Remote and Self-Sealing Doors, Duct Free Whole House Attic Fan Improves Air Quality

  • QUALITY AIRFLOW - Tamarack Technologies’ remote-controlled HV1600 Whole House Fan allows you to avoid using your AC when the outdoor air is cooler than the indoor air. The attic exhaust fan pushes hot air, indoor air pollutants, allergens, moisture and odors out through attic vents or gables while pulling cool, fresh air naturally cooling your home and improving the indoor air quality..
  • SELF-SEALING DESIGN - The attic fan includes R38 insulated doors that open automatically when the fan is operating and seal shut automatically when the fan is off. The insulated door design prevents cool air from escaping your living area to the attic..
  • COST-EFFICIENT - Our whole house fans for home have insulated doors that prevent heat loss through the attic during the cooler months. Installing a Tamarack Whole House Fan reduces energy consumption and saves money. Our household ventilation fans use only 10% of energy a central air conditioning system uses and reduces your energy bill..
  • LONG-LASTING AND MADE IN USA - Made with durable metal material, this quiet cool whole house fan is covered by a lifetime manufacturer's warranty. Th....
Check Stock

Westinghouse 0152500 Saf-T-Bar for Ceiling Fans

  • Saf-T-Box allows safe, simple installation of fans and fixtures, ideal for new construction and where attic is accessible.
  • Supports ceiling fans up to 70 pounds or lighting fixtures up to 150 pounds.
  • Includes three knockouts for Conduit or Romex, one Romex clamp.
  • 15.5-cubic-inch wiring capacity, electrical box is 1-1/2 inches deep.
  • Includes Saf-T-Cap, mounting hardware and instructions.
Check Stock

Westinghouse Lighting 0107000 Saf-T-Grid for Suspended Ceilings

  • Saf-T-Box allows safe, simple installation of fans and fixtures, ideal for new construction and where attic is accessible.
  • Supports ceiling fans up to 70 pounds or lighting fixtures up to 150 pounds.
  • Includes three knockouts for Conduit or Romex, one Romex clamp.
  • 21.5-cubic-inch wiring capacity, electrical box is 2-1/8 inches deep.
  • Includes Saf-T-Cap, mounting hardware and instructions.
Check Stock

Cool Attic CX1500UPS Power Gable Ventilator Fan

  • VENTILATOR FAN: This is a 1300 CFM Power Attic Gable Mount Ventilator with a 2.6 Amp thermally protected motor, a galvanized steel flange, and an automatic thermostat.
  • GABLE MOUNT FAN: It mounts easily in the gable of your home, behind existing louvers or any other gable louvers of your choice. It will provide ventilation without modifying your roofline, or where roof-mounting is impractical. It mounts easily in gable behind louvers.
  • ATTIC FAN: The Cool Attic Gable-Mount Attic Ventilator Fan offers effective power attic ventilation to reduce heat buildup, equalize temperatures inside and outside the attic. It has 14-inch fan with 600-square-inch intake. It is galvanized steel construction.
  • EASY INSTALLATION: It cools attic up to 1,850 square feet and 3.4-amp, 115-volt, 60-Hz thermally protected motor, 1,300 CFM rating at 0.03 static pressure when used with model No. CX2121 automatic shutter. It helps keep your home cooler and reduce utility costs.
  • HOME ROOF COOLING FAN: This fan helps prevent weather-induced home deterioration and make living areas more comfortable – all while helping reduce the operating cost of air conditioning. Easy to install with no holes in roof.
Check Stock

Maxx Air Professional Grade Gable Mount Power Attic Ventilator with 2.6-Amp 60-Hz Motor and 14-Inch Blade

  • VENTILATOR FAN: This is a 1300 CFM Power Attic Gable Mount Ventilator with a 2.6 Amp thermally protected motor, a galvanized steel flange, and an automatic thermostat..
  • GABLE MOUNT ATTIC FAN: It mounts easily in the gable of your home, behind existing louvers or any other gable louvers of your choice. It will provide ventilation without modifying your roofline, or where roof-mounting is impractical..
  • ATTIC FAN: The Cool Attic Gable-Mount Attic Ventilator Fan offers effective power attic ventilation to reduce heat buildup, equalize temperatures inside and outside the attic. It has 14-inch fan with 600-square-inch intake. It is galvanized steel construction..
  • EASY INSTALLATION: It cools attic up to 1,850 square feet with a 2.6-amp, 115-volt, 60-Hz thermally protected motor, 1,300 CFM rating at 0.03 static pressure when used with model No. CX2121 automatic shutter. It helps keep your home cooler and reduce utility costs..
  • HOME ROOF COOLING FAN: This fan helps prevent weather-induced home deterioration and make living areas more comfortable - all while helping reduce the operating cost of air conditioning. Easy to install with no holes in roof required..
Check Stock

Maxx Air Professional Grade Gable Mount Power Attic Ventilator, Premium Attic Ventilation for Gable, Home, Shed, Portable Building (2500 Sq. Feet, Green)

  • VENTILATOR FAN: This is a 1650 CFM Power Attic Gable Mount Ventilator with a 2.6 Amp thermally protected motor, a galvanized steel flange, and an automatic thermostat..
  • GABLE MOUNT ATTIC FAN: It mounts easily in the gable of your home, behind existing louvers or any other gable louvers of your choice. It will provide ventilation without modifying your roofline, or where roof-mounting is impractical..
  • ATTIC FAN: The Cool Attic Gable-Mount Attic Ventilator Fan offers effective power attic ventilation to reduce heat buildup, equalize temperatures inside and outside the attic. It has 14-inch fan with 600-square-inch intake. It is galvanized steel construction..
  • EASY INSTALLATION: It cools attic up to 2,500 square feet with a 2.6-amp, 115-volt, 60-Hz thermally protected motor, 1,300 CFM rating at 0.03 static pressure when used with model No. CX2121 automatic shutter. It helps keep your home cooler and reduce utility costs..
  • HOME ROOF COOLING FAN: This fan helps make living areas more comfortable while helping reduce the operating cost of air conditioning. Easy to install with no holes in roof required..
Check Stock

Westinghouse Lighting 140000 0140000 Saf-T-Brace for Ceiling Fans Metalic

  • Includes mounting hardware and instructions.
Check Stock

110V Hybrid-Solar Adapter - Only for Remington Solar Attic Fans - Allows Your Attic Vent Fan to Run at Night, Automatically

  • "Plug-and-play" adapter for All "Remington Solar" Brand Attic Fans!.
  • Your Remington Solar will use the solar panel if the sun is up, when the sun goes down and if your attic is still over 80°F, then the adapter will switch to your house power!.
  • Simple, common-sense solution to evening ventilation… Also ideal for long periods of overcast skies!.
  • Only for use in 'Remington Solar" brand attic fans!.
  • 30-Day Money Back Guarantee & 12 month warranty!.
Check Stock

BJTDLLX 12 Steps Wall Mounted Folding Stairs, Attic Steps Pull Down Attic Stairs Retractable Attic Ladder Al-Mg Alloy Loft Ladder Stairs 3m Height Attic Steps with Armrests (Weight Capacity 1000lb)

  • 【Attic Wall Stairs】Wall-mounted attic wall staircases are becoming more and more popular recently due to their simplicity, elegance, practicality, retractability and small footprint. Attic Wall Ladder Stairs meet most people's needs for a stylish and uncluttered lifestyle..
  • 【Wall Mounted】This attic wall ladder is wall mounted, the frame size is 60x70cm (please refer to the picture), the drop-down attic staircase can install the frame on the vertical wall or vertical plane, but cannot be installed on the ceiling and pulled from the ceiling down..
  • 【12 Steps】The 12-step drop-down attic staircase aluminum has a maximum vertical height of 3 meters/9.8 feet and a step width of 43 cm/16.93 inches. Wall Mounted Loft Wall Ladder Stairs can be used with a simple pull down. You can remove steps to lower the maximum height..
  • 【1000lb Load Capacity】The maximum load capacity of wall mounted attic stairs is 1000 lbs, the step ladder can be widely used in attics and cabin tops, making it easier for you to go up and down the stairs (for your safety, please do not stand multiple people at the same time)..
  • 【Aluminum-magnesium Alloy Material】The attic wall ladder stairs are made of aluminum-magnesium alloy material, which is stable in quality, d....
Check Stock

Westinghouse Lighting 0110000 Saf-T-Brace for Ceiling Fans, 3 Teeth, Twist and Lock - 2 Pack

  • Includes mounting hardware and instructions.
Check Stock

Tech Drive Bathroom fan 110 CFM, 1.2Sone No Attic access Needed Installation,Very Quiet Bath Ventilation and Exhaust Fan, Ceiling Mounted Fan,White Plastic Grille

  • Very quiet bathroom fan (1.2 sones) and Strong air movement (110CFM) for bathroom up to 110 Sq. Ft. Recommened for use in large room.
  • Two installation options: 1. For New Construction: It can attaching the fan housing mounts to the ceiling joists,if spacing between is 12in. ( if spacing between16 in.- 24 in, It can using suspension brackets.) 2. For Existing Construction : With No attic access installation and replaces most existing bathroom fans. it can be done entirely from the room-ceiling side – no attic access needed installation.
  • Low profile white grill cover,Housing size: 9in x 8.5in x 6in with 4in duct. ceiling mounting Opening: 9.25in x 8.9in..
  • Efficient and quiet,excellent motor perfomance, working at least 25000 hours.
  • Energy Star qualified, UL and HVI certified for performance assurance.Acceptable for use over a bathtub or shower when installed in a GFCI-protected branch circuit..
Check Stock

Sealproof Fan Brace - Electrical Box and Support Bar for Ceiling Fans and Light Fixtures, New Installations and Remodels

  • The Sealproof Bar Hanger Mount Box provides simple and safe installation of a ceiling fan or light fixture with secure attachment to a ceiling joist. Can be used with engineered truss..
  • Attic access ideal - mounting bracket for use in new constructions or remodels. Fits all ceiling fans. Fan support of up to 70 lb..
  • Fits 16" to 24" ceiling joists. The mounting bracket can be installed in finished ceilings through a hole large enough to fit the box..
  • Fixture Support for 16" Centers is 150 lbs. Fixture Support for 24" Centers is 90 lbs..
  • Mount Box Includes 4 Conduit Knockouts. Includes protection cap for use during installation or painting..
Check Stock

Tech Drive Very-Quiet 80 CFM, 1.5 Sone No Attic access Needed Installation Bathroom Ventilation and Exhaust Fan

  • Very quiet bathroom fan (1.5 sones) and Strong air movement (80CFM) for bathroom up to 85 Sq. Ft.
  • Easy-to-Install: No cut housing with no attic access installation and replaces most small bathroom standard fans using existing opening. it can be done entirely from the room-ceiling side – no attic access needed installation.Please note that the housing height of this fan is 6 inches. If you replace an old fan with a housing height of 4 inches, make sure that the ceiling is installed deep enough before replacing..
  • Housing size: 7.5in x 7.25in x 6in with 4in duct. ceiling mounting Opening: 7.6in x 7.3in..
  • Efficient and quiet,excellent motor perfomance, working at least 25000 hours.
  • Energy Star qualified, UL and HVI certified for performance assurance.Acceptable for use over a bathtub or shower when installed in a GFCI-protected branch circuit..
Check Stock