BJTDLLX 12 Steps Wall Mounted Folding Stairs, Attic Steps Pull Down Attic Stairs Retractable Attic Ladder Al-Mg Alloy Loft Ladder Stairs 3m Height Attic Steps with Armrests (Weight Capacity 1000lb)
- 【Attic Wall Stairs】Wall-mounted attic wall staircases are becoming more and more popular recently due to their simplicity, elegance, practicality, retractability and small footprint. Attic Wall Ladder Stairs meet most people's needs for a stylish and uncluttered lifestyle..
- 【Wall Mounted】This attic wall ladder is wall mounted, the frame size is 60x70cm (please refer to the picture), the drop-down attic staircase can install the frame on the vertical wall or vertical plane, but cannot be installed on the ceiling and pulled from the ceiling down..
- 【12 Steps】The 12-step drop-down attic staircase aluminum has a maximum vertical height of 3 meters/9.8 feet and a step width of 43 cm/16.93 inches. Wall Mounted Loft Wall Ladder Stairs can be used with a simple pull down. You can remove steps to lower the maximum height..
- 【1000lb Load Capacity】The maximum load capacity of wall mounted attic stairs is 1000 lbs, the step ladder can be widely used in attics and cabin tops, making it easier for you to go up and down the stairs (for your safety, please do not stand multiple people at the same time)..
- 【Aluminum-magnesium Alloy Material】The attic wall ladder stairs are made of aluminum-magnesium alloy material, which is stable in quality, d....
Check Stock
INTSUPERMAI Attic Ladder Loft Stairs 12 Loft Steps Ladder Folding Stairs Foldable Attic Stairs Pull Down with Aluminum Alloy Scissor Stair Structure No handrail 9.8ft Height Blue
- √1. -- Wall-mounted Pull Down Ladder -- This Loft Wall Attic Ladder is Wall Mounted Type. It CAN NOT be installed on the ceiling and pulled down from the ceiling. It should be installed on beams or the vertical plane of the highest part of the vertical wall. Please note This ladder has No handrail..
- √2. -- 12 Loft Steps -- The Max vertical height stretched out is 3m/9.8ft. This is the max safe height of the aluminum-magnesium structure and this type of ladder. This ladder comes with 2 separate steps. Before installing these 2 steps, the max height of the ladder is 2.5 m/8.2 ft, and after installation it is 3 m/9.8ft..
- √3. -- Al-Mg Alloy Material -- The loft stairs ladder is made of aluminum-magnesium alloy material, its structure is more stable and light than carbon steel material. The surface of the ladder adopts electrostatic spraying technology, which is stable in quality and more durable. fashionable and beautiful, it can be matched with various styles of decoration and furniture..
- √4. -- Large Bearing Capacity -- This attic stairs has a thicked S-shaped strings design to enhance the bearing capacity, its load-b....
Check Stock
VEVOR Attic Steps Pull Down 12 Steps Attic Stairs Alloy Attic Access Ladder, White Pulldown Attic Stairs, Wall-mounted Folding Stairs for Attic, Retractable Attic Ladder with Armrests, 9.8 feet Height
- S Bent Finishing Skeleton: The special S-bent skeleton form and stainless steel thicken rivets on both sides of the attic access ladder make the ladder connection firm to ensure a Max. loading capacity: 660 lbs. Also, the bracket and tread of the attic access ladder are made of high-quality Al-Mg alloy, which are anti-wear and rustproof..
- Space Saver: The attic ladder features a retractable structure with two galvanized Mn-steel springs with high elasticity, easy to pull down. You can fold the stairs when not in use, saving a lot of space. It has a total of 12 stairs, up to 11.2 ft/3.4 m. Whether you are going up or down, our stairs will be there to support you..
- Considerable Details: The loft ladder is equipped with two handrails to make you more secure and reduce fatigue when going upstairs. Besides, the anti-skid rubber pads and widen anti-skid pedal provide excellent stability for you. The pull rod can help you pull down the ladder easier..
- Easy to Assemble: This wall-mounted type attic ladder is easy to install. You can install it directly on the vertical wall next to the ceiling opening. Just follow these simple steps as the picture shows. You will be walking up and down your stairs in no time..
- Various Applications: The compact attic stairs can be....
Check Stock
VEVOR Attic Steps Pull Down 12 Steps Attic Stairs, Alloy Attic Access Ladder, Blue Pulldown Attic Stairs, Wall-mounted Folding Stairs for Attic, Retractable Attic Ladder with Armrests, 9.8 feet Height
- S Bent Finishing Skeleton: The special S-bent skeleton form and stainless steel thicken rivets on both sides of the attic access ladder make the ladder connection firm to ensure a Max. loading capacity: 660 lbs. Also, the bracket and tread of the attic access ladder are made of high-quality Al-Mg alloy, which are anti-wear and rustproof..
- Space Saver: The attic ladder features a retractable structure with two galvanized Mn-steel springs with high elasticity, easy to pull down. You can fold the stairs when not in use, saving a lot of space. It has a total of 12 stairs, up to 11.2 ft/3.4 m. Whether you are going up or down, our stairs will be there to support you..
- Considerable Details: The loft ladder is equipped with two handrails to make you more secure and reduce fatigue when going upstairs. Besides, the anti-skid rubber pads and widen anti-skid pedal provide excellent stability for you. The pull rod can help you pull down the ladder easier..
- Easy to Assemble: This wall-mounted type attic ladder is easy to install. You can install it directly on the vertical wall next to the ceiling opening. Just follow these simple steps....
Check Stock
VEVOR Attic Steps Pull Down 12 Steps Attic Stairs Alloy Attic Access Ladder, Black Pulldown Attic Stairs, Wall-mounted Folding Stairs for Attic, Retractable Attic Ladder with Armrests, 9.8 feet Height
- S Bent Finishing Skeleton: The special S-bent skeleton form and stainless steel thicken rivets on both sides of the attic access ladder make the ladder connection firm to ensure a Max. loading capacity: 660 lbs. Also, the bracket and tread of the attic access ladder are made of high-quality Al-Mg alloy, which are anti-wear and rustproof..
- Space Saver: The attic ladder features a retractable structure with two galvanized Mn-steel springs with high elasticity, easy to pull down. You can fold the stairs when not in use, saving a lot of space. It has a total of 12 stairs, up to 11.2 ft/3.4 m. Whether you are going up or down, our stairs will be there to support you..
- Considerable Details: The loft ladder is equipped with two handrails to make you more secure and reduce fatigue when going upstairs. Besides, the anti-skid rubber pads and widen anti-skid pedal provide excellent stability for you. The pull rod can help you pull down the ladder easier..
- Easy to Assemble: This wall-mounted type attic ladder is easy to install. You can install it directly on the vertical wall next to the ceiling opening. Just follow these simple steps as the picture shows. You will be walking up and down your stairs in no time..
- Various Applications: The compact attic stairs can be....
Check StockWerner 55-1 Attic Ladder Replacement Hinges
- Werner 55-1: Fits all Werner made attic ladders 2006 and Older..
- If you don't have a Werner attic ladder the 55-1 will not work on your attic ladder..
- The 55-1 includes (2) hinge arms, Hardware, & Instructions..
- Pivot Plates are not included with the 55-1..
- Use existing pivot plates or don't use them at all, more information in the 55-1 instructions..
Check Stock
INTSUPERMAI Attic Ceiling Ladder Black Loft Wall Ladder Stairs with Height 10 ft Ceiling Mounted Load Capacity 660 Pounds Pulling Down from Ceiling (27.6 x 47.2 inch)
- 【Ceiling-mounted Type】--This Attic Ceiling Ladder is Ceiling Mounted Type. It CAN NOT be installed on the vertical wall and it should be installed on the ceiling. It can be simply pulled down from the ceiling or put away, which is very convenient..
- 【3m/10ft Height】--Maximum vertical height stretched out is 3m/10ft. The length of the ladder when fully opened is about 3.4m. After opening, the distance between the support feet and the wall is about 1.4m. If you need a height below 3m/10ft, you can remove the steps to reduce the maximum height..
- 【Opening Size】--Ceiling Opening Hole Size: 700 x 1200mm/ 27.6 x 47.2 inch. Thickness of the ceiling: 100-200mm/3.94-7.87in. The distance between opening hole and the wall should be greater than 50mm/2in. Please confirm these sizes before ordering..
- 【Heavy Loading Capacity】--Max. loading capacity: 660 lb. But this does not mean that this attic ladder can stand on several people at a time. For your safety, please go up this ladder one by one..
- 【Application】--It can be used when the ladder is pulled down. It is suitable for the attic, roof top, company, warehouse, hospital, school, etc. It is ideal for installation and modification of the house. This attic ladder can be suitable for indoor and outdoo....
Check StockLadder Werner 55-1 - Attic Spreader Hinge Arms - MFG 2006 and Older - (Pair)
- Werner 55-1: Fits all Werner made attic ladders 2006 and Older..
- If you don’t have a Werner attic ladder the 55-1 will not work on your attic ladder..
- The 55-1 includes (2) hinge arms, Hardware, & Instructions..
- Pivot Plates are not included with the 55-1..
- Use existing pivot plates or don’t use them at all, more information in the 55-1 instructions..
Check Stock
Attic Ladder
- Space Saving: Attic Folding Ladder's flexible S-shaped rope and springs provide you with easy folding and unfolding. Widened treads make the attic drop-down stairs more convenient and safer for you to go up and down stairs.
- Attic telescopic ladder: new thicker. Non-slip stability is safer. Reinforced reinforcement is more durable. High temperature electrostatic spraying process..
- Non-slip stability and safer: easy to fold. Easy to operate. Wider and more stable. super stable. Safe and reliable. It can carry the weight of 5-6 people at the same time..
- Aluminum-magnesium alloy material: the surface adopts electrostatic spraying technology, which is fashionable and beautiful, and can be matched with various styles of decoration, toasting is durable and does not take up space.
- installation steps. : 1. Insert the lasso rod into the lock hole.
- 3. Fix the screws at the four corners of the frame and tighten them.
- 4. Pull up the ladder with a rope and fix the hole.
- 5. Screw Put it on the triangular plate and tighten the nut.
Check Stock
Telescopic Ladder Attic Ladder Pull Down Attic Ladder Alloy Attic Stairs 12 Steps Loft Ladder 10.17FT Wall-Mounted Collapsible Ladder with Armrests (Blue)
- ...etractable attic stair is wall-mounted and firmly fixed to the wall without any movement. This not only saves space but also ensures that the stair does not slide when you use it. (NOTE: Cannot be installed on the ceiling).
- Large Load Capacity: The titanium magnesium alloy ladder, PVC base and thickened 1.18" pedals make the ladder can load a maximum of about 1102.3 lbs. It can withstand the weight of most people or objects and is safer to use.The PVC base and non-slip rubber pads make the stair very stable..
- Strong and Durable: This attic ladder is made of high-quality titanium magnesium alloy with wear-resistant, rust-resistant features, and is more durable than ordinary steel. Aluminum rivets are not easy to rust, so they can hold the ladder stably. These materials improve the quality and extend the service life of our attic stair..
- Retractable: The S-shaped design and two high manganese steel springs give this stair a retractable structure. You can use the pull rod to put it down when you need it or fold it anytime when not in use..
- Application: This wall-mounted retractab....
Check Stock
INTSUPERMAI Attic Loft Stairs Folding Loft Ladder Stairs Wall Mounted Type Attic Stairs Pull Down with Aluminum Alloy Structure 10+2 Steps for Home Refit Narrow Wall 10ft Height No Handrail Black
- 【Wall-mounted Type】--This Loft Wall Attic Ladder is Wall Mounted Type. It CAN NOT be installed on the ceiling and pulled down from the ceiling. It should be installed on beams or the vertical plane of the highest part of the vertical wall..
- 【12 Steps & 3m/10ft Height】-- Maximum vertical height stretched out is 3m/10ft. This is the maximum safe height of the aluminum-magnesium structure and this type of ladder. This ladder comes with 2 separate steps. Before installing these 2 steps, the maximum height of the ladder is 2.5 m/8.2 ft, and after installation it is 3 m/10 ft..
- 【Al-Mg Alloy Material】-- The loft wall ladder stairs is made of aluminum-magnesium alloy material, its structure is more stable and light than carbon steel material on the market. The surface of the ladder adopts electrostatic spraying technology, which is stable in quality and more durable. Fashionable and beautiful, it can be matched with various styles of decoration and furniture..
- 【Strong Bearing Capacity】-- The Max. loading capacity is 660 lb/300kg. But for the safety, people should go up one by one. When it is fully extended, the bottom of the ladder is is 1.3-1.4 m (4.3-4.6 ft) away from the wall, which has a certain stability..
Check StockECOTRIC Attic Ladder Spreader Replacement Hinge Arms Kit for Werner 55-1 2006 and Older Pair
- This kit is the part that helps you replace older, If you don't have a Werner attic ladder the 55-1 will not work on your attic ladder..
- Fitment: Fits Models Manufactured Before February 2006 ,Models Mk 1 thru Mk 3. If you are not sure whether this product is suitable for your ladder,....
- Package Included: 2 X hinge arms and needed Hardware shown in pics..
- Note: springs are not included with the 55-1. Pivot plate is not included..
- Be sure to check your ladder for model number before placing your order. Please feel free to contact us, we will give you a excellent shopping....
Check StockFAKRO LWN 25inx54in Wooden Basic Non-Insulated Attic Ladder 250lbs 10ft 1in
- 3/8" thick particleboard door with string Safety grooves are cut into the treads to prevent slipping Steps do not protrude over the ladder surface When attic stairs door opens, side springs fall along with it allowing wider and more comfortable entrance to the attic (the widest entrance on the market) Light weight and groundbreaking method of the hatch catching onto a "click fastener" allows for attic ladder installation by one person New design guarantees greater stiffness and stability of the.
Check Stock
