Reviews At202mic Stand Mount

Audio Technica AT2035 Microphone with Knox Gear Pop Filter, Boom Arm and XLR Cable Bundle (4 Items)

  • [Strong Compatibility] :For at2020 and At2035 mic boom arm adapter wide compatibility 3/8'' to 5/8'' Screw adapter are line with industry standards.This stand not only compatible with at2020 and At2035 mic, but also suitable for mount most standard-sized microphones..
  • [Easy to use]:This at2020 and At2035 mic Microphone boom arm is simple to set up and demount, you can easily move and carry the microphone stand.Compatible with at2020 and At2035 mic,Suitable for voice-over, Video recording, broadcasting, TV stations for you additional convenience..
  • [Heavy Duty Steel Structure]: Super-strong spring with extra positioning screw, compact microphone arm stand designed for at2020 and At2035 Microphone carry,sturdy enough to keep mic well placed. Max load: Approx.2pound/1kg..
  • [Rugged desk mount]: In comparison to the old versions, this at2020 and At2035 zinc alloy desk mount is built with anti-scratch pad and wider mouth up to 2 inch/5cm to fit most desktop to fix the base..
  • [Various accessories]: The set not includes at2020 and At2035 Microphone.The set includes 1 x at2020 mic boom arm, 1 x Desk clamp, 1 x 3/8" to 5/8"Adapter, 3 x Cable tie..
Check Stock

Rockville RCM03 Studio Recording Condenser Microphone+Shock Mount+Pro Boom Arm

  • Package Includes: (1) Rockville RCM03 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount, (1) Rockville ROGAN STAND Pro Boom Arm Mic Stand with Fixed Mount+Desk Stand+Cable.
  • Features of RCM03: Rockville RCM03 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount, Aluminum high quality construction, Polar Pattern: Internally Polarized Condenser Cardioid Design, Large diaphragm for smooth, natural sound and low noise, Power Requirements: 48V DC Phantom Power, Uni-directional, Sensitivity: -27dB±2dB(0dB=1V/Pa at1kHZ), Output impedance: 200O±30%(at 1kHz),.
  • Standard operating voltage: 3V, Operating voltage range: 1.5V-10V, Current consumption: less than 500uA, Voltage deduction characteristic: within 3dB at 2V, S/N ratio: More than 24dB, Frequency Response: 30Hz - 20 KHz, Fixed Crossover Filter cutoff frequency: 40Hz---16 KHz, Load impedance: Greater or = to 1000 Ohms, Equivalent Noise level: Less than 18dB A (IEC581-5), Max. Input SPL: 126dB(THD=1.0% at 1kHZ), Electrical current: Greater than 4.8Ma.
  • Features of ROGAN STAND: Rockville ROGAN STAND Pro Boom Arm Mic Stand, Includes XLR cable built into the stand that is hidden inside the stand for a clean look, Deluxe pro version is one solid piece with no visible springs and an advance....
Check Stock

Rockville GIGSTAND DUAL Microphone+Tablet/Smartphone Mic Stand For Karaoke Party

  • Package Includes: (1) RockvilIe GIGSTAND DUAL Microphone Stand with (2) Mic Clips and Detachable Boom. (1) RockvilIe IPS22 Smartphone/Tablet Mount - Screws In To any Mic Stand or Boom Arm. Applications: Guitar singer/songwriter (one mic for vocals and the other mic for the guitar). Studio recording use such as stereo mic arrays. Drum mics (you can mic any 2 drums with the one stand). Live performances.
  • With the lpad mount you can also mount your lpad and mic onto one stand which is perfect for speeches, sheet music playback, and more. Features: RockvilIe GIGSTAND DUAL Microphone Stand with (2) Mic Clips and Detachable Boom. The large vertical pole adjusts from 31 inch - 55 inch height. Holds 2 microphone securely in place. Foldable tripod legs with rubber grip feet. The stand includes 2 microphone clips for dual microphone mounting. One mic mounts on the large vertical pole.
  • The second mic mounts on the boom arm pole. The boom arm extends 26.37 inches and rotates 360. The boom arm is fully detachable. Premium painted steel will last through years of continuous wear. Light-weight and strong makes it perfect to take to any gig. The stand tubes are 20 mm thick for the bottom tube, and 15mm for the top tube. Includes 2 cable management clips for running ca....
Check Stock

SUNMON AT2020 Shock Mount Shock Mount Stand Reduces Vibration Noise for Audio Technica AT2020 AT2035 AT4040 AT2020USB ATR2500x Condenser Micphone

  • Suspension shock mount mic holder isolates condenser mics from most physical vibration, floor noise. Like floor tapping, desk bumping, adjusting the....
  • Shockmount made of elasticity rope, the plastic shock mount prevents the microphone from falling all-around and makes your AT2020 microphone more....
  • Widely used for Audio Technica AT2020 AT2035 AT4040 AT2020USB ATR2500x condenser mic..
  • The angle-adjustable 3/8" to 5/8" screw adapter is easily attached to any universal mic boom arm or mic stand..
  • Fits microphone diameter ranging from 1.9" to 20."（ Φ47mm-51mm）. Package: 1 x Shock Mount..
Check Stock

Rockville Gaming Streaming Twitch Mic Stand w/Gooseneck+Weighted Base+Shockmount

  • Package Includes: (1) RockvilIe RDMS6 Studio Desktop Mic Stand w 11.8" Gooseneck+Round Weighted Base. (1) RockvilIe R-Shock Black Studio Condenser Microphone Metal Shock Mount w/Foam. Features of RDMS6: RockvilIe RDMS6 Studio Desktop Mic Stand with 11.8" Gooseneck and Round Weighted Base.
  • 11.8 Gooseneck is Stiff and Sturdy Yet Bendable in Any Direction For Extreme Stability and Durability. 6.5 Heavy-Duty Round Weighted Base Makes This Stand Super Sturdy. Professional Stand is Perfect for Studio, Podcasting, and Many Other Applications. Includes Standard Mic Clip for Regular Mics.
  • 5/8 Threading Fits Any Standard Mic. Includes a Metal 3/8" to 5/8" Adapter to Support Any Mic Clip or Shock Mount on the Market. For Condenser Mics This is Compatible With Any Shock Mount (RockvilIe Rockshock is Recommended).
  • Compatible With RockvilIe IPS22 Phone/Tablet Holder (Sold Separately in Our Store). Features of R-Shock BLACK: RockvilIe R-Shock Studio Condenser Microphone Metal Shock Mount with Foam in Black. Perfect for studio recording, podcasting, broadcasting, and more. Angle adjustment with locking knob.
  • Fits microphone diameters ranging from 43mm - 48mm (1.6 inches to 1.89 inches). Foam insert holds and protects microphone. Fits any microphone stand! Standard 5/8" ....
Check Stock

Rockville Gaming Streaming Twitch Mic Stand+Gooseneck Base+Shockmount+Pop filter

  • Package Includes: (1) RockvilIe RDMS6 Studio Desktop Mic Stand w 11.8" Gooseneck+Round Weighted Base. (1) RockvilIe R-Shock Black Studio Condenser Microphone Metal Shock Mount w/Foam. (1)RockvilIe RockPop Double Screen Recording Mic Pop Filter w/Metal Gooseneck Clamp. Features of RDMS6: RockvilIe RDMS6 Studio Desktop Mic Stand with 11.8" Gooseneck and Round Weighted Base. 11.8 Gooseneck is Stiff and Sturdy Yet Bendable in Any Direction For Extreme Stability and Durability.
  • 6.5 Heavy-Duty Round Weighted Base Makes This Stand Super Sturdy. Professional Stand is Perfect for Studio, Podcasting, and Many Other Applications. Includes Standard Mic Clip for Regular Mics. 5/8 Threading Fits Any Standard Mic. Includes a Metal 3/8" to 5/8" Adapter to Support Any Mic Clip or Shock Mount on the Market. For Condenser Mics This is Compatible With Any Shock Mount (RockvilIe Rockshock is Recommended).
  • Compatible With RockvilIe IPS22 Phone/Tablet Holder (Sold Separately in Our Store). Features of R-Shock BLACK: RockvilIe R-Shock Studio Condenser Microphone Metal Shock Mount with Foam in Black. Perfect for studio recording, podcasting, broadcasting, and more. Angle adjustment with locking knob. Fits microphone diameters ranging from 43mm - 48mm (1.6 inches to 1.89 inches....
Check Stock

Microphone Shock Mount with Pop Filter, PEMOTech Mic Anti-Vibration Suspension Shock Mount Holder for 46mm-53mm Diameter Microphone, Compatible for AT2020 Microphone Shock Mount Bonus Screw Adapter

  • 【Shock Mount with Pop Filter Kit】Shock mount for most condenser microphones. Package includes all the items you need to get better audio performance results. A microphone shock mount with a pop filter, standard metal screw adapter and extra two rubber ropes(as replacement). Owning it will making your broadcast or singing voice sounds more pleasant..
  • 【Excellent Mic Stand】Mic shock mounts are made of quality metal and high elasticity wrap roping design, isolates mic from physical vibration, floor, and stand noise, prevent unwanted movement of the microphone when you are recording. The added foam pad to the microphone clamp to all-around prevent the microphone from damage and scratches..
  • 【Three Layers Pop Filters】Pop filter designed with double net layer structure, foam layer, metal net layer, ''U-shaped'' pop filter can effectively reduces the plosive, pops, crackles, wind interference, breath sounds from front and both side. Helps get your best vocal recordings. It can prevent your microphone from saliva spraying and dust..
  • 【Microphone Shock Mount for Universal Mic Boom & Stand】Handy and quick to assemble and disassemble from the microphone by pushing the metal handle, adjust the angle by locking knob. The mic shock mount is a standa....
Check Stock

Tascam Dynamic Microphone for Professional Podcasting and Live Streaming (TM-70)

  • The TM-70 gives you more of your voice, and less of the room.
  • Super Cardioid Directivity adapts to the environment so the voice is more clear and prominent for an easier mix.
  • The TASCAM TM-70 Dynamic Microphone delivers mix-ready, no-fuss audio so you can focus on capturing the performance rather than tweaking EQ settings.
  • Package Includes a Shock Mount, Table-Top Mic Stand, and Mic Cable.
  • Included are essential microphone accessories - a shock mount to reduce low frequency rumble, 6-foot mic cable and table-top mic stand - allowing you to set up at your desktop and record right away.
Check Stock

SUNMON Microphone Wall Mount and Metal Table Mounting Clamp, Universal Microphone Boom Arm Stand Compatible with HyperX QuadCast, Blue Yeti, Blue Snowball, Shure SM58 Microphone

  • Widely Compatible: The adjustable arm comes with a standard 3/8" to 5/8" adapter for different shock mounts and microphones. (Note: The microphone and shock mount are not included.).
  • Double Microphone Mount: The boom arm stand contains two different mic mount, wall mount and table mounting clamp. Satisfy the use of multiple scenarios..
  • Mic arm stand: The stand arm can be extended up to 26.8"/68cm. Max support weight is 3 Pound (1.4 KG)..
  • Upgraded Clamp: The table mounting clamp cab easily clip to 2.36''/60mm thick deskwith 0.47in/12mm hole for mic arm. The microphone wall mount set can Install on the wall, solve the limitation that your desk cannot be installed. (Drill Bit Hole diameter: 15/64" /5.95 mm）.
  • Package Included: 1x Mic Scissor Arm Stand, 1x Table mounting clamp, 1x Microphone wall mount set, 1x Screw adapter (3/8" to 5/8" match most microphones and shock mount), 1x Mic clip. Note: NOT INCLUDED MICROPHONE AND SHOCK MOUNT..
Check Stock

Rockville iSTAND 85 Dual Desktop Boom Arm + Gooseneck Mic/iPhone/iPad Stand

  • What's in the Box: Dual Stand. Smartphone/tablet holder that attaches to either the gooseneck or the boom arm. Mic clip that attaches to either the gooseneck or the boom arm. 5/8” to ¼” webcam adapter that attaches to either the gooseneck or the boom arm. 3/8” to 5/8” mic adapter for use with any mic clip or shock mount.
  • Rockville iSTAND 85 Dual Desktop Boom Arm + Gooseneck Mic/iPhone/iPad Stand. Combo stand with boom arm and gooseneck so you can use multiple devices at the same time. You can use any 2 attachments at the same time (mic clip, tablet/phone holder, web cam adapter). Heavy duty steel weighted base . Boom arm has 2 arms that both can bend allowing for the ultimate adjustment flexibility..
  • Boom arm is 12.6” + 11”. 11.8” Gooseneck is Stiff and Sturdy Yet Bendable in Any Direction For Extreme Stability and Durability . Gooseneck is detachable. Professional Stand is Perfect for Studio, Podcasting, and Many Other Applications . All black design! Even the gooseneck is black. This looks great in a kitchen or on your computer desk. For Condenser Mics – This is Compatible With Any Shock Mount (Rockville Rockshock is Recommended). 5/8” Threading Fits Any Standard Condencer Mic.
  • Features of the tablet/phone holder: (2) 360 degree rot....
Check Stock

Microphone Stand, RenFox Adjustable Mic Stand Desk Suspension Scissor Arm Mic Boom Arm for Blue Yeti, Snowball & Other Mics for Professional Streaming, Voice-Over, Recording, Games

  • 【Professional Heavy-duty Mic Stand】 Sturdy metal frames with strong springs to give extra support, hold your mics firmly, and reduce noises and vibrations effectively. Double suspension springs on each boom arm are secured with heavy duty steel tripods, making your mic stand have a more better load-bearing capacity.(Max Support Weight is 4.4 lbs)..
  • 【Flexibility & Applicability】 The microphone boom arm can rotate 360 degrees left and right and Move up and down 180°. With its upgraded clamp and protective cushion, the microphone arm fits on tables up to 2.1 inches thick.This mic boom arm set also includes a 3/8” to 5/8” screw adapter to suit most microphones. The mic stand can work perfectly with Blue Snowball and most other microphones..
  • 【Compatible Mic Shock Mount】The diameter of the microphone shock mount can be changed by adjusting O-rings on shock mount compatible various mic. Max diameter:1.77 inches. It can be used to hold your microphone, and isolates it from noises caused by vibrations and boom movement. (Note: Shock Mount only fit for some Blue Yeti)..
  • 【Double Pop Filter & Mic Cap】Double layered stretchy nylon with a robust plastic outer ring for high performance, this pop filter can be bent or adjusted as needed with the fl....
Check Stock

Rockville PC Gaming Streaming Twitch Bundle RCM03 Microphone+Headphones+Boom Arm

  • Package Includes: (1) RockvilIe RCM03 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount. (1) RockvilIe DMS40 40" Microphone Boom Arm Studio Podcast USB Mic Stand+Desk Clamp. (1) RockvilIe PRO-M50 Studio Headphones w/ Detachable Coil Cable, Case+Extra Ear Pad. RCM03 Condenser Microphone (made of aluminum!). 100% Copper 10 foot 3.5mm jack to XLR cable to connect mic to your computer or other device. 100% Copper 10 foot XLR to XLR cable to connect to any mixer with phantom power.
  • Metal shock mount. Metal Anti-wind foam cap. Owners Manual. Warranty card. Features: RockvilIe RCM03 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount. Aluminum high quality construction. Polar Pattern: Internally Polarized Condenser Cardioid Design. Large diaphragm for smooth, natural sound and low noise. Power Requirements: 48V DC phantom power or computer sound card (can connect to the phantom power channel of your mixer or can connect to your laptop or computer).
  • Uni-directional. Sensitivity: -27dB2dB(0dB=1V/Pa at1kHZ). Output impedance: 2000%(at 1kHz). Standard operating voltage: 3V. Operating voltage range: 1.5V-10V. Current consumption: less than 500uA. Voltage deduction characteristic: within 3dB at 2V. S/N ratio: More than 24dB. Frequency Resp....
Check Stock

Microphone Stand, WOSTOO Mic Stand Desk Boom Arm with Fill Light Professional Microphone Boom Arm Scissor for Blue Snowball & Most Other Mics for Live Streaming Recording Singing Home Studio

  • 【Mic Arm Stand Kit】 Our mic boom arm set comes with an upgraded sturdy metal frame, which can not only give your microphones a reliable support but also can reduce noise and vibration effectively. With the protection cushion, this mic boom arm stand can fit on tables up to 2.1 inches thick..
  • 【Extra Ring Light & Shock Mount】 The microphone arm specially combines a fill light with 3 modes and 10 brightness levels. This desk mic stand has a shock mount whose diameter can be adjusted to suit various mics by the O-rings (Max Diameter is 2.05 inches and Not for Blue Yeti).
  • 【Great Flexibility & Compatibility】The microphone suspension boom arm can rotate 360 degrees while offering a horizontal reach of 27 inches, and includes a 3/8” to 5/8” screw adapter to suit most microphones. This mic arm stand works nicely with Blue Snowball and most other mics..
  • 【Double-Layered Pop Filter & Mic Cap】 For higher performance, our mic stand boom also has a pop filter to prevent pops or breathing from hitting the mic. It is built with double layered stretchy nylon and a robust plastic ring. And the kit includes a foam mic cover to protect your mics..
  • 【All-in-One Desk Boom Arm Kit】 This mic stand desk kit includes 1 x microphone arm stand, 1x fill light....
Check Stock